To avoid these ads, REGISTER NOW!

Jeep Garage spray paint can stoarge cabinet

thdewey

Well-known member
Joined
Feb 26, 2008
Messages
532
Location
Gastonia, NC
I was inspired by the spray paint can storage thread a few weeks ago.

I wanted an enclosed cabinet that was simple and looked really neat.

Here is how I began the project. I had some scrap 2x4s, 1x4s and 1/2" plywood. I came up with a plan to use what I had laying around.

-God help me I misspelled 'storage' in the thread title.
 

Attachments

  • IMG_0674.jpg
    IMG_0674.jpg
    139.7 KB · Views: 156
  • IMG_0675.jpg
    IMG_0675.jpg
    135.7 KB · Views: 124
  • IMG_0677.jpg
    IMG_0677.jpg
    132.3 KB · Views: 123
  • IMG_0678.jpg
    IMG_0678.jpg
    135.1 KB · Views: 190
Last edited:
To avoid these ads, REGISTER NOW!
OP
T

thdewey

Well-known member
Joined
Feb 26, 2008
Messages
532
Location
Gastonia, NC
Re: Jeep Garage spray paint can storage cabinet

Yes, the door is the part on the right. It is hinged to enclose the other half. The bottom section has plenty of room for 3 or 4 gallon size containers.
 

Attachments

  • IMG_0681.jpg
    IMG_0681.jpg
    134.9 KB · Views: 93
  • IMG_0680.jpg
    IMG_0680.jpg
    133.9 KB · Views: 96
  • IMG_0679.jpg
    IMG_0679.jpg
    135.5 KB · Views: 81
OP
T

thdewey

Well-known member
Joined
Feb 26, 2008
Messages
532
Location
Gastonia, NC
Here are some pics of the cabinet mounted on the wall.

I added a shelf so that when stuff accumulates, I can still open the door without spilling the stuff on top. A piece of scrap trim hides the plywood edge.
 

Attachments

  • IMG_0728.jpg
    IMG_0728.jpg
    119.9 KB · Views: 151
  • IMG_0726.jpg
    IMG_0726.jpg
    126.5 KB · Views: 167
  • IMG_0724.jpg
    IMG_0724.jpg
    135 KB · Views: 170
  • IMG_0723.jpg
    IMG_0723.jpg
    136.7 KB · Views: 183
  • IMG_0683.jpg
    IMG_0683.jpg
    124.1 KB · Views: 154
  • IMG_0682.jpg
    IMG_0682.jpg
    144.3 KB · Views: 168
  • IMG_0730.jpg
    IMG_0730.jpg
    138.1 KB · Views: 151
To avoid these ads, REGISTER NOW!

Jack Olsen

Super Moderator
Staff member
Joined
Mar 22, 2009
Messages
6,678
Location
Los Angeles
That's pretty great. I like the idea of the useable top -- and the puzzle piece match at the bottom is very smart.
 

Steve in Mi

Well-known member
Joined
Mar 13, 2007
Messages
1,042
Location
Mid Michigan
The effort is commendable, the color impeccable plus I like the blend with the cabinet above. One might almost expect a mini-bar behind the door.

Now, FWIW, I see the dowel retainers went bye-the-bye and in my opinion the replacement won't make it easy to add or remove the cans either. I'd suggest that the retainers strips are not needed in the stationary portion of the cabinet unless it's earth quake action you are guarding against. On the swinging door side perhaps recessing a thin strip of wood across at the base of the cans and a spring (like the old screen door closer type) stretched across at slightly higher than midbelt could keep the cans on the shelf but easier to access. And, maybe not!
 
OP
T

thdewey

Well-known member
Joined
Feb 26, 2008
Messages
532
Location
Gastonia, NC
That's pretty great. I like the idea of the useable top -- and the puzzle piece match at the bottom is very smart.

Thanks. The puzzle piece at the bottom was a happy accident. I didn't leave enough room to get gallon size bottles into the lower section. Luckily I figured this out before I glued and screwed it all together. I just laid out the cut out section and used a jig saw to cut it out. I attached the cutout section with wood brackets. I really like the way it came out.

The effort is commendable, the color impeccable plus I like the blend with the cabinet above. One might almost expect a mini-bar behind the door.

Now, FWIW, I see the dowel retainers went bye-the-bye and in my opinion the replacement won't make it easy to add or remove the cans either. I'd suggest that the retainers strips are not needed in the stationary portion of the cabinet unless it's earth quake action you are guarding against. On the swinging door side perhaps recessing a thin strip of wood across at the base of the cans and a spring (like the old screen door closer type) stretched across at slightly higher than midbelt could keep the cans on the shelf but easier to access. And, maybe not!

Yeah, I had to remove the dowels. Argh, there was not enough room to get the cans in and out. I ended up using PVC plumbing strapping. It's really thin, flexible and works well. I may in the future do as you suggest, inlay a wood strip in the door section. Thanks.
 

Bevis

Well-known member
Joined
Jan 10, 2006
Messages
808
Location
Moore Haven, Florida
That looks good. I've started to look for something along these lines for my spray cans, quart and gallon cans. The filing cabinet I had worked good but was bulky and hard to open after one of the middle drawers broke. :thumbup:
 
To avoid these ads, REGISTER NOW!
Top Bottom