236EFSET Contents

[Spudland_Dave]

Anybody have a breakdown of the individual sockets in the legendary 236EFSET?
Recently got the PB161 case with the intention of nickel & diming myself a complete set a couple sockets at a time (unless some promo's pop up on the truck). I currently have a mix & match of CMan and Armstrong so its not a show stopper to need em all right now.

The Hex & Torx seem easy enough to figure out, which #2 Phillips and Flat are included?

 

[RGunner]

I did the same thing.

Does this help?

http://www.ebay.com/itm/261166680887?item=261166680887&cmd=ViewItem&vxp=mtr

I used the FTXR tamper bits in my set.

 

[Spudland_Dave]

Thanks...it does a bit. Using that pic and my case I've got all the Hex & Torx taken care of (Speced out the Heavy Duty Torx vs Normal)...I'll post up what I got. BUT that still leaves the Phillips & Flat as mysteries...anybody with a PN for what Snappy has in the set?

 

[Hiball]

Thanks...it does a bit. Using that pic and my case I've got all the Hex & Torx taken care of (Speced out the Heavy Duty Torx vs Normal)...I'll post up what I got. BUT that still leaves the Phillips & Flat as mysteries...anybody with a PN for what Snappy has in the set?

Just 1 standard flat and 1 #2 Phillips. I guess if you need actual part numbers I can check mine next time I'm at the shop.

Although IRC I think I replaced those bits with the next bigger sized hex sizes. I don't find myself using standard/Phillips bits outside of my hand impact, which are stored in that case.

 

[Spudland_Dave]

Just 1 standard flat and 1 #2 Phillips. I guess if you need actual part numbers I can check mine next time I'm at the shop.

Thanks I'd appreciate that. Looking at the catalog, there's a plethora of Flat & Phillips variants..at least with the "genuine" PN# I can see what physical size they are and order accordingly...For example on the Phillips I'd probably go with an ACR type instead of plain Phillips.

**Edit...if I were a betting man, I'd say its probably a Flat. F42E and Phillips FP22E??

 

[ricleh]

**Edit...if I were a betting man, I'd say its probably a Flat. F42E and Phillips FP22E??

Your guesses are correct.

 

[cundifc]

I bought that set off the truck for like $375 last year if my memory is correct.

 

[Spudland_Dave]

Your guesses are correct.

Sweet Got the list! Thanks!

I bought that set off the truck for like $375 last year if my memory is correct.

While researching it here I saw that price +/- was a reoccurring sale item thru the years, at that price I'd probably buy the whole set as is, but I really don't "NEED" em, just want em. Currently have Armstrongs and Craftsman, just was gonna buy one or two Sockets every visit on the truck and eventually have the whole set to replace the ones I got.