Adding anti slip to existing floor.

[PoorOwner]

Is there a clear coat that can be applied to existing coated floors after sanding the surface via mechanical bond? I have a floor u coat it and want to add some anti slip grits.
Their repair kits are exactly that, scuff and apply more clear coat. I emailed them and didn't get a response.

 

[Armorpoxy]

You can use our Armorclad commercial topcoat with any of our different particle size non skid additives.


Sent from my iPhone using Tapatalk

 

[LegacyIndustrial]

We all have urethanes. Our Hd-Grip Soft-Skid is the ticket for a cleanable non-skid.


Sent from my iPhone using Tapatalk

 

[PoorOwner]

What kind of prep do I need? Do I need to broadcast the grits or is it already mixed in?

I want to minimize chance of slipping when shoes are wet.

 

[LegacyIndustrial]

What kind of prep do I need? Do I need to broadcast the grits or is it already mixed in?

I want to minimize chance of slipping when shoes are wet.

If using a urethane or other thin sealer we recommend 16 oz. (by volume) per 5 gals. Of our "fine" grade. This is a recommendation , you should do a test patch to be sure this works for you.


Sent from my iPhone using Tapatalk

 

[Shea]

Rough up the surface of the existing coating first with 100 grit sandpaper. Vacuum or sweep up and then wipe it down with some denatured alcohol and you are ready to go.