Ghostshield then Armorpoxy

[Laloguel]

Has anyone ever used the Ghostshield 4500 followed by the Armorclad? Has it held up?

I have a 1950s one car cinderblock/brick garage (used for storage and toys) and was thinking of putting the Ghostshield 4500to strengthen because of the age, diamond grinding, and then the Armorclad.

I have used Armorpoxy in the past a few times with success but never with Ghostshield or anything else before it.

 

[Garage Flooring]

Has anyone ever used the Ghostshield 4500 followed by the Armorclad? Has it held up?

I have a 1950s one car cinderblock/brick garage (used for storage and toys) and was thinking of putting the Ghostshield 4500to strengthen because of the age, diamond grinding, and then the Armorclad.

I have used Armorpoxy in the past a few times with success but never with Ghostshield or anything else before it.

First and foremost I would check with the manufacturer directly. Unless you have a specific issue you are trying to repair, I would highly recommend against using a densifier first. If you do have a specific issue, you are going to want to make sure that you minimize and adhesion issues. That starts with working together with a single supplier and insuring compatibility and appropriateness. Your best bet... PM Armorpoxy. Good people over there and they will walk you through.

 

[Armorpoxy]

Please don't do it, we do not recommend using a densifier below our epoxy. Its not necessary and could make adhesion an issue and void the warranty.

Armorclad 100% solids epoxy with primer is super strong and enhances the strength of the concrete.