To avoid these ads, REGISTER NOW!

Hauling Long Material

bimmer1980

Well-known member
Joined
Feb 5, 2009
Messages
2,103
Location
York, PA
I thought I would post how I hauled home a few long pieces of steel with my BMW and little trailer.

The pieces of steel are about 18' long. My trailer is only 8' long. The steel was free out of the company scrap bin, so I didn't want to spend a lot of money. So after work, I headed down there and drug a few pieces out. Then I cut a section of angle to go across the back of my trailer. I then rachet strapped it to the back of the trailer. Then I could lay the remaining pieces across the front and back and strap to the trailer.

I then ratchet strapped everything down nice and tight.

With the long overhang, I needed a red flag. So I cut out a piece of red printed vinyl and strapped to the end.

This rode about 15 miles thru city traffic and a small expressway with no problem. I was actually surprised and how well the whole thing handled down the road.
 

Attachments

  • 100_8813.jpg
    100_8813.jpg
    147.2 KB · Views: 143
  • 100_8814.jpg
    100_8814.jpg
    149.8 KB · Views: 96
  • 100_8815.jpg
    100_8815.jpg
    151.4 KB · Views: 94
  • 100_8816.jpg
    100_8816.jpg
    147.5 KB · Views: 71
To avoid these ads, REGISTER NOW!

Mike83

Well-known member
Joined
Jan 24, 2008
Messages
2,156
Location
Wisconsin
Ha ha my first thought is "these 18' long steel bars will fit perfectly in that small gap under all the other junk leaning against the garage wall."

Although you may have an intended purpose for getting the steel, I am a sucker for free stuff and would inevitably end up trying to get rid of it somehow since I could never use it anyway!
 
To avoid these ads, REGISTER NOW!

kbs2244

Well-known member
Joined
Nov 11, 2006
Messages
14,065
My uncle had a small utility trailer that he used once a year to take Boy Scouts to the Boundary Waters Canoe Area.

All the camping stuff went into the trailer and the canoes went onto a rack over the top of the trailer.
The problem was the length of the canoes.

He made a tongue extension about 8 feet long.
It had a hitch ball about 2 feet from the back end that fit into the regular hitch ball socket.
Two U-bolts went behind that, between the trailer body and the regular ball socket to attach it to the trailer.
What he ended up with the having the trailer with a extra 6 feet of tongue.

It worked great on trips from central Illinois.

BTW, If you check out the way the power companies get a pole to a site you will see a hitch strapped to the front end of the pole and a set of wheels with the pole strapped to them at the mid point.
They use the pole itself as the trailer/tongue.
 

kornjulio

Well-known member
Joined
Jun 25, 2006
Messages
787
I'm not impressed. You unnecessarily increased the risk of injury to your fellow motorists.
 

Gary S

Well-known member
Joined
Dec 27, 2008
Messages
2,972
Location
Bismarck, ND
I just tie long materials like that to the axles under my pickup. My pickup is a couple of inches under 20' long so I can easily haul 20-22' pieces with no problem.
 
To avoid these ads, REGISTER NOW!
Top Bottom