Icon Digital Torque Wrenches Made by Kabo?

[winlinmac]

As you all are probably aware, the 3/8" Drive Icon Digital Torque Wrench was finally made available for sale; appear very similar to the 1/2" Drive. Are all of the Icon Digital torque wrenches made by Kabo?

The 1/2" drive was too long for me, but the 3/8" drive might just be the sweet spot for me

 

[dnschmidt]

The Quinn are made by Eclatorq. The ICON are made by KABO. I found this out at SEMA two years ago as the ICON were identical to the KABO when I visited both booths. The only problem you might have is if you use the angle function as 3/8" wrenches will seldom achieve the +90 spec often used as you will go from 50 ft-lb to 150 ft-lb in a heartbeat when you add the additional +90.