Elkydude86
New member
- Joined
- Aug 6, 2024
- Messages
- 1
Hello all. I recently purchased an old Mac creeper seat with a tool tray combo. It has pretty sweet and in great shape. Only problem i didnt realize is that it is missing obe of the extension posts that would bring the tray component up to ebgine compartment height. The base is a tray with a post in the middle and one in the back. The seat drops onto the center post with a wingnut t tighten. There is a sqyare extebsion post about 2 ft tall also with awing nut for the rear post. Then there is a tool tray a littke smaller than the base r
Tray the can be adjusted in or out with its own post and nuts. At the other end of tha is an open square hoke to slide over the extebsion with a wingnut to lock in the height. I am looking fir a second extebsion post whuch wiukd have cone with it as far i ca tell. Anyone with ay info on themis tray/sea woukd be grea. Cannot fibd any number marjings. Only the original caytion sticker abd mac tools logo stucker. It heceb has the rubber strips around the edges to not scratch the car.
Tray the can be adjusted in or out with its own post and nuts. At the other end of tha is an open square hoke to slide over the extebsion with a wingnut to lock in the height. I am looking fir a second extebsion post whuch wiukd have cone with it as far i ca tell. Anyone with ay info on themis tray/sea woukd be grea. Cannot fibd any number marjings. Only the original caytion sticker abd mac tools logo stucker. It heceb has the rubber strips around the edges to not scratch the car.
