Miller Multimatic 220

[Retroman]

Found one for sale looks pretty new but needs a Power Module and boards.
Price for bare machine is $250.00 no mig or tig guns.
His repair quote was $2700.00 I found a control board with IGBT replacement for $1500.00
I don't see a Power Module listed would that be included with IGBT? I currently have a 211 but would really like the Tig capability.

I know that is one of the drawbacks of a multipurpose machine part goes out everything quits.
Just a home gamer so light use. Is this a repair I could preform myself is this even worth pursuing?
Looking at the serial number it is about 5 years old.

 

[Wamsutta]

Take your question over to the Miller forum. There's some guys over there that are technical experts.

https://forum.millerwelds.com/forum

 

[LXCam]

I bought a new one for the field a year back and I only paid around $2,200.00. I wouldn’t chance it, you’re not saving anything.

 

[finn]

I bought a new one for the field a year back and I only paid around $2,200.00. I wouldn’t chance it, you’re not saving anything.

Better recheck your price or model number. The Miller Multimatic 220 is an ac/dc capable machine and is being advertised at several online suppliers at around $4400.

the Multimatic 235 is dc only and runs a little north of $3000, based on a quick check.

 

[cvairwerks]

If you want TiG capability, you can get into a new Miller Diversion 180 for about the same money as trying to repair that machine.

Miller Diversion 180 TIG Welder 907627

Miller® Diversion™ 180 TIG Welder 907627The Miller® Diversion™ 180 is a 180 amp AC/DC TIG welder that is capable of TIG welding aluminum. The Diversion 180 comes complete with TIG torch and remote amperage foot control, along with flowgauge, gas hose and ground cable with clamp. It is a great...

store.cyberweld.com

 

[Wamsutta]

Better recheck your price or model number. The Miller Multimatic 220 is an ac/dc capable machine and is being advertised at several online suppliers at around $4400.

the Multimatic 235 is dc only and runs a little north of $3000, based on a quick check.

He said he bought one for the field so he probably bought a Multimatic 200.

 

[LXCam]

Better recheck your price or model number. The Miller Multimatic 220 is an ac/dc capable machine and is being advertised at several online suppliers at around $4400.

the Multimatic 235 is dc only and runs a little north of $3000, based on a quick check.

I swear it was a 211 he asked about. Must have baked the knoggin this past week more then I thinked i dood