Mounting a panel with interior siding

[Larry(OH)]

New to this page and what a bunch of neat pics, stories and good information. I am in the process of building a new shop. I want to put the "liner panels" inside which is what they call it around here.(usually a little thinner) Anyhow, I need some pictures of how you guys have mounted and run conduit/wire out of them into the shop. I know I am overthinking this and it shouldn't be that hard. I was wanting the cover out flush, but it seems I am going to need to mount it out so conduits can come out of it. Any help would be great

thanks

by the way, its 32x40 with a 12x40 lean to and 12ft celings. i will have water heat in the floor fueled by my Central Boiler

 

[jlckmj]

I would mount the panel normally then build a wood frame around the edge of the panel out of 1x4's or 2x4's to **** the liners up to. Plus, I would probably make the liner panel on top of the box removable with screws, that way you can take it off to add more circuits at a later date.
Jim