Overwhelmed!

[BamaMan]

Hey everybody, I'm new to the forum and have a question that I hope someone can answer. I've got a new 40x50 shop/garage and I'm about to put sealer on the floor. I've got to patch some indentations that leaves made when the concrete was finished. (Never finish concrete in the fall when you have trees all around. Lesson learned.) I'm using Legacy Industrial's concrete patch which is a 100% solids epoxy patch. The sealer I'm using is their HD6525-MMA. (acrylic, I think). My question(s) is will the sealer penetrate or adhere to the epoxy patch and is there a timeline I need to put the sealer on? Meaning, before the patch is completely cured or after it's completely cured. Thanks in
advance for your responses.

 

[NUTTSGT]

Legacy will chime in shortly.

If not send him a PM.


https://www.garagejournal.com/forum/member.php?u=55740

 

[LegacyIndustrial]

Hey everybody, I'm new to the forum and have a question that I hope someone can answer. I've got a new 40x50 shop/garage and I'm about to put sealer on the floor. I've got to patch some indentations that leaves made when the concrete was finished. (Never finish concrete in the fall when you have trees all around. Lesson learned.) I'm using Legacy Industrial's concrete patch which is a 100% solids epoxy patch. The sealer I'm using is their HD6525-MMA. (acrylic, I think). My question(s) is will the sealer penetrate or adhere to the epoxy patch and is there a timeline I need to put the sealer on? Meaning, before the patch is completely cured or after it's completely cured. Thanks in

advance for your responses.

It will adhere, sand the surface of the patch, knocking off any gloss.


Sent from my iPhone using Tapatalk

 

[larry_g]

I have a few leaf indentations in my concrete, they are features and good memories. Leave them.

lg
no neat sig line

 

[BamaMan]

It will adhere, sand the surface of the patch, knocking off any gloss.


Sent from my iPhone using Tapatalk

O.k., thanks for the response "Scotty". So I take it that no timetable, just make sure I lightly sand it to take gloss off before sealer. Got it. Good, because there are so many and some are deep(1/4 inch or so) it's gonna take a while to apply, cure, sand. I'll do the patching my off days this week and the sealer next week. Appreciate it.

 

[LegacyIndustrial]

Roll Tide!


Sent from my iPhone using Tapatalk