To avoid these ads, REGISTER NOW!

Polymer flooring estimate

racerboy

Well-known member
Joined
Nov 7, 2005
Messages
458
Location
New Jersey
I have two garages that share a wall, but are not connected. The larger one is 30x30 and was added shortly after the house was built. The one that was originally part of the house is a 2 1/2 car garage. Anyway, I wanted to do an epoxy floor on the bigger garage since that is where I do all of my work. I had a local guy that does industrial spaces come out and he gave me an estimate for both at $4 sg/ft. The total would be $6000. This would include diamond grinding both floor and installing a polymer floor. I’m not 100% sure I need an epoxy floor in the smaller garage since that is purely for storage, but I do like the aesthetics of having both floors match in the event I ever put a door between them. Does $4 sq/ft seem like a reasonable cost? I want to get this done sooner rather than later because I am going to order two additional lifts. I already have a Mohawk 2-post service lift in the bigger garage, and am going to add another 4-post lift in that space, as well as a single column lift in the other garage.

Thanks.


Sent from my iPhone using Tapatalk
 
To avoid these ads, REGISTER NOW!

Darryl2

Well-known member
Joined
Feb 6, 2007
Messages
111
Location
Missouri
$7 sq ft around here for the guys doing the good stuff (Polyaspartic) with full flake to rejection. Love mine!
 
OP
R

racerboy

Well-known member
Joined
Nov 7, 2005
Messages
458
Location
New Jersey
Thanks Darryl. I was leaning towards not using flakes and going with a light grey floor to get that ‘aircraft hangar’ look. Are there different grades of this polymer? Should I ask him what brand he is using?


Sent from my iPhone using Tapatalk
 
To avoid these ads, REGISTER NOW!
OP
R

racerboy

Well-known member
Joined
Nov 7, 2005
Messages
458
Location
New Jersey
On a related note, I was thinking of painting the walls in a two-tone look. If the floors are grey, any suggestions regarding colors? My Mohawk lift is the darker red color (not sure if that is relevant). I’m going to be adding a 4-post to one garage that has the Mohawk, and a single column to the other. Again, not sure these details matter.

The painter showed me a picture of a garage he did with the lower part in a darker blue and the top part in a lighter blue.


Sent from my iPhone using Tapatalk
 
OP
R

racerboy

Well-known member
Joined
Nov 7, 2005
Messages
458
Location
New Jersey
96e6f0a87fbca41ed851c3cde7cb24ec.jpg
Here’s an example of one if the garages he painted.


Sent from my iPhone using Tapatalk
 

Attachments

  • 96e6f0a87fbca41ed851c3cde7cb24ec.jpg
    96e6f0a87fbca41ed851c3cde7cb24ec.jpg
    60.3 KB · Views: 0
To avoid these ads, REGISTER NOW!
Top Bottom