RaceDeck tiles when using a Snowmobile Lift

[joel]

Is anyone using the typical parallelogram snowmobile lift that rolls on 4 small diameter wheels with RaceDeck flooring?

I am concerned about how easily the lift will be to move with a sled on it and if damage to the tiles would be a problem.

 

[RaceDeck1]

I am not sure what exactly your lift looks like, but I have two snowmobiles that I move around on a cradle type device that has small casters and it works great

 

[joel]

Thank you for your reply Jorgen. What is the diameter and width of the wheels on the casters?

I'll try to post a picture of the snowmobile lifts I have.

 

[RaceDeck1]

They are 1" casters up front and a larger single 3" on the rear

 

[joel]

Pics of snowmobile lift. (It is pictured with a scrap piece of plywood doing double duty as a roll around work surface!)

The fixed wheels are 3.5" diameter and 1" wide. The caster wheels are 2.5" diameter and 1-1/4 wide. The lift needs to be rolled around when a snowmobile (easily 500-600 pounds) is on the lift. Any guess on how easily/difficult this would be on RaceDeck Diamond or FreeFlow? (It is very easy on the bare concrete.) Any concern with damage to the tiles?

 

[RaceDeck1]

Pics of snowmobile lift. (It is pictured with a scrap piece of plywood doing double duty as a roll around work surface!)

The fixed wheels are 3.5" diameter and 1" wide. The caster wheels are 2.5" diameter and 1-1/4 wide. The lift needs to be rolled around when a snowmobile (easily 500-600 pounds) is on the lift. Any guess on how easily/difficult this would be on RaceDeck Diamond or FreeFlow? (It is very easy on the bare concrete.) Any concern with damage to the tiles?

you should have no issue with a snowmobile on those casters

 

[joel]

Thank you for the reply Jorgen.