To avoid these ads, REGISTER NOW!

Shop Safety Tips...

akdiesel

Well-known member
Joined
Aug 8, 2008
Messages
2,617
Location
Wasilla, AK
Seen some issues on other topics about safety concerns and at work we strive to have a safe competent work site, so I thought I would start this topic to give some safety tips to those that may not be aware of the problems.
One lesson learned may help out another from injury or distruction.

1- Safety glasses staged at the drill press.

2- No loose clothing around spinning machinery.

3- Store flamables away from water heaters, furness, sparks...

Any other ideas?
 
To avoid these ads, REGISTER NOW!

nissan_crawler

Well-known member
Joined
Jan 12, 2008
Messages
9,638
Location
Wichita, KS
4- stand to the side of grinding/cutoff wheels that are spinning up

5- ring test the wheels every time

6- have plenty of fire extinguishers on hand

7- have a respirator for use with chemicals, etc. I was using mine tonight cutting treated wood in the garage.

8- comfortable full face shield, I never wore them because I had the cheap ones. I got a good one, and wear it ALL the time grinding/sanding/wire brushing. I even use it with the table saw/circular saw/miter saw to keep the dust off my face. I was using this for the treated wood, too.

9- some form of gloves for working with chemicals and solvents.

10- ear plugs. I wear them when using the grinder, saws, lawn mower, weed eater...

Is it overly **** to have a respirator, full face shield and ear plugs while cutting wood? Maybe, but it's not going to hurt.
 

nissan_crawler

Well-known member
Joined
Jan 12, 2008
Messages
9,638
Location
Wichita, KS
attachment.php


A recovery worthy of many thanks
By Cory Frolik The Daily Times
Farmington Daily Times
Article Launched:11/26/2006 12:00:00 AM MST
FARMINGTON — For Jim Wilson, Thanksgiving Day was not spent at a dinner table surrounded by family. Instead, the 53-year-old Farmington man was lying on a hospital bed at San Juan Regional Medical Center with feeding tubes protruding from his stomach.


20061125__newsA1cutthroat1126.jpg


Wilson was nearly killed in a freak accident on Nov. 15, when a piece of a cutting disk sliced through his throat and became lodged in his neck bone. The accident occurred at Gene's Frame & Alignment Inc., a business that works on the frames and alignment of big trucks.

Family members say that Wilson was cutting a bolt with a grinding wheel when the cutting disk broke in half. The break caused a large 3-inch chunk to shoot up and slice through his neck. His son, Jeremy Wilson, 23, said his father has been hurt on the job before — a busted finger nail or minor gash — but an injury of this magnitude is rare.

"His windpipe got cut in half," he said.

Jeremy said the chunk that came off the grinding wheel went almost completely through his neck. Fortunately, Wilson's quick thinking may have saved his own life.

As soon as the injury occurred, other workers at the job came to his assistance. They helped apply pressure to the wound and called 911. But Jeremy says his father performed a nearly miraculous feat. He says his father reached inside his own throat and held together his windpipe. Later, Wilson would explain his actions by saying that he knew he needed to breathe.

Some minutes after the accident, the ambulance showed up and inserted a tracheal tube. But Jeremy says had his father not held together his windpipe, he would not have made it to the hospital. Wilson would not have been able to breathe and would have suffocated to death.

"(Doctors) said they have never seen anyone even make it to the ER when injured that bad," Jeremy said. "Usually, people become brain dead in seven minutes from receiving no oxygen to the brain."

Medical personnel familiar with the incident were unable to comment on the matter because of confidentiality laws. They could not confirm the family's version of events.

Wilson was taken to San Juan Regional Medical Center where medical staff were still pessimistic about his recovery. Jeremy said they gave him an 8 percent chance of surviving.

Surgeons had to sew his windpipe back together and, at one point, seal it with medical foam. They inserted a tube into his stomach in order to feed him. They also had to treat the damage done to his vocal cords and esophagus.

Wilson might not be able to speak again. Jeremy says he will likely need a permanent tracheal tube and will have to be fed through a feeder tube that was inserted through his stomach wall.

His family says that it may be a year, if ever, before he can eat or speak on his own.

Jeremy's wife, Tara, has visited her father-in-law many times since his accident. She says his recovery is nearly as miraculous as the life-saving technique he performed to save himself.

"He's gotten a lot, lot better every single day," she said Friday. "They told him he'd spend six weeks in hospital. They are talking about discharging him today (Friday)."

Wilson's family bought him a dry erase board. Unable to speak, he is forced to write down his thoughts and feelings in erasable marker. Wilson, who was sedated for the first few days after surgery, fell into a brief, but deep, depression. His will to live eroded.

More than a week later, however, his spirits are lifting. He has expressed appreciation for his family and his fortune in being alive.

On Thanksgiving Day, while families throughout Farmington enjoyed their turkey and stuffing, Wilson and Jeremy sat together in the hospital. They watched their favorite team, the Dallas Cowboys, beat Tampa Bay.

It will still be a long time before Wilson's life returns to some level of normalcy. A medical station will be set up in his home so nurses can systematically check on his wound. The wound has made Wilson susceptible to infection and pneumonia. But through it all, his family says they are simply thankful that Wilson was alive on Thanksgiving.

"I thank God that he's here," Jeremy said.

On Friday afternoon, Wilson was released from the hospital and was helped back into his home.

His wife, Brenda, said it is sad that her husband was not able to eat his favorite food — turkey. She added, however, that it's good to have her husband home.

Cory Frolik: [email protected]

http://daily-times.com/ci_4723645


Just some friendly persuasion.

Oh, and:

11- leave the damn wedding ring and jewelry out of the f'ing shop. If the old lady whines, ask her how she would like you without a hand.

Degloved_finger_from_ring_1.jpg


I also wear short sleeves in the shop, less chance of snagging anything.
 

Diesel-Mech

Well-known member
Joined
Jul 20, 2008
Messages
1,939
Location
Kansas
11. Always use jack stands.

12. Ratchet strap or safety chain transmissions to the jack.

13. Keep a fire extinguisher at hand when using a torch.
 

Vinko

Well-known member
Joined
Jul 7, 2008
Messages
5,829
Location
Los Angeles
I agree with the face shield when grinding. Or at least full goggles. But better face shield.

I like to keep an extra few of them in clear plastic bags, so they don't get grinding dust on them. Then I blow off all the dust and use a good marine plexiglass cleaner and clean them all up. Got about 3 or 4 in a rotation.

Also steel-tip boots.

And I'm all for a respirator when needed.

My dad won't wear gloves when using a drill press or milling machine.
 

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
I saw a MUCH worse finger injury on a rock climbing site - all the way down to the all-white bone. I never wear my ring when lifting heavy objects or working with heavy machinery.

Respirators are very handy, and there's no such thing as being too safe.

Another tip - if the chemical says "USE IN VENTILLATED AREA" heed the warnings. Some chemicals (such as paint stripper) have chemicals for which there is no recommended minimum exposure limit - ANY exposure is to be avoided.

Always cut AWAY from your body. When using picks and probes, use a vise to hold the bulk of the part in question - ripping out a chunk of skin with a probe isn't pretty.

Just because you're safe, doesn't mean everyone is safe - be very mindful of who's around you while you work.

When using halogen lights, ensure that the lamps are well ventillated and away from anything flammable.

Like Vinko already recommended, try to avoid wearing gloves near heavy machinery. If necessary, wear as close-fitting gloves as possible, such as disposable gloves that can easily break away.
 

Brad54

Well-known member
Joined
Jun 13, 2006
Messages
4,646
Clearly label where your shop's fire extinguishers are. Just because YOU know where they are, doesn't mean your buddy will.

If you're working under a car, put a wheel under the frame rail. That way if the worst happens, the car isn't fully resting on you. I did this with the spare tire from my 54 Buick, in a parking lot to fix the electric fuel pump. The car was on its tires, but I needed a couple extra inches to get my chest under the frame rail, so I used a small portable floor jack. It bled down 6 inches over 10 minutes...You don't notice that slow decent. The frame came to rest on the tire, it broke the bead and air started leaking out, and I got the hell out of dodge! Had that tire not been there, I'd have been trapped, with the weight of the car on my chest...but juuuuust barely, because the car was still on its tires. It was Friday night after work, and they wouldn't have found my body until Monday morning, because I pulled into a parking lot and parked behind a row of Leland Cypress trees for the shade--totally hidden from view of the road.

I know a shop that pulled a guy out from under an El Camino about a year later when it fell off the jackstands while he was putting headers on it. He did everything the right way, and still ended up with a big block Chevy and the rest of the car on his rib cage. He lived, but it was touch-and-go for a long time, and he had a lot of internal damage from busted ribs harpooning things.

As a little extra incentive, every time I get under a vehicle, I look and think about what would have to happen for my wife and son to "find" me under it. Then I correct it. That's morbid, but it's great incentive to take your time and not put yourself in dangerous situations.

-Brad
 

Lyaec350

Well-known member
Joined
Nov 17, 2007
Messages
583
Location
somewhere...
I wear safety glasses whenever I am in the shop, no matter what I am doing. You just get in the habit and then when something weird happens like a spring flies out of that little thing you're changing the batteries in and hits your glasses you are very thankful.

I am usually reluctant to wear a respirator because it always seems to fog up my glasses/goggles... does anyone have a suggestion for eliminating this? It happens with any mask/resp. even if I tighten the little metal band as tight as it will go over my nose. I have tried anti fog cloth for ski goggles but it doesnt seem to work that well.
 

Wrench-Bender

Active member
Joined
Oct 8, 2008
Messages
29
Location
Upstate of South Carolina
This may not be a popular thing to say around a bunch of "real men". With that being said there is no place for any kind of booze in my garage while any type of work is being performed! I also don't allow any type of horse play! Lifes to short for needless mistakes, now before ya'll lable me a fuddy duddy,do gooder,no fun $#!+ #&@*. I do enjoy a good laugh,practical jokes and a drink every now and then just not while working.
 

mattbal

Well-known member
Joined
Aug 5, 2007
Messages
56
Location
Connecticut
I built a “safety” board with all my safety stuff mounted on it. Its centrally located and painted red for high visibility


It has the following

Safety goggles
Face shield
Ear plugs
Ear muffs
Fire extinguishers (one Halon and 1 dry chemical.)
Latex gloves
Mechanics gloves
Heave duty rubber gloves
Leather work gloves
"Hot" gloves/mits
Kevlar sheets (flame/heat retardant)
Respirators, disposable and filer style
Gel coated burn blanket
Ring cutter tool(but my ring comes off before entering the garage)
Flashlights
First aid kit
I make sure that I have enough of the important stuff for the rare moments that I actually have helpers in the garage

I recently saw a friend who keeps a small spray bottle of water in the shop for dealing with small fires before they become big ones. Keeps from having to crack open a fire extinguisher for minor problems


Matt
 

terry1769

Well-known member
Joined
Jun 28, 2005
Messages
97
Location
Atlanta
Matt, I'd love to see a pic of your safety board. I've been pondering something similar.

I also keep a squirt bottle with the torch. It tames small flareups without having to drag out the big extinguisher.
 

Brad54

Well-known member
Joined
Jun 13, 2006
Messages
4,646
I built a “safety” board with all my safety stuff mounted on it. Its centrally located and painted red for high visibility


It has the following

Safety goggles
Face shield
Ear plugs
Ear muffs
Fire extinguishers (one Halon and 1 dry chemical.)
Latex gloves
Mechanics gloves
Heave duty rubber gloves
Leather work gloves
"Hot" gloves/mits
Kevlar sheets (flame/heat retardant)
Respirators, disposable and filer style
Gel coated burn blanket
Ring cutter tool(but my ring comes off before entering the garage)
Flashlights
First aid kit
I make sure that I have enough of the important stuff for the rare moments that I actually have helpers in the garage

I recently saw a friend who keeps a small spray bottle of water in the shop for dealing with small fires before they become big ones. Keeps from having to crack open a fire extinguisher for minor problems


Matt

That's a fantastic idea! I'd really like to see a pic of your board--how you mounted the different things (like gloves that don't come in a box, the blanket, etc). I really, really like the idea, and have a good spot in my shop for something similar. I'd never thought of it before though.

I have a friend who mounted a fire extinguisher ON his Miller welder. Makes sense, since a welder is a good cause of fires.

-Brad
 

mcdtommy23

Well-known member
Joined
Aug 27, 2008
Messages
580
Location
Detroit Michigan
A battery back-up emergency light is a must have! If you're in a bad spot and the power goes out, it can help you to navigate your way to safety. (Mine has saved my **** on more than one occassion).

A CLEAR path to the exit door, and unlock the overhead door. In the event someone needs to get in to help, it pays to have the doors unlocked.
 

Vinko

Well-known member
Joined
Jul 7, 2008
Messages
5,829
Location
Los Angeles
I wear safety glasses whenever I am in the shop, no matter what I am doing. You just get in the habit and then when something weird happens like a spring flies out of that little thing you're changing the batteries in and hits your glasses you are very thankful.

I am usually reluctant to wear a respirator because it always seems to fog up my glasses/goggles... does anyone have a suggestion for eliminating this? It happens with any mask/resp. even if I tighten the little metal band as tight as it will go over my nose. I have tried anti fog cloth for ski goggles but it doesnt seem to work that well.


This is a big problem for a lot of guys I know.

Only two suggestions I can think of are: sweat band or handkerchief for the hair (because sweat might be a contributing factor to fogging), and get the mask professionally fitted. But that's expensive and maybe over kill for some guys. They have this thing like an old diver's suit and they test the fitting on the mask by pumping in different smells, to see the best fitting mask available. I think there's a labor/safety law in California about having a well-fit mask.

I know quite a few guys who've had sweat drip into their eyes and then they touch their face or wipe their brow and get a metal particle in their eye.

Also, guys who use safety glasses instead of tight-fitting googles or face shield have had metal borings or shards or dust fly off at weird angles and get into their eyes.
 

MXtras

Well-known member
Joined
Aug 17, 2005
Messages
1,356
Location
On the Right Coast
I wear safety glasses whenever I am in the shop, no matter what I am doing.

I am usually reluctant to wear a respirator because it always seems to fog up my glasses/goggles... does anyone have a suggestion for eliminating this?

Go to your local motorcycle shop - they sell anti-fog wipes and solutions for goggles and visors. It works. Actually, so does licking the lens and then wiping it clean, but the anti-fog products work better.

Good thread, guys. Keep it going.

My tip for shop safety - always stick around the shop for at least 30 minutes after grinding or welding. A hot spark can easily find it's way into a cardboard box or the corner of a wall and smolder for a while before igniting. Keep a large "combustible-free" zone around your Hot Work - 20-30 feet is safe.

Scott
 

ddawg16

Well-known member
Joined
Jul 11, 2008
Messages
21,005
Location
S. California
This may not be a popular thing to say around a bunch of "real men". With that being said there is no place for any kind of booze in my garage while any type of work is being performed!

It takes real man to say that......ditto here. I like my beer....in fact, I plan on having a small fridge for beer, diet pepsi and apple juice (for the kids). BUT, not alcohol until all the cutting is done. Table saws and beer do not mix....that blade knows no difference between wood and my finger.....so, when I'm doing wood working....I do all my cutting early on...then once I'm into the sanding and glueing, then I allow myself a cold one or two...or three....

A suggestion on the emergency light....go get a small UPS...APC has one for about $60 that will power a flurescent light for a least a couple of hours. I have one on the computer and cable box (Vonage). If we have a power outage, computer goes off and I can use it to run the light.

Disconnect switch - Connect all the big power equipment to a disconnect switch....when you walk away from the equipment, flip the switch.....I can't tell you the scare I got when one night my oldest boy (2 at the time) turned on the table saw....luckely, nothing was on the table.

Bottom line....if you think it can happen,.....it most likely will.

Glad everyone is having this discussion.....like real men should.
 
OP
A

akdiesel

Well-known member
Joined
Aug 8, 2008
Messages
2,617
Location
Wasilla, AK
These are all great tips. Keep them comming.
Mods can we make this a sticky for the top of the page of the General Section?
 

Torque1st

MEMBER EMERITUS
Joined
Sep 14, 2008
Messages
5,668
Location
KC Metro, Kansas
This is really a great thread. It has made me think of a number of near misses in my shop.

I don't see anything yet re proper storage for dirty shop rags. There are red painted metal containers for that.
Catalog
They make Polyethylene storage containers also but I just feel better with the metal ones.

Also a flammable cabinet will slow a fire down:
Catalog
They are expensive but they can be found at freight salvage places. I found a 30 gallon unit for $100 with only a small scratch.

The idea of having a spray bottle for small fires is great. Having a hose ready whenever you weld or use a torch is a good idea also just keep the water dripping and puddle away from you. A hose charged and coiled in a slop sink or container works. Extinguishers are expensive and the dry chemical ones make a mess almost as bad as a fire.

I am a little **** about fire because I have seen a few. None of my making tho... <knock on wood> You would not believe how fast they can spread or go from a little smoke to a roaring fire. Just watch your exit point when battling a fire. When they flare up it is easy to get trapped. A person also needs some training on just HOW to use a fire extinguisher. Your company or the local fire department may have training sessions. The fire dept training is usually more fun...:thumbup:
 

Dave88LX

Well-known member
Joined
Nov 25, 2006
Messages
664
Location
York, PA
That safety board is not a bad idea. I need to add some fire extinguishers, I just need to find a good source for them. What type do I need and what size? In a 48x28 area, how many should I have?
 

Vinko

Well-known member
Joined
Jul 7, 2008
Messages
5,829
Location
Los Angeles
Disconnect switch - Connect all the big power equipment to a disconnect switch....when you walk away from the equipment, flip the switch.....I can't tell you the scare I got when one night my oldest boy (2 at the time) turned on the table saw....luckely, nothing was on the table.

That's a great idea for a home shop. Esp. with children around. The can and do get into much stuff
 
To avoid these ads, REGISTER NOW!

nissan_crawler

Well-known member
Joined
Jan 12, 2008
Messages
9,638
Location
Wichita, KS
Who makes the "comfortable" full face shield? I too have a couple of the cheapies, but haven't seen one yet that looks more comfortable.

Uvex Bionic. You can get a tinted one for use with a plasma, too. They rock. I like the drop down part that protects the neck, too.

post-uvexbionic.jpg
 

CraigFL

Well-known member
Joined
Nov 1, 2005
Messages
704
Location
Panama City, FL
Another tip...

Take the time to fix your work in a drill press vise and fix the vise to the table. Only a few extra minutes but if you've ever had something catch and spin!!!
 

Palmetto

Well-known member
Joined
Jun 5, 2008
Messages
106
Location
South East Texas
Those face shields are even good when running a weedeater. I dont like wearing them, but when you get a stick to the mouth it will make you appreciate it!

When I am welding I wear a Carhartt shirt, untucked to let the slag roll off me. Be careful not to wear shirts that are starting to fray on the seams. (they are more comfortable & soft by that time though!) The frays will catch fire easily!

Inspect your ginding discs before using them. If they are cracked, or have a piece broken off, then throw it away, and geta new one out. So far, I have not had one come apart on me, but it is always in the back of my mind. My brother used to be a pipeline welder, and he has told me some stories. So I am always mindfull of that.

Always wear leather gloves when working with tin. It will cut you so quick!

Rushing, Frustration, & Fatigue are the top reasons I hurt myelf. So take your time, and identify your hazards, and work around/with them.

Remember, it just takes one secong to get hurt. My grandfather was grinding rivets off a building to remove the tin. They where going to re-use the tin around the ranch. (trying to po-boy it). Sweat was rolling into his eyes and foggin up his safety goggels. He removed them, and the next rivet when straight into his left eye. He didnt loose they eye, but lost most of his vision from it. Over 100k in hospital bills 20 years ago. My dad says they could have built a heck of a shop over that eye!

Be safe guys! Your family needs you!
 

Palmetto

Well-known member
Joined
Jun 5, 2008
Messages
106
Location
South East Texas
Another tip...

Take the time to fix your work in a drill press vise and fix the vise to the table. Only a few extra minutes but if you've ever had something catch and spin!!!

True! And be carefull what side of your work that you are standing on! If your work catches, you want it to hit the back of the drill press, not you. This is one of the first things my grandfather taught me when I was learning to use the drill press at a young age.

Good one.
 

NSXSOON

Well-known member
Joined
Nov 15, 2005
Messages
221
Location
Florida Space Coast
A picture of the Safety Board would be a great way to get some ideas on how to lay out one for my space. I have 99% of the items, many multiples of some but not in a centralized location for quick and easy access.
 

Uncle Buck

Banned
Joined
Mar 7, 2005
Messages
9,120
Location
Kansas
Stop using grinding wheels on your rt angle grinders and switch to flap wheels, the flaps do a great job of removing material without the risks related to stone wheels.

Another note, the official position in the OSHA Machine Guarding training classes as pertains to rt angle grinding wheels is as follows. If you are using a flap wheel instead of a stone wheel you can use the grinder without the use of a wheel guard. Keep in mind not all OSHA compliance officers may be aware of this so some might still mistakenly write a citation on the absence of the guard. The logic behind this is a flap wheel will not explode like a stone wheel.

(While this is the official word I got recently during a machine guarding class I am sure plenty of compliance officers are not aware of the position and would be happy to write it anyway, and the citation would hold up for any employer that pays the fines without challenging them!)
 

Palmetto

Well-known member
Joined
Jun 5, 2008
Messages
106
Location
South East Texas
Im not a pipe fitter by trade, but my whole shope is framed out of pipe. You have to use a grinding wheel to clean fit-ups, and bevel edges. The main thing is using good, quality wheels, and discarding them when the time is right. I have used cheap grinding wheels before, and they come apart pretty easy. I think that is the main problem.

later later....
 

warrent

Well-known member
Joined
Jan 15, 2008
Messages
50
Location
Trenton, MI
On the fire extinguishers the best place to mount them is by the exit doors. Remember the first thing to do when there is a fire is run for the door. So by putting the extinguisher there you will always know the location.

Just a simple safety tip is to remove the drill bit from an electric drill after use. A while back I was winding the cord around the drill (I think most of us do that) and I had a 3/8 drill bit still in the drill. Well the drill bit’s tip caught my left forearm and I got a very big gash. No stitches but sure did bleed.
(yeah I know you have a battery on yours)
 

jay50

Banned
Joined
Oct 28, 2007
Messages
3,894
1. Always lock up the beer fridge to keep the neighborhood kids out of your brews
2. Keep a handgun readily available for low lifes....
 

Ggg

Well-known member
Joined
Mar 17, 2008
Messages
230
Location
N.W. IL.
Don't wear any type of open toed shoes anywhere in the shop.
Don't use cinder blocks as jack stands.
Have a well stocked first aid kit and know how to use it.
Don't skimp on firewalls and fire rated doors on attached garages. If there is one place to go above and beyond this is it. It ***** to have a shop fire, but at least you will still have a home to live in.
Fasten self standing shelves/pallet racks to the walls so they can't tip over.
Install a Co detector in the shop. Also do not warm up your car in an attached garage, the Co will get into the house, even if the bay door is open.
 

Craig Balzer

Well-known member
Joined
Sep 21, 2005
Messages
855
Location
Colorado Springs
ALL

I take no credit for what I am about to post: PURE PLAGARIZISM.

All I did was copy/paste ALL OF YOUR the ideas into a WORD document and then group "like" ideas or comments:

SHOP SAFETY

1- There is no place for any kind of booze in my garage while any type of work is being performed!
2- Safety glasses staged at the drill press.
3- Comfortable full face shield. Get a good one, and wear it ALL the time grinding/sanding/wire brushing.
4- Stand to the side of grinding/cutoff wheels that are spinning up
5- Ring test the wheels every time
6- No loose clothing around spinning machinery.
7- Take the time to fix your work in a drill press vise and fix the vise to the table. Only a few extra minutes but if you've ever had something catch and spin.
8- No wedding rings or jewelry in your shop/garage
9- Avoid wearing gloves near heavy machinery. If necessary, wear as close-fitting gloves as possible, such as disposable gloves that can easily break away.
10- Always wear leather gloves when working with tin. It will cut you so quick!
11- Some form of gloves for working with chemicals and solvents.
12- Ear plugs; wear them when using the grinder, saws, lawn mower, weed eater...
13- Have plenty of fire extinguishers on hand
14- Keep a fire extinguisher at hand when using a torch/welder.
15- Keep a small spray bottle of water in the shop for dealing with small fires before they become big ones. Keeps from having to crack open a fire extinguisher for minor problems
16- Stick around the shop for at least 30 minutes after grinding or welding. A hot spark can easily find it's way into a cardboard box or the corner of a wall and smolder for a while before igniting.
17- Store flammables away from water heaters, furnace, sparks...
18- Proper storage for dirty shop rags
19- Don't skimp on firewalls and fire rated doors on attached garages.
20- Have a respirator for use with chemicals, etc.
21- If the chemical says "USE IN VENTILATED AREA" heed the warnings. Some chemicals (such as paint stripper) have chemicals for which there is no recommended minimum exposure limit - ANY exposure is to be avoided.
22- When using halogen lights, ensure that the lamps are well ventilated and away from anything flammable.
23- Always use jack stands.
24- Never use cinder blocks as jack stands.
25- Ratchet strap or safety chain transmissions to the jack.
26- Always cut AWAY from your body. When using picks and probes, use a vise to hold the bulk of the part in question.
27- A battery back-up emergency light is a must have! If you're in a bad spot and the power goes out, it can help you to navigate your way to safety. (Mine has saved my **** on more than one occasion).
28- A CLEAR path to the exit door, and unlock the overhead door. In the event someone needs to get in to help, it pays to have the doors unlocked.
29- Disconnect switch - Connect all the big power equipment to a disconnect switch....when you walk away from the equipment, flip the switch
30- No open toed shoes anywhere in the shop.
31- Fasten self standing shelves/pallet racks to the walls so they can't tip over.
32- Install a CO detector in the shop.
33- Do not warm up your car in an attached garage, the CO will get into the house, even if the bay door is open.
34- Just because you're safe, doesn't mean everyone is safe - be mindful of others around you while you work.
35- Rushing, Frustration, & Fatigue are the top reasons I hurt myself. So take your time, and identify your hazards, and work around/with them.
36- Have a well stocked first aid kit and know how to use it. Build a “Safety Board" with all my safety stuff mounted on it. Its centrally located and painted red for high visibility:
• Safety goggles
• Face shield
• Ear plugs
• Ear muffs
• Fire extinguishers (one Halon and 1 dry chemical.)
• Latex gloves
• Mechanics gloves
• Heave duty ubber gloves
• Leather work gloves
• "Hot" gloves/mits
• Kevlar sheets (flame/heat retardant)
• Respirators, disposable and filer style
• Gel coated burn blanket
• Ring cutter tool(but my ring comes off before entering the garage)
• Flashlights
• First aid kit
 

bmwpower

Super Moderator
Staff member
Joined
Apr 24, 2005
Messages
12,578
Location
NJ
Anyone have any hydraulic press safety tips?

Any what is the deal with not wearing a wedding ring?
 
Last edited:

bmwpower

Super Moderator
Staff member
Joined
Apr 24, 2005
Messages
12,578
Location
NJ
Uvex Bionic. You can get a tinted one for use with a plasma, too. They rock. I like the drop down part that protects the neck, too.

post-uvexbionic.jpg

That shield looks nice.

What is the proper type of shield to use with a grinding/cutoff wheel? Is plastic going to protect you?
 

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
Anyone have any hydraulic press safety tips?

Any what is the deal with not wearing a wedding ring?

BMW look on the first page of this thread and there is a pretty grafic picture of why not to wear a ring in the shop . I wear 2 rings most of the time but if I am working they go in my pocket till I am done.


Rick
 

bmwpower

Super Moderator
Staff member
Joined
Apr 24, 2005
Messages
12,578
Location
NJ
BMW look on the first page of this thread and there is a pretty grafic picture of why not to wear a ring in the shop . I wear 2 rings most of the time but if I am working they go in my pocket till I am done.


Rick

Yea, I saw that, but I don't understand how it happened. Maybe some people wear large rings or something. I always wear my ring (might not have a choice if I don't lose some weight soon) and never had a problem.
 
To avoid these ads, REGISTER NOW!
Top Bottom