To avoid these ads, REGISTER NOW!

Socket Organizers

fastbike02

Well-known member
Joined
Nov 30, 2015
Messages
501
Location
Walnut Grove MS
Does anyone happen to know what sizes the HF socket tray goes through vs the craftsman set and if they skip any? I really like the HF but I have the 299pc craftsman set and would like something that would hold most of them!
 
To avoid these ads, REGISTER NOW!

Greg85mcss

Well-known member
Joined
Jul 9, 2015
Messages
760
Location
Frederick MD
I have a big craftsman socket set & hf trays. 2 sizes I remember not having a place are short 21mm 3/8 & 9mm 1/2. I don't need the 9 for anything & put the 21 on the 20 post because I've never used a 20. I've been looking at other socket storage recently & if you like having them organized with the size displayed... most hold the same sizes except westling & that's $100 plus a couple bucks per tray for size engraving & shipping for a set. You'll probably need 2 with sae & metric. I'd give a hf set a try. You can always use them for less used sockets


Sent from my iPhone using Tapatalk
 
To avoid these ads, REGISTER NOW!

lightning02

Well-known member
Joined
Jul 29, 2013
Messages
2,677
I have a big craftsman socket set & hf trays. 2 sizes I remember not having a place are short 21mm 3/8 & 9mm 1/2. I don't need the 9 for anything & put the 21 on the 20 post because I've never used a 20. I've been looking at other socket storage recently & if you like having them organized with the size displayed... most hold the same sizes except westling & that's $100 plus a couple bucks per tray for size engraving & shipping for a set. You'll probably need 2 with sae & metric. I'd give a hf set a try. You can always use them for less used sockets


Sent from my iPhone using Tapatalk

I think 26mm is also missing on the 1/2 in drive tray if I recall.
 
To avoid these ads, REGISTER NOW!
Top Bottom