Vintage WW2 GMTK Completion

[Private Lugnutz]

I’m trying to complete a WW2-era General Mechanics Toolkit.

These are the last remaining tools I need.

If you have any you’d like to sell, I pay generously.

Please PM me with photos.

16” Lady’s Foot Pry Bar and 10” Oval Sash Brush No. 5 (often called a parts or tool cleaning brush, sometimes a toolbox brush)

Punches and Chisels (for machinists or mechanics)

1/2-Drive Drag Link Sockets

Snap-On 1/2-Drive Handles and Bars

THANKS

 

[Private Lugnutz]

QUICK CORRECTION:

I also need the three (3) smallest 1/2-drive sockets. I meant to circle those with the drag link bits, but forgot to. I have a near-complete set of Snap-On SW-Type sockets, all date coded E or G, so I am looking for the following to complete it:

- Snap-On SW-140 7/16" (2, 3, E or G code, or no code)
- Snap-On SW-160 1/2" (2, 3, E, or G code, or no code)
- Snap-On SW-180 9/16" (2, 3, E, or G code, or no code)

These should have a plain steel finish, no plating.

THANKS!

 

[Private Lugnutz]

UPDATED ON 3/6/2015

STILL NEED THE FOLLOWING
Standard Drive-Pin Punch, 4” Long, 3/8” point
Cape Chisel, 7” Long, 1/4” cut
Diamond-Point Chisel, 6” Long, 3/8” cut
10” Oval Sash #5 Brush
Snap-On A-15 1/2"-sq drive Drag Link Socket 1-3/16” (2, 3, E, or G code, or no code)

ALSO NEED THESE (NEW TO THE LIST):
Snap-On TM-410 E (1/4"-drive 5/16" 8-point socket)
Snap-On TM-412 E (1/4"-drive 3/8" 8-point socket)
Duro-Chrome Duro-Lite No. 182 ignition screwdriver
40's-50's vintage Hacksaw Blades, Hard, 12" x 24 Teeth Per Inch (Simonds, Disston, Atkins, etc)

 

[Private Lugnutz]

Update

 

[Private Lugnutz]

Updated

 

[Private Lugnutz]

!!!!GETTING VERY CLOSE TO COMPLETION - ONLY NEED THE FOLLOWING ITEMS!!!!

Reminder: all 1940's vintage

- Cape Chisel, 7” Long, 1/4” cut
- Diamond-Point Chisel, 6” Long, 3/8” cut
- Snap-On A-15 1/2"-sq drive Drag Link Socket 1-3/16” (2, 3, E, or G code, or no code)
- Hacksaw Blades, Hard, 12" x 1/2" x 24 Teeth Per Inch (Simonds, Disston, Atkins, etc)

 

[Private Lugnutz]

!!!!DOWN TO THREE ITEMS!!!!

Reminder: all 1940's vintage, no chrome plating

- Any brand Cape Chisel, 7” Long, 1/4” cut
- Any brand Diamond-Point Chisel, 6” Long, 3/8” cut
- Snap-On A-15 1/2"-sq drive Drag Link Socket 1-3/16” (2, 3, E, or G code, or no code)

 

[Private Lugnutz]

!!!!DOWN TO ONE ITEM!!!!

Snap-On A-15 1/2"-sq drive Drag Link Socket, 1-3/16”, with no chrome plating, a straight up and down logo (not slanted), "A-15", and a "2", "3", "E", or "G" code, or no code at all.