bubinga
Well-known member
LOL sold already!
Found a deal on craigslist? - List Here!
- Thread starter markf4e
- Start date
bubinga
Well-known member
ETA Don't mind me, l get all mixed up.
Ole Slewfoot
Well-known member
If you need a rough terrain excavator...
menzi Muck. 12k
tool_scrounge
Well-known member
$200 2x72 inch belt grinder
Orange County, California
Orange County, California
2x72” Belt Grinder - tools - by owner - sale
2x72” belt grinder, heavy duty, adjustable speed. Motor works well, but on/off switch doesn’t work. I just plug it in and out without issue. Perfect for beginner knife makers or just good shop tool...
orangecounty.craigslist.org
catalytic
Well-known member
^^That looks like a Coote belt grinder https://cootebeltgrinder.com/ Knifemakers like them a lot -- they are simple, dependable, effective machines. Still USA-made, $530-700 depending on size without the motor (which appears to be a very nice motor! -- 2 start caps = single phase and possibly hi-torque cap-start-cap-run. From the size, I would guess 1.5hp, though impossible to know for sure. It's a very good deal.
If you buy it, put a belt guard on it so you get to keep your fingers.
If you buy it, put a belt guard on it so you get to keep your fingers.
tool_scrounge
Well-known member
^ I thought I had seen that belt grinder design before.
The seller just lowered the price to $100
(must control urge to buy another belt grinder
I would buy it but I already have an equivalent.
The seller just lowered the price to $100
(must control urge to buy another belt grinder
I would buy it but I already have an equivalent.
bubinga
Well-known member
The one l have has the VERY SAME tension handle. l gave $7.00 years ago at the flea market.$200 2x72 inch belt grinder
Orange County, California
2x72” Belt Grinder - tools - by owner - sale
2x72” belt grinder, heavy duty, adjustable speed. Motor works well, but on/off switch doesn’t work. I just plug it in and out without issue. Perfect for beginner knife makers or just good shop tool...orangecounty.craigslist.org
Mine didn't have a table at all, l had to micky mouse one.
catalytic
Well-known member
Same... I have 3 burr kings and a shelf of accessories and I still jump a little whenever I see a nice one like this... Someone will get a nice grinder.(must control urge to buy another belt grinder
Well you ****...belatedly. 21 cents per pound for a nice USA-made belt grinder...
tool_scrounge
Well-known member
Millrite MV vertical milling machine $800
Location: Southern California (Simi Valley)
One of the stiffest small footprint vertical mills. High quality. This is the short XY table version for even a smaller footprint. Very sought after and not very common on the used market.
To answer a few questions you might ask:
What collet size? - R8 or B&S #9 (doesn't matter at this price, both are available)
Is the motor single phase? Could be three phase. If so, buy a VFD at this price. Easy to interface.
Location: Southern California (Simi Valley)
One of the stiffest small footprint vertical mills. High quality. This is the short XY table version for even a smaller footprint. Very sought after and not very common on the used market.
To answer a few questions you might ask:
What collet size? - R8 or B&S #9 (doesn't matter at this price, both are available)
Is the motor single phase? Could be three phase. If so, buy a VFD at this price. Easy to interface.
Millrite MV manual mill - tools - by owner - sale
Millrite MV manual mill. Good working order. Miscellaneous parts included. Email to arrange for viewing and pick-up. We cannot ship this item.
ventura.craigslist.org
tool_scrounge
Well-known member
Location San Diego,CA (Claremont)
Peerless universal power hacksaw $200
900 lbs of power hacksaw that can cut thru up to 6”x6” materials.
Unique design in that it cuts vertically,
Not pivoting from one side.
3 speed.
Blades are often cheap on ebay
https://sandiego.craigslist.org/csd/tls/d/san-diego-universal-metal-saw/7620474858.html
Manual:
http://vintagemachinery.org/pubs/detail.aspx?id=16377
Peerless universal power hacksaw $200
900 lbs of power hacksaw that can cut thru up to 6”x6” materials.
Unique design in that it cuts vertically,
Not pivoting from one side.
3 speed.
Blades are often cheap on ebay
https://sandiego.craigslist.org/csd/tls/d/san-diego-universal-metal-saw/7620474858.html
Manual:
http://vintagemachinery.org/pubs/detail.aspx?id=16377
jalexl
Active member
Is this your mill that you are selling?Millrite MV vertical milling machine $800
Location: Southern California (Simi Valley)
One of the stiffest small footprint vertical mills. High quality. This is the short XY table version for even a smaller footprint. Very sought after and not very common on the used market.
To answer a few questions you might ask:
What collet size? - R8 or B&S #9 (doesn't matter at this price, both are available)
Is the motor single phase? Could be three phase. If so, buy a VFD at this price. Easy to interface.
Millrite MV manual mill - tools - by owner - sale
Millrite MV manual mill. Good working order. Miscellaneous parts included. Email to arrange for viewing and pick-up. We cannot ship this item.ventura.craigslist.org
I am very interested..
It was not tool_scrounge selling the mill but in any case, you're too late. I bought it!
jalexl
Active member
gotcha, cool...
First and foremost, it's got a 3 phase motor on it, so until I get a vfd sorted, I can't even turn it on.
For now, I'm still trying to make room in my shop, and I've been building a dolly for it so I can move it into a corner where the hoist won't reach.
Attachments
Crabman
Well-known member
isb cornbinder
Well-known member
This was on the Local Craigslist when this popped up in the TOOLS section . I did the screen shot minutes after the pictures were posted. Note: I did block the contact information. Craigslist removed the post in a few minutes.
There must be a few classic Craigslist cliches for this offering.
There must be a few classic Craigslist cliches for this offering.
Attachments
SnapOnSnapOff
Well-known member
- Joined
- Sep 11, 2021
- Messages
- 65
That's the best tool you can own...
Crabman
Well-known member
Hour SE of Wash DC
Columbian vice $1.25/lb. $35
Not sure the model my eyes are too old to see.
Columbian vice $1.25/lb. $35
Not sure the model my eyes are too old to see.
COLUMBIAN HEAVY DUTY VICE - tools - by owner - sale
This heavy-duty made in the USA vice weighs 28 pounds.
smd.craigslist.org
I'd guess empty?
illus101086
Well-known member
Man i miss craigslist hahaha
Don't always assume.
I bought a fully loaded snap on chest at an estate sale for $800 a few years ago. My absolute best score ever.
All I had to do was match the lowball offer from the local snap on dealer - I would still buy that shady ***-wipe a beer for the solid he did me though.
Snap-On vintage side cabinet $185 - north DFW area
Snap-On KRM-274 Side/End Cabinet 3 Drawer 2 Shelves USA - tools - by...
Snap-On KRM-274 Side/End Cabinet 3 Drawers 2 Shelves Made in USA $ 185.00 See photos for condition and size Local pickup in Cross Roads, TX IF POST IS UP ITEM IS STILL AVAILABLE For purchase Please...
dallas.craigslist.org
Los Angeles Area (San Fernando Valley) box set of Mitutoyo Micrometers: $50.
Mitutoyo
I'd grab them myself but I'm out of town this week.
Mitutoyo
I'd grab them myself but I'm out of town this week.
Vintage Snap On tool box - tools - by owner - sale
Vintage Snap on tool box. Needs cleaned up and guides lubed. Cool old box . call or text $175 obo
lubbock.craigslist.org
Electric Paint Shaker - tools - by owner - sale
Unbranded 1 gallon paint shaker. Guessing it's an old-school Red Devil model. Good working condition. $800 OBO. You haul.
dallas.craigslist.org
Vintage Cornwell Tool Cabinet - tools - by owner - sale
This is a nice, old Cornwell Roller Tool Cabinet The cabinet has been thoroughly cleaned inside and out and is in good working condition and looks great. I believe it is from the 1950s or early...
dallas.craigslist.org
Yale 6Ton Chainhoist - tools - by owner - sale
Old school lever assisted chainhoist in like new condition.Manufactured by Yale in Forrest City Ark..Cast into body of hoist are the following; Eaton 9f Cash only no scams and no paypal.
dallas.craigslist.org
Vintage 1950's Craftsman Crown Logo Rolling Tool Chest 6 Drawers -...
Vintage 1950's Craftsman Crown Logo Rolling Tool Chest with 6 Drawers. This old tool chest is in great condition! All drawers are clean and pull out and back in smoothly. Bottom 2 drawers have very...
portland.craigslist.org
Last edited:
Festool sander with systainer. Send it in for repair? Near Boulder, Colorado
https://boulder.craigslist.org/tls/d/boulder-festool-sander-ets-eq-parts/7642292036.html
https://boulder.craigslist.org/tls/d/boulder-festool-sander-ets-eq-parts/7642292036.html
Criminal
Well-known member
Attachments
Motown
Well-known member
bubinga
Well-known member
no big deal, but there's a long running thread, "Found a deal in Facebook Marketplace"
Found A Deal On Facebook Marketplace? Post It Here
Yup. I've really been tempted to go get it just because it's so cheap. I can probably find a way to install a phase converter for that price... Looks nice, I wonder what it weighs....
www.garagejournal.com
Dake 60 ton press - tools - by owner - sale
Good old Dake 60 ton press Comes with hot rivet tooling WW2 era press , they don't make em like this anymore! $1000
phoenix.craigslist.org
Vintage Proto Tool Chest with Lamp - tools - by owner - sale
Nice Vintage Mobile Proto Tool Chest with Lamp and Power Outlet Dimensions 37" High x 30" Wide x 18" Deep $425 OBO CASH and PICK-UP ONLY Text or Call with any questions.
denver.craigslist.org
Attachments
Last edited:
Crabman
Well-known member
Hour south of Wash DC, huge pile of nice Milwaukee tools $1000
Milwaukee Tools - tools - by owner - sale
All milwaukee tools. All tools are in good working order and some almost new. All tools are extra or ones I don’t really use. So selling as a bundle Only. Please don’t ask to break up. $900 cash you...
smd.craigslist.org
Crabman
Well-known member
Milwaukee tools down to $900
Milwaukee Tools - tools - by owner - sale
All milwaukee tools. All tools are in good working order and some almost new. All tools are extra or ones I don’t really use. So selling as a bundle Only. Please don’t ask to break up. $900 cash you...
smd.craigslist.org
What looks like a Wilton C3 for $300 in the San Diego California Area.
1940's Wilton 6" Jaw Bullet Bench Vise
Edit: That didn't last long.
1940's Wilton 6" Jaw Bullet Bench Vise
1940's Wilton 6" Jaw Bullet Bench Vise - tools - by owner - sale - craigslist
Wilton, Chicago USA Available for pickup in Vista on 9/2 and 9/3 only. Needs to be unbolted from bench. Heavy! Works! Serious inquiries only. $300 or best offer cash only Reply by email, thanks!
sandiego.craigslist.org
Edit: That didn't last long.
Last edited:
tool_scrounge
Well-known member
Snap-on KRA-59? tool chest $190
Location: Tustin, Orange County, California
26” wide top tool chest, has sliders but can be very smooth when cleaned and lubricated with paraffin waxed rubbed on. Weighs about 100 lbs. Truely built like a tank. I really like these tool chests.
https://orangecounty.craigslist.org/tls/d/tustin-snap-on-toolbox-with-keyed/7658868779.html
Location: Tustin, Orange County, California
26” wide top tool chest, has sliders but can be very smooth when cleaned and lubricated with paraffin waxed rubbed on. Weighs about 100 lbs. Truely built like a tank. I really like these tool chests.
https://orangecounty.craigslist.org/tls/d/tustin-snap-on-toolbox-with-keyed/7658868779.html
Last edited: