Show your new tool arrivals

[Trapps]

I have not used them yet, but I like the fit & finish; they feel sturdy.

 

[InjectorService]

I went through a similar thing with Amazon recently. The item I bought was listed as new, but clearly was open box, missing parts and had some damage (cosmetic only, but regardless I paid for new). I created a claim through them, and they refunded me completely, and let me keep it.

It's quite possible yours would go the same way.

Also I've had good success with messaging them through the chat to initiate this. Just tell them the truth. You go the impact, it looked like this, but you need it and don't have a choice to use it now, but you still want your replacement.

No tax on your conscience, and you still get your new impact.

 

[Wiz02]

I went through a similar thing with Amazon recently. The item I bought was listed as new, but clearly was open box, missing parts and had some damage (cosmetic only, but regardless I paid for new). I created a claim through them, and they refunded me completely, and let me keep it.

It's quite possible yours would go the same way.

Also I've had good success with messaging them through the chat to initiate this. Just tell them the truth. You go the impact, it looked like this, but you need it and don't have a choice to use it now, but you still want your replacement.

No tax on your conscience, and you still get your new impact.

You worded that much better than I did

 

[Steve_P]

I went through a similar thing with Amazon recently. The item I bought was listed as new, but clearly was open box, missing parts and had some damage (cosmetic only, but regardless I paid for new). I created a claim through them, and they refunded me completely, and let me keep it.

It's quite possible yours would go the same way.

Also I've had good success with messaging them through the chat to initiate this. Just tell them the truth. You go the impact, it looked like this, but you need it and don't have a choice to use it now, but you still want your replacement.

No tax on your conscience, and you still get your new impact.

Honestly, this is the right thing to do. But I wouldn't waste my time doing it. Because it doesn't matter. This one is on Amazon, they should NOT have shipped this item, and I would not waste my time justifying this to them. They get tens of thousands of returns a day, and as long as you are a good customer, they don't question it. So I wouldn't waste my time.

Last year I got a package that I didn't order from another huge online retailer. I ordered something from them, got it, and then got another box the next day. It wasn't my stuff, but was addressed to me. Inside there was the invoice with the person it was supposed to be sent to. I called them and spent over an hour of my time trying to make it right. It was a TOTAL exercise in frustration trying to do the right thing. They refused to just send Fed Ex to pick it up. Said I had to print a label, etc. I have that capability, but I was like this is your screw up.... just have them pick it up. They insisted Fed Ex couldn't print a label. I said, I understand the driver can't, but don't tell me that they can't do it at the place where they load the trucks.... You come get it if you want it. So, I left it on my porch for 3-4 days and they never got it. I got sick of looking at it and printed a label. Next day there's the Fed Ex guy walking up with a label for it. This is what happens when you do the right thing. At least in my case.

 

[Steve_P]

The fact that they have more than the standard 6/32 and 8/32 bolt cutter is a plus. Those also do a darned good job of crimping. If you have to do a bunch, you're gonna hate having the stripper behind the hinge. I have an almost 30 year old pair around here somewhere. Only used about three times.

I have a couple of those also; one is from my dad that was an industrial electrician. I also never use them. I much prefer a separate stripper and crimper. I understand that these are useful for a industrial electrician to save space in their bag, and I'm sure they are perfectly functional, but I just prefer separate tools.

 

[InjectorService]

Honestly, this is the right thing to do. But I wouldn't waste my time doing it. Because it doesn't matter. This one is on Amazon, they should NOT have shipped this item, and I would not waste my time justifying this to them. They get tens of thousands of returns a day, and as long as you are a good customer, they don't question it. So I wouldn't waste my time.

Last year I got a package that I didn't order from another huge online retailer. I ordered something from them, got it, and then got another box the next day. It wasn't my stuff, but was addressed to me. Inside there was the invoice with the person it was supposed to be sent to. I called them and spent over an hour of my time trying to make it right. It was a TOTAL exercise in frustration trying to do the right thing. They refused to just send Fed Ex to pick it up. Said I had to print a label, etc. I have that capability, but I was like this is your screw up.... just have them pick it up. They insisted Fed Ex couldn't print a label. I said, I understand the driver can't, but don't tell me that they can't do it at the place where they load the trucks.... You come get it if you want it. So, I left it on my porch for 3-4 days and they never got it. I got sick of looking at it and printed a label. Next day there's the Fed Ex guy walking up with a label for it. This is what happens when you do the right thing. At least in my case.

I agree with you, and in this case I'd do the same, but it seems the poster wasnt comfortable with that, so I was giving him a way out.

 

[WWheeler]

Here's what's new now for me ...

First, a couple 'saw it here and had to have it' type things ...
- Koken 3762 Flexible Extension (ordered this mid-Sept after midorix posted theirs in this thread)



And a Capri Tools P12270 3pc Locking Universal Joint Set (That Fedwrench mentioned here).



And I have a small project coming up and a few things I'm going to need...

- Dewalt DCW600 20V cordless router (This thing's F'in awesome. I should have bought one years ago)



- Freud SD208S 8 in Dado Set & TonGass aluminum dado throat plate (for my Dewalt DWE7491RS 10" jobsite table saw)



And a Makita AF601 finish nailer ...

 

[Steve_P]

Here's what's new now for me ...

First, a couple 'saw it here and had to have it' type things ...
- Koken 3762 Flexible Extension (ordered this mid-Sept after midorix posted theirs in this thread)



And a Capri Tools P12270 3pc Locking Universal Joint Set (That Fedwrench mentioned here).



And I have a small project coming up and a few things I'm going to need...

- Dewalt DCW600 20V cordless router (This thing's F'in awesome. I should have bought one years ago)

I would like to have just the 1/4" locking u-joint from that set. But they don't sell them separately, and I'd know I'd never use the others. I also considered the Koken flex extension, but would probably never use it. I know this is GJ, but I'm totally out of space. Both toolbox, and floor space to fit another toolbox

I have that DeWalt router and it's absolutely awesome. I am not a woodworker, but it's freaking great! It works fantastic, and it's a pleasure to not have to drag a cord around.

 

[Lowlevel2021]

High torque boot

 

[Catfishdan]

I’ve been on a Knipex buying kick recently. Latest addition is the 10” mini bolt cutters. I’m tired of breaking out the grinder ever time I have to cut a nail or screw.

 

[ChefRex]

I’ve been on a Knipex buying kick recently. Latest addition is the 10” mini bolt cutters. I’m tired of breaking out the grinder ever time I have to cut a nail or screw.

I have a couple of pairs, they see a lot of use!

 

[Squankum]

(Error on my end, sorry.)

 

[Squankum]

I’ve been on a Knipex buying kick recently.

I was, too. Only lasted about eight years!

 

[Kasal]

"Pan" wrenches for oil filters, Bahco BE630

 

[2ndGearRubber]

Snap On 1/4, 3/8, and 1/2 torque adapters.

 

[bpwoodworking]

I’ve been on a Knipex buying kick recently. Latest addition is the 10” mini bolt cutters. I’m tired of breaking out the grinder ever time I have to cut a nail or screw.

These things are amazing! I have the 8” bolt cutters in my job box and they make cutting small bolts practically effortless.

 

[Toomanytools?]

These things are amazing! I have the 8” bolt cutters in my job box and they make cutting small bolts practically effortless.

Great now I'm going to have to get a pair.

 

[will335i]

I have not used them yet, but I like the fit & finish; they feel sturdy.

I have a set of these and I have been super happy with them. I am trying to decide if I get another or go with the HF Daytona version.

 

[Meursault74]

Great now I'm going to have to get a pair.

Gedore makes some mini bolt cutters that look the same. Maybe worth a look. If they are the same as Knipex I couldn't tell you. I did get the Gedore brand when it was on sale for significantly less than Knipex.

Show your new tool arrivals

Thanks. Oh man, you gotta be careful with Amz Jpn! So many nice tools & at great prices even with priority shipping. Not just tools either, bunch of other cool Japanese market only stuff. Unless it's a really small order (which rarely happens for me), I always go with priority shipping, doesn't...

www.garagejournal.com

 

[Squankum]

I recently flaunted my new Malco Vise Eagle Grips. I got them from Harry J. Epstein's for $29.95ish plus $6ish shipping (well, I bought two, shipping was $12 total. Like you can buy only one thing from HJE!)

Today I stumbled across them at Amazon for more than that! So if you're thinking of getting some, please consider HJE. Quite the fair deal.

https://www.amazon.com/dp/B0924QDF47/?tag=atomicindus08-20

 

[carmantl]

Capri's mini bolt cutters from Amazon are the real deal. I don't know if they are quite the quality of the ones listed above but they have not let me down on smaller bolts.

 

[jayemm]

Decided to replace my old clublike, clunky C-man 1/2" ratchet with something more comfortable and long enough for good leverage (11-3/4" total). And a set of SUNEX 12-24mm , 12 point metric since my metrics in 3 drive sizes including impact are all 6 point. Done on a budget since they will see infrequent, not too demanding, usage. Sockets (which includes aluminum rail) came today, ratchet 2 weeks ago. All made in Taiwan and fits together nice and feels solid. I couldn't resist at ~ $20 each on Amazon. Sold an old ratchet last week for $20 which reduced total outlay even further.

 

[captain14]

Husky 6 way screwdriver @ $4.97.

Milwaukee door lock hole saw kit. I had to replace a mortise lock in my back door. It finally failed at 84 years old.

 

[Squankum]

Husky 6 way screwdriver @ $4.97.

Milwaukee door lock hole saw kit. I had to replace a mortise lock in my back door. It finally failed at 84 years old.

Hey, that Milwaukee thing is a locating jig! Neat!

 

[Shocker]

Just a few new things over the last couple weeks:


Like new Malco 12" snips, the ubiquitous Kipex Cobra 3 pack, a 7" and 10" Channel Lock needle nose grips (Grip On made in Spain) and the last is the Apex SAE Hex long bit set made in Taiwan.

 

[atikovi]

I have not used them yet, but I like the fit & finish; they feel sturdy.

Wouldn't they be wobbly compared to regular stands with four feet widely spaced out? Especially if the ground wasn't perfectly smooth.

 

[atikovi]

Locking air chuck from LockNFlate. Locks on the tire valve. Will use it most for filling a portable air tank which can take over a minute. I can attach it and walk away to do other stuff while it fills.

 

[mikeinri]

Milwaukee door lock hole saw kit. I had to replace a mortise lock in my back door. It finally failed at 84 years old.

Wow, I could have used that when I bought this house! Using the paper "template" I managed to cut the new hole (deadlock, front door) about 1/16 off, just enough so that I can use the handle lock, and close the door securely against the weatherstrip, or use the deadbolt (without the handle bolt catching in its hole, and without a great weather seal), but not both. Thankfully, I did a better job with the other two doors, LOL...

Wouldn't they be wobbly compared to regular stands with four feet widely spaced out? Especially if the ground wasn't perfectly smooth.

I was wondering the same thing.


Mike

 

[jgeoffr]

I love playing Amazon arbitrage when it comes to tools. Picked up some Estwing hammers and tools from Amazon.sa at a good discount over Amazon US.

Big Blue Engineer's hammer $19.25
15oz ultra series hammer (smooth face) $19.18
12oz ball peen hammer $9.74
5oz tack hammer $6.95
12" nail puller pry bar $6.66
10" moulding puller $6.91



All prices out the door and to my doorstep.

 

[66HertzClone]

Wouldn't they be wobbly compared to regular stands with four feet widely spaced out? Especially if the ground wasn't perfectly smooth.

That's exactly what I think when I look at those, HF has a variant that looks much like those and I just don't feel comfortable wit the size of the base.

 

[will335i]

Wouldn't they be wobbly compared to regular stands with four feet widely spaced out? Especially if the ground wasn't perfectly smooth.

Wow, I could have used that when I bought this house! Using the paper "template" I managed to cut the new hole (deadlock, front door) about 1/16 off, just enough so that I can use the handle lock, and close the door securely against the weatherstrip, or use the deadbolt (without the handle bolt catching in its hole, and without a great weather seal), but not both. Thankfully, I did a better job with the other two doors, LOL...




I was wondering the same thing.


Mike

That's exactly what I think when I look at those, HF has a variant that looks much like those and I just don't feel comfortable wit the size of the base.

I have had zero issue with them being wobbly. If the surface you are using these on would cause it to be wobbly after the weight of the vehicle is applied, you probably shouldn't be using jack stands on that surface and I would doubt a traditional stand would be able to have all 3 / 4 feet touching properly.

 

[purplezr2]

I have not used them yet, but I like the fit & finish; they feel sturdy.

Do you like your bosch tracksaw?

 

[Trapps]

Wouldn't they be wobbly compared to regular stands with four feet widely spaced out? Especially if the ground wasn't perfectly smooth.

I considered that. After reading lots of reviews, and knowing I'll be using them on my driveway and garage floor, I feel confident.

Amazon.com: BIG RED T43004 Torin Aluminum Jack Stands with Locking Support Pins: 3 Ton (6,000 lb) Capacity, Red/Silver, 1 Pair: Automotive

Amazon.com: BIG RED T43004 Torin Aluminum Jack Stands with Locking Support Pins: 3 Ton (6,000 lb) Capacity, Red/Silver, 1 Pair: Automotive

www.amazon.com

However, if during the first use, I am not confident/comfortable, I can fab a wider plate for them to sit on.

 

[Trapps]

Do you like your bosch tracksaw?

I love it!!! I wish I'd bought it years ago. I also have a router attachment for the rails and that works superbly. A close friend has a Festool set up and another has a Makita rig. I've used them all and I think the Bosch connection (2 rails) is easier to align and use.

 

[66HertzClone]

This is exactly what I was trying to say. Thanks Trapps for putting it in context.

However, if during the first use, I am not confident/comfortable, I can fab a wider plate for them to sit on.

 

[M635_Guy]

Wouldn't they be wobbly compared to regular stands with four feet widely spaced out? Especially if the ground wasn't perfectly smooth.

No, at least on a flat surface. I don't do jack stands of any kind if it's not a flat surface though. If I had to choose something, I'd go with the Esco tripod-style with the big, round, flat feet.

 

[Squankum]

No, at least on a flat surface. I don't do jack stands of any kind if it's not a flat surface though. If I had to choose something, I'd go with the Esco tripod-style with the big, round, flat feet.

I bought a pair of those aluminum-based jackstands years ago (they had round bases then) and they always kinda creeped me out.)

I do have some sets of ESCOS and love them. There are regular, with the rubbery flat top, and now, slightly shorty with the rubbery flat top -- and if you hunt the part numbering system, model 10498K gets you a post with rubbery flat top, and a post with saddle/frame rail holder top.

You are being redirected...

These are my current faves for my lowish unibody cars. For body-on-frame dinosaur beasts, I now have a set of US Jack jackstands that are very well made, made in America, priced accordingly. Alas, they are danged large. In fact, I probably only use them on the Durango because the Econoline has only so much ceiling height above it.

 

[M635_Guy]

I bought a pair of those aluminum-based jackstands years ago (they had round bases then) and they always kinda creeped me out.)

I do have some sets of ESCOS and love them. There are regular, with the rubbery flat top, and now, slightly shorty with the rubbery flat top -- and if you hunt the part numbering system, model 10498K gets you a post with rubbery flat top, and a post with saddle/frame rail holder top.

You are being redirected...

These are my current faves for my lowish unibody cars. For body-on-frame dinosaur beasts, I now have a set of US Jack jackstands that are very well made, made in America, priced accordingly. Alas, they are danged large. In fact, I probably only use them on the Durango because the Econoline has only so much ceiling height above it.

I have a set of the Daytona "stick" style stands that are pretty much for travel - light/etc. but they're really stable.

I've got a set of Escos and the Daytona copies (which are more nicely-made than my Esco set - lol) that are great. I kinda like the ability to 'point the leg' in the direction I want to be most-resistant to tipping, and the big round feet are good also. I almost got the Escos that have both post styles, but until recently I had the more common style box stands that are fine for axles, etc. (I gave them to a friend who's here from overseas since he's getting ready to do a giant project on his car and I have so many stands).

 

[bpwoodworking]

Stabil 20’s just happened upon my doorstep.

 

[upgrading]

Amazon
Seen a page or two back


I think those Long Nose Channellocks up above are next
For now


From Ebay
My Dyson batt was getting weak
Look on Dyson site for replacement and looked at price and ruled that out quick
Generic batts were kind of mixed and then found this adapter.
Works fine, so now my Dyson is a Dyobi
Only issue is one has to remove the batt to empty container, no biggie