To avoid these ads, REGISTER NOW!

Show your new tool arrivals

N

NYBODYMAN

Well-known member
Joined
Sep 10, 2013
Messages
4,854
Location
NY
Kinda went on a binge last week which was ignited by the Astro Pneumatic BOGO and a Tool Box Tour YouTube video 😎.

Astro BO (waiting on my GO-nano socket ratchet), Capri Tools soft rubber mallet-made for installing interior panels, CTA Tools ball joint hammer nut kit, Sunex 7/8" nylon lug nut sockets, LTI Tools shape tip tool for metal working dents and creases, PDR hole straightening pliers, and long reach scissor grip tweezers.

1000006776.jpg
Also grabbed this Milton drill adapter. It attaches to a 1/4" air ratchet for close access. Brilliant idea. Just hope it holds up.

miltonindustries.com

PowerDrive Drill/Driver Threaded Bit Adapter

Shop now for Milton's adapter to turn your ratchet into a drill, experiencing power in tight spaces, and boosted productivity.
miltonindustries.com miltonindustries.com

1000006784.png
 
Last edited:
To avoid these ads, REGISTER NOW!
L

lund

Well-known member
Joined
Nov 2, 2019
Messages
794
Location
Michigan
shibertus said:
New-to-me Armstrong USA ratcheting wrench set

DSC_8052.jpg
Click to expand...
I have the Craftsman rebranded version of this set. Has held up very well in 25+ years of heavy use. You will like it. The set is the right combination for tradeoffs on bulk and strength and they are high quality and well finished. It is a shame that this type of high value usa production disappeared.
 
J

JWC86

Well-known member
Joined
Sep 4, 2021
Messages
270
IMG_6389.jpegIMG_6390.jpegIMG_6391.jpegOne more thing:
90deg Carb adjustment Tool



First impressions are good. I was going to get the motion pro version but the reviews were terrible.

Only thing I don’t care for on this one is the bits seem to be proprietary. Would be very handy if it just took standard 1/4 bits.
 
W

WWheeler

Well-known member
Joined
Jun 23, 2015
Messages
4,105
Location
Middleofnowhere USA
NYBODYMAN said:
Kinda went on a binge last week which was ignited by the Astro Pneumatic BOGO and a Tool Box Tour YouTube video 😎.

Astro BO (waiting on my GO-nano socket ratchet), Capri Tools soft rubber mallet-made for installing interior panels, CTA Tools ball joint hammer nut kit, Sunex 7/8" nylon lug nut sockets, LTI Tools shape tip tool for metal working dents and creases, PDR hole straightening pliers, and long reach scissor grip tweezers.

1000006776.jpg
Also grabbed this Milton drill adapter. It attaches to a 1/4" air ratchet for close access. Brilliant idea. Just hope it holds up.

miltonindustries.com

PowerDrive Drill/Driver Threaded Bit Adapter

Shop now for Milton's adapter to turn your ratchet into a drill, experiencing power in tight spaces, and boosted productivity.
miltonindustries.com miltonindustries.com

1000006784.png
Click to expand...
Damn Amazon.

I missed out on the BOGO because I'd already ordered that Astro set weeks before that on July 2nd when it was still waiting to be back in stock.

Mine still hasn't shipped. Still says it's due Aug 2nd.

EDIT: It did arrive Saturday (7-27-24), so Amazon wasn't great but not as bad as I'd been trashing them.
 
Last edited:
M

mikeinri

Well-known member
Joined
Nov 29, 2019
Messages
8,241
Location
MA
JWC86 said:
Tekton flare nut crows feet.
I’ve been impressed with the other Tekton made in USA tools I’ve had and I like the direction the company is going. Plus the storage solution they provide is perfect.
IMG_6316.jpeg
IMG_6317.jpeg
Click to expand...

Link to buy the set?

Mike
 
M

M635_Guy

Well-known member
Joined
Dec 5, 2019
Messages
4,335
Location
NC
A number of new tools lately as I've been doing demo on a 'new' house (built in '86 and lightly maintained/updated, so lots to do before we move in).

The most-recent:
sWWIHZ.jpg

Not pictured:
M18 FUEL Sawzall - has been a beast. Vastly better than my Hackzall... (M12 FUEL - don't recall if there's a non-FUEL M12)

M18 1/4" router - have used at the new place for a bunch of baseboards and a couple door hinge plates so far. It's great. I have a fantastic corded 1/2" router, but boy is the lightness and lack of a cord a big plus IMHO.
 
S

Squankum

Well-known member
Joined
Mar 28, 2011
Messages
7,725
Location
Southeast
B

bobg03

Well-known member
Joined
Aug 29, 2020
Messages
3,420
Location
conway sc
F

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,953
Location
Tacoma, Washington
^ errr... wait... so to get at the one in the middle you have to pull all of them off that stick? :headscrat

I would very much like to be able to find some sort of device that will actually HOLD 1/2" drive deep-wells that can be loaded into a BAG and is somewhat compact like that. Those "rail" things are too long. The magnetic "tray" thingie is too large.
 
2

2ndGearRubber

Well-known member
Joined
Mar 24, 2014
Messages
14,185
Location
Pittsburgh
four.cycle said:
^ errr... wait... so to get at the one in the middle you have to pull all of them off that stick? :headscrat

I would very much like to be able to find some sort of device that will actually HOLD 1/2" drive deep-wells that can be loaded into a BAG and is somewhat compact like that. Those "rail" things are too long. The magnetic "tray" thingie is too large.
Click to expand...

Yeah it's annoying. The snap on design that splits in the middle is much nicer to use.
 
S

Squankum

Well-known member
Joined
Mar 28, 2011
Messages
7,725
Location
Southeast
four.cycle said:
^ errr... wait... so to get at the one in the middle you have to pull all of them off that stick? :headscrat

I would very much like to be able to find some sort of device that will actually HOLD 1/2" drive deep-wells that can be loaded into a BAG and is somewhat compact like that. Those "rail" things are too long. The magnetic "tray" thingie is too large.
Click to expand...

Yeah, I will admit that the Snap On "two sticks pointed at each other" device is better -- and fairly priced! -- just a question of access to truck guy or shipping charges.

Snap On item # A277

My ordering the Tektons on Amazon had minimal opportunity cost. And I don't reach for these tools very often, either.
 
S

Squankum

Well-known member
Joined
Mar 28, 2011
Messages
7,725
Location
Southeast
four.cycle said:
I would very much like to be able to find some sort of device that will actually HOLD 1/2" drive deep-wells that can be loaded into a BAG and is somewhat compact like that. Those "rail" things are too long. The magnetic "tray" thingie is too large.
Click to expand...

I'm stumped on this one!

Maybe a coil of aircraft linked ammo belt?

 
F

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,953
Location
Tacoma, Washington
Squankum said:
"...I don't reach for these tools very often..."
Click to expand...

^ Valid point. I have never used a crow foot in my entire life, and the ONLY time I actually had need of one was on a late-model Troy-Bilt walk-behind and after some fumbling around I got to the bolt with an open-end, but it was challenging.

My objective there with that comment:
The green roll-up bags I bought in January are really nice, but I'd like to be able to have the sockets held in or on something other than a zip-lock bag and save myself the trouble of fumbling around searching for the right size. The pockets simply aren't long enough for those "rail" things (which I've found to be fairly useless.)
 
Last edited:
I

isb cornbinder

Well-known member
Joined
Nov 3, 2010
Messages
7,073
Location
Pacific South West, BC, Canada
Way back when I was an apprentice, one of the mechanics was an amateur ***-hat. On day he threw his tools on the shop floor and ordered me to pick them up. I did as I was told. After picking up his tools. I tossed them in the scrap-bin. I had my apprenticeship hours in and my certificate of completion of 4 years. I had not told anyone, yet. I think it might be correct to say, "The tools hit the fan."
 
To avoid these ads, REGISTER NOW!
S

Squankum

Well-known member
Joined
Mar 28, 2011
Messages
7,725
Location
Southeast
D

DAustin

Well-known member
Joined
Jul 30, 2021
Messages
5,164
four.cycle said:
^ errr... wait... so to get at the one in the middle you have to pull all of them off that stick? :headscrat

I would very much like to be able to find some sort of device that will actually HOLD 1/2" drive deep-wells that can be loaded into a BAG and is somewhat compact like that. Those "rail" things are too long. The magnetic "tray" thingie is too large.
Click to expand...
Have someone sew you up something like a roll up bandolier.
 
S

Squankum

Well-known member
Joined
Mar 28, 2011
Messages
7,725
Location
Southeast
four.cycle said:
^ Valid point. I have never used a crow foot in my entire life, and the ONLY time I actually had need of one was on a late-model Troy-Bilt walk-behind and after some fumbling around I got to the bolt with an open-end, but it was challenging.

My objective there with that comment:
The green roll-up bags I bought in January are really nice, but I'd like to be able to have the sockets held in or on something other than a zip-lock bag and save myself the trouble of fumbling around searching for the right size. The pockets simply aren't long enough for those "rail" things (which I've found to be fairly useless.)
Click to expand...

My only other guess is a loop of paracord and a knot. Prevents them from being lost, and consumes no space, allows sockets to conform to available space but not be too messy. Good melee weapon, too.

Hmmm...
1/2" dowel! Big box hardware stores sell them in both round and square anymore, not that square helps with anything, except maybe keeping all the socket size markings linked up and visible. You could have one or two or three shafts o' socket in the bottom of the tool bag. How you close off each end and how you make at least one end a temporary fixture, I dunno right now. Hitch pin?
 
R

richfinn

Well-known member
Joined
Jan 29, 2011
Messages
4,817
Location
Leeds, Yorkshire, England
Squankum said:
Sometimes when you're in a bind for a thin wrench and the torque involved isn't great, keep bicycle "cone" wrenches in mind. They're just stamped. Prices are affordable. This is a fancy version:

www.thebikesmiths.com

Park Tool SCW Pro Shop Cone Wrench

Endorsed and used here at THE BIKESMITHS The special "Y" head design puts more material where it's needed for strength and durability. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting...
www.thebikesmiths.com www.thebikesmiths.com

Here's the bare bones kind:


I've used the bare bones kind on rear caliper bolts on my old VW rear disc brakes, just holding the guide pin steady by its 15mm flats while I tighten the normal ol' bolt with a normal ol' socket/torque wrench.
Click to expand...

I just found a new use for my Park 15mm cone wrench today, I had a key Jammed in the ignition barrel of a Honda CRV and a regular wrench was too thick, slid the wrench between the key blade and the plastic fob and hammered it out 😂
 
F

Fedwrench

ALLIANCE MEMBER
Joined
Dec 9, 2007
Messages
14,955
Location
Valley of the sun
Astro Goodness in the form of 2 new 10.5 inch long 783105 Nano Socket ratchet wrenches. This is a great length for most applications :thumbup: I know many peeps will complain that it isn't reversible, doesn't lock, yada, yada, yada. I'm looking forward to using it :bounce: There's also a carbide scraper 9532. :beer:

Thanks ASTRO & Denny.
 

Attachments

  • P1010065.JPG
    P1010065.JPG
    158.1 KB · Views: 76
L

LeeG

Well-known member
Joined
Nov 29, 2012
Messages
1,527
Location
Phoenix, AZ
four.cycle said:
My objective there with that comment:
The green roll-up bags I bought in January are really nice, but I'd like to be able to have the sockets held in or on something other than a zip-lock bag and save myself the trouble of fumbling around searching for the right size. The pockets simply aren't long enough for those "rail" things (which I've found to be fairly useless.)
Click to expand...

Wrench Rings or large safety pins.
 
M

mikeinri

Well-known member
Joined
Nov 29, 2019
Messages
8,241
Location
MA
richfinn said:
I just found a new use for my Park 15mm cone wrench today, I had a key Jammed in the ignition barrel of a Honda CRV and a regular wrench was too thick, slid the wrench between the key blade and the plastic fob and hammered it out 😂
Click to expand...

Wow, what a PITA! Presumably, you had to then change the ignition lock?

Mike
 
A

AJHD

Well-known member
Joined
Jan 4, 2020
Messages
3,031
Location
AZ
jeffmoss26 said:
Picked these up at Lowe’s today, on sale for 10 bucks
Click to expand...

Squankum said:
Dang. Last Dec. I paid $45ish for an 8 pc. Wiha set. That's ridiculous! LIke their $12.99 set of five normal screwdrivers last summer!

Click to expand...


I noticed Lowes is getting rid of some of their Wiha stuff already. My guess is it's not selling.

On a positive note (at least for me), I stopped by Lowes yesterday to walk around in the A/C and kill a few minutes. They had a small pile of those mini Kobalt toolboxes for $20. I grabbed one. Surprisingly well built, only wish the lid had some form of retention to keep it closed. I might stop by on the way home and grab another one. I put all my 1/4" bit stuff and small screwdrivers/prybars in the one I got yesterday. Need to snap a picture.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom