Thank you in advance for the advice.
We now have more cars in use than we have garage capacity for which creates a problem when we get a plowable snowstorm here in NH. Our best idea to solve this economically is to build a lean-to carport next to our existing garage. However, we have only about 10' width for the carport before a steep dropoff which has me concerned about how to build the parking pad. I've put a few pictures below to help make it more clear. The existing garage is 34' deep and there is 10' between the garage and the dropoff near the driveway which narrows a bit to 9' near the rear of the garage. We know we need space for 1 vehicle and anticipate a 2nd is likely.
My current thought is to construct a gravel pad from where the driveway ends all the way down the side of the garage. The lean-to could be a metal kit or traditional framed construction. I haven't yet spoken with the town to see if they treat the structure differently if the lean-to is stand-alone or with the high-side attached to the existing structure. Note that the roof is 18' up and with a high pitch so I'm not so sure we can get a metal kit that will be close to the existing roof height. I'm concerned that sliding snow/ice from the garage roof will free fall a few feet and damage the lean-to roof if we don't get the roof lines close to each other.
(For those wondering why there is a garage door near the back pointing at the hill - I have no idea what they were thinking but it's sometimes useful for bringing projects out as the back half of the garage is the workshop).
Oh great minds of GJ, how would you construct an economical lean-to parking area here? What ideas do you have to make the parking pad stable against the hill?
Of course, the ideal solution is to extend the existing garage out over the hill, make a sublevel where the hill currently is and maybe an apartment above. That's never going to happen though in our high cost of living area. I was even thinking about trying to dig a 40' shipping container into the hill to make a wider base to work with for the parking pad. I have to imagine that will also be an expensive prospect but I welcome ideas.
(now that spring is approaching, we'll deal with the growth on the siding soon)
Taken from the driveway:

Looking back towards the driveway with our odd 3rd garage door.



We now have more cars in use than we have garage capacity for which creates a problem when we get a plowable snowstorm here in NH. Our best idea to solve this economically is to build a lean-to carport next to our existing garage. However, we have only about 10' width for the carport before a steep dropoff which has me concerned about how to build the parking pad. I've put a few pictures below to help make it more clear. The existing garage is 34' deep and there is 10' between the garage and the dropoff near the driveway which narrows a bit to 9' near the rear of the garage. We know we need space for 1 vehicle and anticipate a 2nd is likely.
My current thought is to construct a gravel pad from where the driveway ends all the way down the side of the garage. The lean-to could be a metal kit or traditional framed construction. I haven't yet spoken with the town to see if they treat the structure differently if the lean-to is stand-alone or with the high-side attached to the existing structure. Note that the roof is 18' up and with a high pitch so I'm not so sure we can get a metal kit that will be close to the existing roof height. I'm concerned that sliding snow/ice from the garage roof will free fall a few feet and damage the lean-to roof if we don't get the roof lines close to each other.
(For those wondering why there is a garage door near the back pointing at the hill - I have no idea what they were thinking but it's sometimes useful for bringing projects out as the back half of the garage is the workshop).
Oh great minds of GJ, how would you construct an economical lean-to parking area here? What ideas do you have to make the parking pad stable against the hill?
Of course, the ideal solution is to extend the existing garage out over the hill, make a sublevel where the hill currently is and maybe an apartment above. That's never going to happen though in our high cost of living area. I was even thinking about trying to dig a 40' shipping container into the hill to make a wider base to work with for the parking pad. I have to imagine that will also be an expensive prospect but I welcome ideas.
(now that spring is approaching, we'll deal with the growth on the siding soon)
Taken from the driveway:

Looking back towards the driveway with our odd 3rd garage door.





