To avoid these ads, REGISTER NOW!

Between 705 & 1200 SQ/FT Mixed Grill - From London , England - GRIZZMAKES world

Workspaces between 705 and 1200 squarefeet.
To avoid these ads, REGISTER NOW!
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Saturday John and his daughter came over by 10.30
Coffee, chat and by 11.00 I rolled the jack under the car.
Modern, 2017 Vauxhall Mokka X or in America it’s known as a Buick something

Long story short…..

Last MOT on this car had advisory on rear brakes, front ball joints.

John decided to replace complete lower control arms, 3 bolts and rear brakes shoes.

I “helped” with coffee, tools, reassembly etc.

Without space for two guys, I got some rubbing compound and polish out and fixed a few fender and door scrapes. Small things, make s difference.

5.5 hours later they drove off.

In both cases, the first side was longer than the second.

But, another job done, karma bucket hopefully topped up.

.
 

Attachments

  • IMG_8522.jpeg
    IMG_8522.jpeg
    775.5 KB · Views: 131
  • IMG_8524.jpeg
    IMG_8524.jpeg
    604.4 KB · Views: 71
  • IMG_8525.jpeg
    IMG_8525.jpeg
    588.5 KB · Views: 54
  • IMG_8527.jpeg
    IMG_8527.jpeg
    746.9 KB · Views: 50
  • IMG_3546.jpeg
    IMG_3546.jpeg
    1 MB · Views: 49
  • IMG_8533.jpeg
    IMG_8533.jpeg
    1.3 MB · Views: 55
  • IMG_8538.jpeg
    IMG_8538.jpeg
    854.7 KB · Views: 54
  • IMG_8540.jpeg
    IMG_8540.jpeg
    807.4 KB · Views: 52
  • IMG_8541.jpeg
    IMG_8541.jpeg
    499.9 KB · Views: 72
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
There is no need to hope, your karma bucket was already overflowing and now even more so, Otherwise karma does not exist. Great job!


Thank you.

I may drain it fast with the next photo in a set from today on facebook
 

Attachments

  • IMG_3603.png
    IMG_3603.png
    2 MB · Views: 61
  • IMG_3602.jpeg
    IMG_3602.jpeg
    108.9 KB · Views: 63
  • IMG_3601.jpeg
    IMG_3601.jpeg
    249.7 KB · Views: 58
  • IMG_3600.jpeg
    IMG_3600.jpeg
    257.8 KB · Views: 61
  • IMG_8636.jpeg
    IMG_8636.jpeg
    1.6 MB · Views: 58
  • IMG_3589.jpeg
    IMG_3589.jpeg
    278.3 KB · Views: 60
  • IMG_3586.jpeg
    IMG_3586.jpeg
    212.5 KB · Views: 62
  • IMG_8596.jpeg
    IMG_8596.jpeg
    444.3 KB · Views: 63
  • IMG_3581.jpeg
    IMG_3581.jpeg
    308.7 KB · Views: 68
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Labiaplasty?? :headscrat OK, now I'm really confused.

:beer:

Ahhhh yes.

Amazing it comes on my Facebook feed.

Facebook, despite pretending to be family friendly has whores and all sorts of other things being advertised and pushed on not just my feed.

Says a lot about how I am perceived I guess.

:+1: Confusion loves company:headscrat

See above.



I doubt many of you are beyond Google or breaking down words into their functional components.


So, along with all sorts of unsavouries this was advertising surgical services on my feed.



Have you figured it out yet??


At a stretch, I would explain, having qualified as a midwife a long time ago.
 

gman007

Well-known member
Joined
May 17, 2017
Messages
2,757
Location
West Michigan
You are sooooo gonna get me banned for a week.

I suggest you ask Google the following question.

DEFINE LABIAPLASTY


I HAVE ASKED AND GOT A 3 PAGE REPLY.



Go on……..



Let me know.


.

I did Google it last night and stopped reading after the words “Labiaplasty is a surgical procedure to reduce and reshape the labia minora, the inner folds of skin …!

Sounds like torture and mutation and should be illegal!

My confusion revolved around the seemingly irrelevance of the photos and also how there is no commonality among subject matters of the photos!
 
Last edited:

Finallygotit

ALLIANCE MEMBER
Joined
Jul 6, 2013
Messages
4,103
Location
Tucson, AZ
You are sooooo gonna get me banned for a week.

I suggest you ask Google the following question.

DEFINE LABIAPLASTY


I HAVE ASKED AND GOT A 3 PAGE REPLY.



Go on……..



Let me know.


.
Oh I know what a labiaplasty is........eeeeeeeeww and OUCH! And now I know it was a part of your FB feed. So what are YOU looking at?

So other than that, I guess maybe I'm missing something? It's early in the morning and the coffee hasn't kicked in yet.

:beer:
 
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
I did Google it last night and stopped reading after the words “Labiaplasty is a surgical procedure to reduce and reshape the labia minora, the inner folds of skin …!

Sounds like torture and mutation and should be illegal!

My confusion revolved around the seemingly irrelevance of the photos and also how there is no commonality among subject matters of the photos!

95% of the dipshits who may have it done already have rubber lips like a freak fish.
They mostly drive overpriced foreign cars that they certainly didn’t work for. And have more silicone than the toilets at an NBA stadium bathrooms.

You get the picture?

Oh I know what a labiaplasty is........eeeeeeeeww and OUCH! And now I know it was a part of your FB feed. So what are YOU looking at?

So other than that, I guess maybe I'm missing something? It's early in the morning and the coffee hasn't kicked in yet.

:beer:

Not missing a thing.

I am just amazed that a place like Facebook is permitted to exist and flourish despite being able to influence kids with not enough brain cells yet to chew and breathe at the same time.



I have delivered babies, including doing the episiotomy and repairing it successfully, so I know these areas quite well.
 

Attachments

  • IMG_3633.jpeg
    IMG_3633.jpeg
    170 KB · Views: 33
Last edited:
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Your turn readers.

You all get to explain the story today.

.
 

Attachments

  • IMG_8610.jpeg
    IMG_8610.jpeg
    509.8 KB · Views: 40
  • IMG_8611.jpeg
    IMG_8611.jpeg
    473.1 KB · Views: 37
  • IMG_8618.jpeg
    IMG_8618.jpeg
    696.2 KB · Views: 35
  • IMG_8619.jpeg
    IMG_8619.jpeg
    504.7 KB · Views: 35
  • IMG_8620.jpeg
    IMG_8620.jpeg
    568.9 KB · Views: 35
  • IMG_8629.jpeg
    IMG_8629.jpeg
    1.2 MB · Views: 35
  • IMG_8630.jpeg
    IMG_8630.jpeg
    618.2 KB · Views: 34
  • IMG_8631.jpeg
    IMG_8631.jpeg
    809.8 KB · Views: 34
  • IMG_8633.jpeg
    IMG_8633.jpeg
    679.1 KB · Views: 33
  • IMG_3642.png
    IMG_3642.png
    4.2 MB · Views: 41

gman007

Well-known member
Joined
May 17, 2017
Messages
2,757
Location
West Michigan
Your turn readers.

You all get to explain the story today.

.
Pedro called 911-Grizz and said the battery warning light is on! 😀

The new battery voltage was reading 10.7 volts. It seems the alternator was not charging the battery sufficiently.

The Battery seemed fine when it was charged by the charger, which confirmed that the alternator has pushed the daisies. Spent 150 pounds on a new alternator and the problem was resolved.
 
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Pedro called 911-Grizz and said the battery warning light is on! 😀

The new battery voltage was reading 10.7 volts. It seems the alternator was not charging the battery sufficiently.

The Battery seemed fine when it was charged by the charger, which confirmed that the alternator has pushed the daisies. Spent 150 pounds on a new alternator and the problem was resolved.


Waaaayyy tooo QUICK Mr Bolt 🥇 🏆


Well done, collect a candy from the jar in my van and go sit at the back of my classroom. You may read comics for the rest of your lesson today.
 

Attachments

  • IMG_3647.png
    IMG_3647.png
    984.2 KB · Views: 37
  • IMG_3648.jpeg
    IMG_3648.jpeg
    84.1 KB · Views: 37
To avoid these ads, REGISTER NOW!

Finallygotit

ALLIANCE MEMBER
Joined
Jul 6, 2013
Messages
4,103
Location
Tucson, AZ
Pedro called 911-Grizz and said the battery warning light is on! 😀

The new battery voltage was reading 10.7 volts. It seems the alternator was not charging the battery sufficiently.

The Battery seemed fine when it was charged by the charger, which confirmed that the alternator has pushed the daisies. Spent 150 pounds on a new alternator and the problem was resolved.
:+1:

:beer:
 
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Pedro called 911-Grizz and said the battery warning light is on! 😀

The new battery voltage was reading 10.7 volts. It seems the alternator was not charging the battery sufficiently.

The Battery seemed fine when it was charged by the charger, which confirmed that the alternator has pushed the daisies. Spent 150 pounds on a new alternator and the problem was resolved.


Story:

5.30pm
Dark-0-Clock
Pedro texts: “ xxxxxx “
Not kisses - See screenshot. Read the exchange.
So I gather jumper leads, towing straps (provided by pavement gods) and drive 5 miles to find him, car and 6 guys in orange hi-viz outfits obstructing a roadside street corner.
Car starts again, we drive 500 meters, cuts out, so we connect strap and I two him home.
Push car up onto my driveway in the dark.
Try various diagnostics suggested by my team of remote consultant mechanics who are on 24 hour call out. (Thank goodness for karma)
Tell Pedro to calm down to a mild panic because it’s-2’C by now, roads are gritted, as are my teeth.
Now Pedro has to go back on site at 8.30pm six nights a week to fill the diesel tanks on the industrial heaters that are drying the concrete sections for the HS2 project.
So I take him back on site 7 miles away at 8.30 and we get back at 9.30
Pedro still stressing, so I tell him to go have dinner (Spanish you know, late night dinners) and that I will take him to work at 6.30am and collect at 5.00pm.
****** freezing.
By 11.00am I have tested the alternator as well, zero charge, and then gone to see Cliff, described the problem and been told to charge battery and bring the car in 2-3 hours
Deliver car by 2.00pm
Cliff returns it by 4.40pm as I am leaving to collect Pedro, so I drop Cliff off at his garage and go collect Pedro.
Like a kid on Christmas when we get back and he sees his Fiesta on the drive.
New alternator £93.00 plus 20% VAT
Fitted and car returned same afternoon, £150.00 total.
I asked Cliff if he was sure on price, his reply: “You told me ‘Life is Good’ I guess it is”

Sometimes You just realise, Life is Good.


Happy Pedro.
Happy me.

Last night, like a magpie bringing gifts, he brought me three cable ties and two screws he picked up on site.
 

Attachments

  • IMG_8670.jpeg
    IMG_8670.jpeg
    201.5 KB · Views: 35
  • IMG_3643.jpeg
    IMG_3643.jpeg
    827.4 KB · Views: 51
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
.


Anyone reading this thread got an OBS Chevy 4.3 V6 Silverado stepside truck, of early 90’s vintage?



Tell me in as many words as you need why I should not buy one with around 80k miles (no idea if it has been clocked)

Or of course you could always advise me to go buy it already.

It would replace the Astro as only one bay in the (UN)stables.


Thank you.


.
 

gman007

Well-known member
Joined
May 17, 2017
Messages
2,757
Location
West Michigan
Story:

5.30pm
Dark-0-Clock
Pedro texts: “ xxxxxx “
Not kisses - See screenshot. Read the exchange.
So I gather jumper leads, towing straps (provided by pavement gods) and drive 5 miles to find him, car and 6 guys in orange hi-viz outfits obstructing a roadside street corner.
Car starts again, we drive 500 meters, cuts out, so we connect strap and I two him home.
Push car up onto my driveway in the dark.
Try various diagnostics suggested by my team of remote consultant mechanics who are on 24 hour call out. (Thank goodness for karma)
Tell Pedro to calm down to a mild panic because it’s-2’C by now, roads are gritted, as are my teeth.
Now Pedro has to go back on site at 8.30pm six nights a week to fill the diesel tanks on the industrial heaters that are drying the concrete sections for the HS2 project.
So I take him back on site 7 miles away at 8.30 and we get back at 9.30
Pedro still stressing, so I tell him to go have dinner (Spanish you know, late night dinners) and that I will take him to work at 6.30am and collect at 5.00pm.
****** freezing.
By 11.00am I have tested the alternator as well, zero charge, and then gone to see Cliff, described the problem and been told to charge battery and bring the car in 2-3 hours
Deliver car by 2.00pm
Cliff returns it by 4.40pm as I am leaving to collect Pedro, so I drop Cliff off at his garage and go collect Pedro.
Like a kid on Christmas when we get back and he sees his Fiesta on the drive.
New alternator £93.00 plus 20% VAT
Fitted and car returned same afternoon, £150.00 total.
I asked Cliff if he was sure on price, his reply: “You told me ‘Life is Good’ I guess it is”

Sometimes You just realise, Life is Good.


Happy Pedro.
Happy me.

Last night, like a magpie bringing gifts, he brought me three cable ties and two screws he picked up on site.
Pedro reminds me of Manuel in the old British comedy Fwalty Towers!:)

“I say to Mrs Fwalty, Mr. Fawlty try watch naked girl in the room and Mrs Fawlty go crazy crazy! I don’t know why she go crazy crazy?” 😀

 
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
.


Anyone reading this thread got an OBS Chevy 4.3 V6 Silverado stepside truck, of early 90’s vintage?



Tell me in as many words as you need why I should not buy one with around 80k miles (no idea if it has been clocked)

Or of course you could always advise me to go buy it already.

It would replace the Astro as only one bay in the (UN)stables.


Thank you.


.

Pics
 

Attachments

  • IMG_3627.png
    IMG_3627.png
    195.7 KB · Views: 36
  • IMG_3628.jpeg
    IMG_3628.jpeg
    267.4 KB · Views: 34
  • IMG_3629.jpeg
    IMG_3629.jpeg
    330.7 KB · Views: 35
  • IMG_3630.jpeg
    IMG_3630.jpeg
    327.6 KB · Views: 37
  • IMG_3631.jpeg
    IMG_3631.jpeg
    318.8 KB · Views: 36
  • IMG_3632.jpeg
    IMG_3632.jpeg
    490.6 KB · Views: 38
  • IMG_8671.png
    IMG_8671.png
    151.5 KB · Views: 38
  • IMG_8672.jpeg
    IMG_8672.jpeg
    236.9 KB · Views: 35
  • IMG_8673.jpeg
    IMG_8673.jpeg
    130.3 KB · Views: 30
  • IMG_8674.jpeg
    IMG_8674.jpeg
    241.9 KB · Views: 36

Finallygotit

ALLIANCE MEMBER
Joined
Jul 6, 2013
Messages
4,103
Location
Tucson, AZ
Well, if it hasn't run in a few years, there's a good chance the whole fuel system will need to be gone through to clean out the varnish. You might be able to see if it starts by dumping some gas in the carb. Hopefully the electrical hasn't been eaten by critters.

Are you into that fuzzy white interior?? Also, what's with the delivery truck in the last pic? Did the driver not put the outrigger in place before loading/unloading? :headscrat

:beer:
 
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Today…..,

I am spray painting insidemy lounge.

You know I have no woman no crime.
Unsupervised and not responsible. Painting some hubcaps indoors.
I have decided to go with the Wicked theme.

Green Hubcaps and Purple body.

I think it will work out if I don’t get arrested .
 

Attachments

  • IMG_8755.jpeg
    IMG_8755.jpeg
    174.2 KB · Views: 36

gman007

Well-known member
Joined
May 17, 2017
Messages
2,757
Location
West Michigan
Today…..,

I am spray painting insidemy lounge.

You know I have no woman no crime.
Unsupervised and not responsible. Painting some hubcaps indoors.
I have decided to go with the Wicked theme.

Green Hubcaps and Purple body.

I think it will work out if I don’t get arrested .
Spray painting inside, having a woman or not, is probably not a great idea.

Have you considered taking the pieces that you want to spray paint (I am assuming the C10 panels) inside for a few hours and letting them to warm up. Then taking them one by one outside, with a heater nearby, spray painting them and the.n taking them inside again to let cure and dry.

Even though you still have to bare the smell and vapor of drying paint inside, it still should help reduce the amount vapor floating in the air as well as prevent paint vapor sticking to carpet, furniture, walls etc etc inside!
 
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Spray painting inside, having a woman or not, is probably not a great idea.

Have you considered taking the pieces that you want to spray paint (I am assuming the C10 panels) inside for a few hours and letting them to warm up. Then taking them one by one outside, with a heater nearby, spray painting them and the.n taking them inside again to let cure and dry.

Even though you still have to bare the smell and vapor of drying paint inside, it still should help reduce the amount vapor floating in the air as well as prevent paint vapor sticking to carpet, furniture, walls etc etc inside!

Pedro went up to siesta before I started

And now I have cleaned out.

He won’t know what hit him.

If he wakes up 😂
 
OP
G

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,069
Location
Rochester, KENT. UK
Those who have been paying attention here will know that there is no romantic connection between Sarah (the widow) and me.
However, I do enjoy her company and the fact that she gets on with life and makes me laugh, and she seems to get both my sense of humour and is always ready to kick me in the ribs. This is a significant compliment in my world.

She essentially adopted her late husband’s grown up sons and grandchildren, so looks out for them.

Recently she asked me to keep an eye out for a used lawnmower for her.

I am a great fan of £50.00 mowers, though that benchmark seems to have moved up to £80.00 for the Mountfield mowers I like. The older ones come with a Briggs and Stratton “EasyStart” motor.

So I kept looking, a few of the £50-80 mowers I messaged about were sold fast.

Then this snotter came up……

One terrible photo and a spectacular description.

So I messaged the seller and fetched it at 09.00 yesterday morning about 30 minutes from home.

Started it on the sidewalk, put it in the car.
Came home, cleaned it’s chassis and grass box.
Managed to let some oil and fuel end on the floor.

I think neglect, not over use was this mowers problem.

Then I had coffee and a donut (Thanks Pedro)


Part 2 later.


Off to fetch an adult sized push scooter now.

.
 

Attachments

  • IMG_8723.jpeg
    IMG_8723.jpeg
    1.7 MB · Views: 38
  • IMG_8722.jpeg
    IMG_8722.jpeg
    1.8 MB · Views: 37
  • IMG_3701.jpeg
    IMG_3701.jpeg
    1 MB · Views: 37
  • IMG_3698.jpeg
    IMG_3698.jpeg
    783.8 KB · Views: 39
  • IMG_3697.jpeg
    IMG_3697.jpeg
    498.7 KB · Views: 38
  • IMG_8724.jpeg
    IMG_8724.jpeg
    926.9 KB · Views: 38
  • IMG_8729.jpeg
    IMG_8729.jpeg
    661.3 KB · Views: 38
  • IMG_8731.jpeg
    IMG_8731.jpeg
    650.4 KB · Views: 37
  • IMG_8734.jpeg
    IMG_8734.jpeg
    794 KB · Views: 38
  • IMG_8732.jpeg
    IMG_8732.jpeg
    705.5 KB · Views: 38
To avoid these ads, REGISTER NOW!
Top Bottom