Age of Dunlap drill press?

[pwhittle]

Visiting a friend and he has an old Dunlap drill press. He said he did not know how old it is. I said I would ask the collective information experts at GJ

Thanks for your input!

paul

 

[JoCoSawdust]

Offered in the 42 and 43 catalogs. Made by Double A Products in Michigan. Very cool machine!

 

[JoCoSawdust]

I'm currently refurbishing one of those right now pwittle. The machine is done, finishing up the motor now. Haven't updated the thread in a while.

Dunlap 109.0301 Mohawk Drill Press Rebuild

While I've rebuilt a lot of old machinery, I've yet to post a "build thread". I generally have at least 147 projects going on at one time and don't generally stop to take pictures other than those to remind me how to put something back together. I'm posting this build as it pertains to a bit of...

www.garagejournal.com

 

[pwhittle]

Thanks JoCo,

This drill press is in regular use.

Can I get you any photos for comparison purposes?

paul

 

[JoCoSawdust]

Thanks Paul but I've about got it wrapped up. Glad to know they're still out there earning their keep.

 

[BumpyBoogans]

Finally got around to this one. Juat drilled a nice clean hole

 

[BumpyBoogans]

Anyone have an idea what the pulleys rpm speeds would be?

 

[FrankLee]

Anyone have an idea what the pulleys rpm speeds would be?

chuck speed calculator:

Craftsman Drill Press

Glad you got it figured out. If you can swing it, I highly recommend an adjustable belt. They run very nicely.... quiet and they go around that smallest pulley very smoothly. If you get the 5 footer from HF, you'll have enough for both belts and a few inches extra...

www.garagejournal.com

 

[pwhittle]

My friend lost his in a garage fire.

I have found one that is largely complete but missing the splined pulley and end stop on the top of the spline.

Any idea where I might be able to source one?

 

[pwhittle]

I found one like my friend had and did a preliminary clean up on it.

I also got the Westinghouse 1/6HP motor and the 1/2”-24 drill chuck working.

I am in the lookout for a pair of the pulleys.

Thanks to Frank for answering so many questions and the good folks at OWWM that helped with the motor wiring.



Paul