Crabman
Well-known member
Got it done 35827
Thank you Jori and HJE team!
Thank you Jori and HJE team!
Harry J Epstein Day 2026
- Thread starter NUTTSGT
- Start date
Wow! This could be roughly 700 orders since the other night! I expect my artwork requests to get done by Labor Day.
It’s about ready to be 701. Just thought about topping off all my drill indexes.
Just need to hit the pole barn and then the garage and make a list. Might as well get it done.
Yep! Glad mine was within the first ~75 orders!
RTM
Well-known member
And some of us are queuing up a second order soon, things I forgot or saw in other carts. One non-USA item slipped in.
Order #35886
Order #35886
|
Last edited:
Forgot to mention I won't be posting my box art anytime soon since my order will be shipped via boat across the Atlantic. It feels a little like missing Christmas as I see all the posts but have to wait a few weeks to open my "HJE gifts".
Caleb T
Well-known member
Order #35884 in! There were so many things I wanted, but had to be "reasonable" right now. 
I got a 24mm Wright wrench to try out for alignments at work. If I like it as much as I think I will, a set may be in my future.
I've forgotten or missed out for years, and finally was able to participate. Got a few things for work, and multiple pairs of the 250 AE pliers for myself and gifts! My friend that I introduced to HJE earlier this year is on a family trip, and was able to stop in to the store a few days ago!! I'll admit I'm very jealous, but also excited to hear about it.
I got a 24mm Wright wrench to try out for alignments at work. If I like it as much as I think I will, a set may be in my future.
I've forgotten or missed out for years, and finally was able to participate. Got a few things for work, and multiple pairs of the 250 AE pliers for myself and gifts! My friend that I introduced to HJE earlier this year is on a family trip, and was able to stop in to the store a few days ago!! I'll admit I'm very jealous, but also excited to hear about it.
Order in, almost missed it. Made a small order but glad to participate again this year.
Just a thought...I know it's probably not the best timing...but February 11th is Japan's founding day, and with all the Japanese tools on HJE it may make for a great new Epstein-San Day supporting all the interesting and unique tool makers there.
Just a thought...I know it's probably not the best timing...but February 11th is Japan's founding day, and with all the Japanese tools on HJE it may make for a great new Epstein-San Day supporting all the interesting and unique tool makers there.
ptabatcher
Well-known member
futzed around with my cart all weekend. Could have used the eco fork to level a new range tonight.
Order #35898
Order #35898
Placed on July 5, 2026 at 6:21 pmOrder #35898
| PRODUCT | SKU | PRICE | QUANTITY | TOTAL |
|---|---|---|---|---|
| Top Short Eco Fork 4 1/2" (117mm) Adjustable Wrench (HY-26STR) | HY-26STR | $20.00 | 1 | $20.00 |
| $5 Mystery Box | MYSTERY | $5.00 | 1 | $5.00 |
| IPS Diamond Vise Mini 135mm (DVM-135) | DVM-135 | $27.95 | 1 | $27.95 |
| 10 pc Norseman USA Left Hand Screw Machine & Square Extractor Set (BR-10SQ) | BR-10SQ | $50.65 | 1 | $50.65 |
| 250th Anniversary HJE 10" Pliers (Made in the ol' USA) #1776 | 1776 | $15.00 | 1 | $15.00 |
Dexter-Russell 6" x 3" Bench Scraper (Second) (S196)
| S196 | Regular price | 1 | Regular price |
| TOP Stubby Coin Screwdriver w/ Rounded Tip (TRD-45) | TRD-45 | $9.65 | 1 | $9.65 |
| Subtotal | $131.25 | |||
| Shipping (Ground Advantage) | $9.06 | |||
| Total | $140.31 USD |
four.cycle
Well-known member
I somehow manage to miss this every year.
It’s still on!
We heard a noise when you walked but didn't know what to say.
(I've got 3 Koken universal/CV joints like that, and they're great, and I hope I never reallly need them, but when I do, you know.)
senlow
Well-known member
Order 35909 has been placed!
A huge thanks to Jori and team!!!
A huge thanks to Jori and team!!!
Ohio Andy
Well-known member
I was #35123 lots of orders this weekend!
NoahG
Well-known member
I had them in my cart, then removed them, while Jori may have liked where my cart total was going, my bank account had other ideas. However, I plan on stopping by in person in about two weeks when I'm in the KC area. I guarantee I will not leave there empty handed.
rpenterics
Well-known member
Just placed Order #35951
kidsmoke
Member
So, to clairfy, does 'through July 6th' mean until midnight central time of the 6th?
jsackin
Well-known member
This old Plomb speeder is amazing I've have a few Snap on's and Proto but this Plomb is my go to. I am super excited for APC mossberg speeder so happy I seen it I was looking at the wright ones when I seen it.
Attachments
2many2s
Active member
Was this year an all time high?
jsackin
Well-known member
oh yeaaaahhhhh
Ohio Andy
Well-known member
In the middle of the chaos I realized that I forgot to add two of these to my order
Felo 19 pc Impact Bit Set PH/SQ/TX w/ Holder (63599)
///brand_for_product_detail=East German Military,close_out=Yes,companydescription=East German Military - Made in Germany,condition=New,condition_google=new,cost=1.500000,countrymade=Made in Germany,featured=0,identifier_exists=0,instock=in...
www.harryepstein.com
And if you have not ordered yet. Just buy a set or two of these. Those things are really stiff but they hold up well....
Second order placed
Last edited:
We'll order #3 with $50 of individual drill bits. This will be the first time in my life all 4 of the indexes I have spread around my shop, pole barn and work truck will be full.
Thankfully most of the needed sizes were less than a 1/4" so they were inexpensive. Also great I was able to top off the numbered sizes.
Now officially tapping out. Literally can't think of anything else I need, already bought stuff I didn't need so that's covered too.
Thankfully most of the needed sizes were less than a 1/4" so they were inexpensive. Also great I was able to top off the numbered sizes.
Now officially tapping out. Literally can't think of anything else I need, already bought stuff I didn't need so that's covered too.
everett464
New member
- Joined
- Jun 9, 2026
- Messages
- 3
That's awesome. I mean...It will be awesome when you're all done...
67CarGuy
Well-known member
After some (now resolved) issues with payment, #36017 is in!
Taps! Do you have enough taps?
Ohio Andy
Well-known member
I opted for this set:
Norseman 40pc. Magnum Super Premium Set Straight Flute Plug Taps & Hex
Norseman 40pc. Magnum Super Premium Set Straight Flute Plug Taps & Hex Dies (35171) Norseman 40pc. Magnum Super Premium Set Straight Flute Plug Taps & Hex Dies (35171) Set contains: Type 24-AG and 27-AG• HSS straight flute taps & HSS hex dies siz
www.harryepstein.com
You might prefer this (35181, SP-40TDI) set rather than the one above (35171, SF-40TDI), because it is better if you are tapping through holes because it continuously ejects the chips ahead of the tap. Although I usually tap through holes, I wanted the one above in case I wanted to tap something that was not a through hole.
Tap & Die Set Spiral Point Hex, M3-M12, .5-1.75 (35170)
Tap & Die Set Spiral Point Hex, M3-M12, .5-1.75 (35170) Tap & Die Set Spiral Point Hex, M3-M12, .5-1.75 (35170) Tap Type Spiral Point Die Shape Hex Smallest Tap Thread Size M3 x 0.5 Largest Tap Thread Size M12 x 1.75
www.harryepstein.com
Did I really need another set? Not really, my Irwin 26376 is actually a larger set, but sometimes I want something smaller to carry around.. or a back-up set.
Note that this set does not contain Metric taps and dies.
Last edited:
Yes, all my tap sets are full and even have duplicates in the package up to 1/4”. I use a lot of small machine screw sizes for work.
Also filled out all my various types of extractors that were missing in the past year and picked up a set of left handed bits I’ve yet to use.
Stop enabling
Jarhead0408
Well-known member
Not even sure my order qualified as a HJE Day purchase, but that's the spirit it was made in.
I bought a Wright 1/4" 6 point socket set in both shallow and deep, another loose socket to go along with it, and a diameter tape measure.
Had to shotgun the order this time around. No box art needed. Thanks again Jori and everyone here for keeping it going.
I bought a Wright 1/4" 6 point socket set in both shallow and deep, another loose socket to go along with it, and a diameter tape measure.
Had to shotgun the order this time around. No box art needed. Thanks again Jori and everyone here for keeping it going.
Last edited:
That diameter tape did tempt me, but I restrained myself!
Jarhead0408
Well-known member
It's one of those tools that I don't see myself using often, but I think when you need it, it would be just the ticket.
jeff1976
New member
Put my order in last night. #35893. I keep seeing more items I wish I had added lol. Better save some for next year I suppose.