parting out my entire CNC machine shop

[benjamin.eby]

Hello some of you here may remember me, I am the guy who did the bionic crowbar and the Triple Lock Socket (www.triplelocksocket.com)

I am now parting out my entire shop to raise money so I can bring the socket to market myself. Some of the larger items include

Clausing Kondia CNC - $10k ( comes with 8 tool holders and vise. rough dimensions are sames as a series 2 bridgeport- has x y and z servos

SBC Lathe - $3k (rather large, 15 x 48 in I think)

Clausing Lathe -$2k (10 x 24 in 5900 series)

Powermatic band saw -$3k ( 12ft blade 19in throat)

Reid Surface Grinder -$3k (6 x 18 with good magnet chuck)

Brown& Sharpe grinder $1500 ( old model with new bearing motor- grinds well comes with an ok magnet chuck)

Cold saw $1k (220v with liquid coolant feed and extra handle)

lincoln cv 400 welder $2k ( comes with extra feed unit, great welder hate to see it go- it's a beast)

Big Joe lift $1k (basically an electric pallet jack that will lift 1000lbs over your head.

Shopsmith table saw $500 (these are collectable, this one needs a new electric cord but has the drill press and lathe attachments- I used it to rough cut plastic.)

I have tons of other stuff in there- measuring calipers for about everything, carbide bits, tool boxes, metal stock chucks and bit holders and bore bars and...... email me if you are looking for anything to with metalworking

ALL PRICES ARE NEGOTIABLE!
my e-mail is [email protected] -email me if you have any questions or would like to come and take a look at something / would like pics
Thanks and have a great christmas everyone -Ben

 

[roktoy]

Location of items?

 

[benjamin.eby]

Sorry should have put that in the post

My shop is in Soldiers Grove, WI 54655 - smaller items I will ship for whatever UPS or Fedex charges,-

there is a trucking company in town- Lee Steyer Trucking, their phone # is
608-624-5990, If you need something larger moved they could probably give the best price since they are close and know my shop already

thanks -Ben

 

[Teken]

Ben,

I wish you the very best in this endeavor . . . I will be signing up for the socket in the next few days to show my support!

Merry Christmas and all the very best in 2011 for this product . . . I also appreciate the sacrifice you made for all of us over seas . . .

 

[padronanniversary]

curious, is the cnc 3 phase ? What is the height of it ? Trying to see if it would fit in my garage

 

[benjamin.eby]

yep it is 220 three phase if I had to guess I would say it is about 8-9 ft high, I can take an actual measurement when this snow storm is over and I can get to the shop- it would easily fit in most garages with a standard height ceiling. Thanks for the interest, if you have any other questions, just ask thanks!

 

[padronanniversary]

how far are you from the twin cities area ?

 

[benjamin.eby]

I am right around 200 miles south, it's a bit under 4 hours for me to get to the twin cities.

http://maps.google.com/maps?hl=en&tab=wl

this should take you to the google maps site with directions

 

[bad daddy]

You need to get on a show like Dragon's Den, or the US equivalent...even if they dont invest, it's the 5-10 minutes of prime time advertising... Then you can keep your toys!

 

[HotRodKush]

Big Idea with Donny Deutch comes to mind too - though I imagine there's a waiting list.

 

[SpeedCoach]

I'd be potentially interested in any measuring tools you have (micrometer, calipers, etc). Plan on putting those up?

 

[benjamin.eby]

yes I have a bunch of stuff like that, what were you looking for specifically?, I have tons of measuring devices, dial indicators, height guages for setting up cnc tooling, etc.

 

[Hamster]

Tempting but can;t afford the CNC myself.

However, best wishes with bringing your triple lock socket to the market. I think it is a very courageous thing to do.

 

[SpeedCoach]

yes I have a bunch of stuff like that, what were you looking for specifically?, I have tons of measuring devices, dial indicators, height guages for setting up cnc tooling, etc.

I'm sort of keeping an eye out for a decent caliper. if a dial indicator came along I'd consider it too. when you have a moment shoot me a PM and let me know what you'd part with. I'm in no rush, so dont go out of your way

 

[Possum]

Are you selling lathe tooling with the lathes or separate?

 

[Ghostrider]

Any vises you are planning on liquidating?

 

[PrecisionMarine]

If you have any Mitutoyo thread mics, I'm interested, particularly 1-2" or 2-3".
Also, interested in accessories for your Clausing 5900-series lathe, if you have anything seperate from the lathe itself.
Thanks

 

[-->]

I don't think you'd have this since your shop is pretty modern, but do you have any anvils? What kind of rolling toolboxes do you have up for grabs?