Sears website says and 3 sockets for $10??

[JB740i]

But I can't figure out how to get that price. Anyone else know?

 

[pl_silverado]

Good question. I just tried and it comes up full price, although it does say additional discounts may apply after you checkout.

Im not a fan of sears anyway.

 

[wilbilt]

ANY 3 sockets? Does that include the $35 S-K swivels?

Where's the fine print?

 

[JB740i]

ANY 3 sockets? Does that include the $35 S-K swivels?

Where's the fine print?

Dunno. That's what I'm trying to figure out. I'll return the 2 1/8 socket I just bought at full price....

 

[jimvannoy]

Sound like another 3 cent pliers lure them in deal.

 

[JB740i]

I've got em on the phone now. She's checking....

 

[rose jackets67]

Just worked for me. Any 3 open stock sockets for $10. I order 3 3/8 drive universals I needed, and the total came to $10 plus tax... picking them up in the store as soon as I can get over there.

 

[JB740i]

Okay, I got the 2 1/8, 2 1/4 and 2/ 3/16" for 10 bucks and 7 to ship em.

I had bought the 2 1/8 last weekend to get the wheel hub nut off my new '76 Land Cruiser. So I can return this one, keep the used one and make money! Good stuff.

 

[JB740i]

Just worked for me. Any 3 open stock sockets for $10. I order 3 3/8 drive universals I needed, and the total came to $10 plus tax... picking them up in the store as soon as I can get over there.

When did the price show up? In the shopping cart?

 

[jimvannoy]

I just tried to order 3/4 drive sockets and the total for 3 came out to over $100.00 in my shopping cart all the way through the checkout process.

 

[TNToy]

I'll return the 2 1/8 socket I just bought at full price....

Somebody's working on a Toyota front axle.

*edit* You mentioned it a couple of posts down... Nevermind...

 

[JB740i]

Somebody's working on a Toyota front axle.

*edit* You mentioned it a couple of posts down... Nevermind...

http://forum.ih8mud.com/showthread.php?t=176303

Check out that rotor!

 

[TNToy]

I've seen worse. When the rotor gets so thin that it snaps off the hub, and you pretty much lose all breaking capability, post up again.

 

[JB740i]

I've seen worse. When the rotor gets so thin that it snaps off the hub, and you pretty much lose all breaking capability, post up again.

Bet you're a helluva fisherman too!

I got new rotors and some reman. calipers of a '92 4Runner. Finished the passenger side last night and will get the drivers side done tonight. Then I get to wire up the Taurus fan and it's ready to drive....so I can figure out what needs to be replaced in the steering so I'm not flying all over the road. Fun stuff

 

[jimvannoy]

Ok what about the sockets? Do you have to go all the way to the end of the checkout process before the price changes to 3 for $10? I want to order a bunch of 3/4 drive sockets.

 

[JB740i]

Just worked for me. Any 3 open stock sockets for $10. I order 3 3/8 drive universals I needed, and the total came to $10 plus tax... picking them up in the store as soon as I can get over there.

Do you mind sharing the model numbers so I can do a test and see if it works for me too?

 

[icnsltmfg]

I just ordered 23 sockets (filled in most of my open / lost sockets) including some of the large 1/2" metric sockets as they were almost $9 but for $3.33 it was not bad. If you spend BEFORE the discount more than $99 on your total tool order you also get free shipping.
Subtotal:
$76.59
Sales Tax:
$9.30
Shipping:
$7.50
Shipping Discount:
$-7.50
Order total:
$85.89
Savings Applied:
$-60.38

 

[PAToyota]

I've seen worse. When the rotor gets so thin that it snaps off the hub, and you pretty much lose all breaking capability, post up again.

Judging by your screen name, I assume that you do realize that it is supposed to look like this:

So he wore through the whole first solid piece and nearly all the way through the webbing between the two solid pieces...

 

[1320stang]

How about a link? I'm not seeing this 3 sockets for $10 deal anywhere on their site.

 

[icnsltmfg]

Go to the main sears site, then go to "Tools" Just above the main picture there is a 3 for $10 promo, however as you add open stock sockets it will begin to take off the discount.
http://www.sears.com/shc/s/BrowseVertical?adCell=AH&storeId=10153&vName=Tools&catalogId=12605

 

[bmwpower]

Goddamnit, what the hell... I can't add anything to my cart. Sonofa...


I think I just crashed the site....

javax.ejb.ObjectNotFoundException
at com.ibm.commerce.user.objects.EJSJDBCPersisterCMPUserBean_dca86644.findByPrimaryKey(EJSJDBCPersisterCMPUserBean_dca86644.java(Compiled Code))
at com.ibm.commerce.user.objects.EJSCMPUserHomeBean_dca86644.findByPrimaryKey(EJSCMPUserHomeBean_dca86644.java(Inlined Compiled Code))
at com.ibm.commerce.user.objects.EJSRemoteCMPUserHome_dca86644.findByPrimaryKey(EJSRemoteCMPUserHome_dca86644.java(Compiled Code))
at com.ibm.commerce.user.objects._UserHome_Stub.findByPrimaryKey(_UserHome_Stub.java(Compiled Code))
at com.ibm.commerce.user.objects.UserAccessBean.instantiateEJB(UserAccessBean.java(Inlined Compiled Code))
at com.ibm.ivj.ejb.runtime.AbstractEntityAccessBean._instantiate(AbstractEntityAccessBean.java(Inlined Compiled Code))
at com.ibm.ivj.ejb.runtime.AbstractEntityAccessBean.refreshCopyHelper(AbstractEntityAccessBean.java(Inlined Compiled Code))
at com.ibm.commerce.user.objects.UserAccessBean.refreshCopyHelper(UserAccessBean.java(Compiled Code))
at com.ibm.ivj.ejb.runtime.AbstractEntityAccessBean.__getCache(AbstractEntityAccessBean.java(Compiled Code))
at com.ibm.commerce.user.objects.UserAccessBean.getLastSession(UserAccessBean.java(Inlined Compiled Code))
at com.ibm.commerce.browseradapter.WCAuthenticationCookie.getSignature(WCAuthenticationCookie.java(Compiled Code))
at com.ibm.commerce.browseradapter.WCAuthenticationCookie.validate(WCAuthenticationCookie.java(Inlined Compiled Code))
at com.ibm.commerce.browseradapter.WCAuthenticationCookie.getUserId(WCAuthenticationCookie.java(Compiled Code))
at com.ibm.commerce.browseradapter.WCSession.validate(WCSession.java(Compiled Code))
at com.ibm.commerce.browseradapter.WCSessionContainer.parseInitialConversationToken(Unknown Source)
at com.ibm.commerce.browseradapter.WCSessionContainer.resolveConversationToken(Unknown Source)
at com.ibm.commerce.browseradapter.AbstractHttpSessionContext.resolveActivityToken(Unknown Source)
at com.ibm.commerce.browseradapter.HttpSessionContext.resolveActivityToken(HttpSessionContext.java(Compiled Code))
at com.ibm.commerce.webcontroller.WebControllerHelper.startRequestProcess(Unknown Source)
at com.ibm.commerce.webcontroller.RuntimeServletFilter.doFilterAction(RuntimeServletFilter.java(Compiled Code))
at com.ibm.commerce.webcontroller.RuntimeServletFilter.access$0(RuntimeServletFilter.java(Inlined Compiled Code))
at com.ibm.commerce.webcontroller.RuntimeServletFilter$1.run(RuntimeServletFilter.java(Inlined Compiled Code))
at com.ibm.commerce.webcontroller.RuntimeServletFilter.doFilter(RuntimeServletFilter.java(Compiled Code))
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java(Compiled Code))
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java(Compiled Code))
at com.shc.ecom.servlet.SNCFilter.doFilter(Unknown Source)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java(Compiled Code))
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java(Compiled Code))
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java(Compiled Code))
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java(Compiled Code))
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java(Compiled Code))
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java(Compiled Code))
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java(Compiled Code))
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java(Compiled Code))
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java(Compiled Code))
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java(Compiled Code))
at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java(Compiled Code))
at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java(Compiled Code))
at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java(Compiled Code))
at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java(Compiled Code))
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java(Compiled Code))

 

[Danglerb]

Yeah, I am REAL sure this is going to go through.


Craftsman 1/4 in. Socket, 6 pt.
Sears item # 00943493000 Mfr.model # 43493

Remove

Update
$0.97 $1.99
While quantities last
Intermediate markdowns may have been taken
$0.97
Buy any 3 open stock sockets for $10


-$2.36


Ship Oversized Delivery Oversized Delivery or Pick Up?
Ship
This item typically leaves our warehouse within 2 business days.

Item Total $-1.39

 

[bmwpower]

I got in...

What size in 3/4 drive should I get???? I know I need a 36mm....what else????

 

[jimvannoy]

I don't get any kind of a price reduction anything I add to my cart stays at the original price all the way to the end of the checkout process.

 

[tanda4]

I got in...

What size in 3/4 drive should I get???? I know I need a 36mm....what else????

What do you use a 36mm for?

 

[bmwpower]

What do you use a 36mm for?

36 mm nut on my 535i crankshaft for starters...

 

[tanda4]

How long does the in-store confirmation take? I want to pick up my new sockets.

 

[Danglerb]

I gave it a shot, 8/10/12/14mm 1/2 flex sockets and 13/16 flex sparkplug, just under $20 with tax.

 

[Danglerb]

I clicked through the sears.com page, as well as searched for a couple of sockets directly like a 27mm for my crank, some worked with 3/$10 and some didn't. I guess its what they decide to call open stock.

Half of what I picked out at first did not show up for in store pickup, and did not have a ship to store option, just normal shipping for $6.25, so I removed all of them and will look back at it later.

 

[bmwpower]

Do Armstrongs count??

 

[jimvannoy]

I just got off the phone with Sears after 45 minutes of the person trying to put my order in and me getting put on hold every 5 minutes they came back and said the sale only applies to sockets that are $7.00 and less despite the web page stating all open stock sockets. I was trying to order some 3/4 drive sockets. They said sorry but somewhere on the web site it states not responsible for errors or something like that.

 

[bmwpower]

Yea, I'm on hold now too.

Just refreshed my cart and it dumped about half my large order in the trash....something about the certain sockets "no longer available for shipment"...WTF....

 

[wilbilt]

Yea, I'm on hold now too.

Just refreshed my cart and it dumped about half my large order in the trash....something about the certain sockets "no longer available for shipment"...WTF....

Sounding more like the 3¢ plier deal...the website says "Buy ANY 3 sockets for $10".

 

[bmwpower]

I guess the mute button ain't working for my sales associate... I keep hearing her saying "this is f'd up!" in the background. A lot of commotion going on at sears.com...I guess they're only getting what they asked for.

 

[wilbilt]

It worked for me on 3 swivel sockets that listed at $8+ each.

BTW, one of my plier orders is still showing as "processing", and my account is still showing the charges.

bmwpower, you need to keep crashing the website...maybe it will get better, LOL....

 

[bmwpower]

MORE BS....... Of the ones they pulled from my cart due to "no longer available for delivery", are a bunch of deep 6 points in metric...when I readd them again to pick them up at the store...They ain't getting discounted.

Sears is backing out of their deal minute byt minute...BS.

 

[jimvannoy]

I tried 3/4 drive sockets it would not discount them, I tried 1/2 deep metric sockets it would not discount them, I tried cushion grip nut drives it would not discount them. Looks like more of their BS to me. I think it will let you buy sockets they already have posted for less than $3.33 for the 3 for $10.00 "one day only sale on any 3 sockets, any 3 nut drivers, any 3 L hex keys. Sears and my definition of "ANY" are obviously different.

 

[eschoendorff]

I hate Sears.

 

[bmwpower]

Aaaahhh. I ended up getting some universal sockets. I don't have any like that. Hopefully I got a good deal. I fell for the "stuff is becoming no longer available...buy now" gimmick.

 

[MAD]

Double check your invoice online. I ordered a bunch of flex sockets. It showed the sale prices all the way through the process. After getting a confirmation number I printed an order summary. It showed everything at full price. Was on hold with customer service for a 1/2 hour while someone tried to fix it- then the phone system dumped my call.