WrightTool1
Active member
n e w s r e l e a s e
Wright Tool’s Popular WrightGrip™ Design is Now Available in Metric Sizes
BARBERTON, OHIO – September 2011 – Wright Tool Company offers WrightGrip™, an innovative, high-strength, anti-slip design on the manufacturer’s open-end style wrenches. The design is now available on Wright Tool open-end and combination wrenches in a range of metric sizes from
7 millimeters to 24 millimeters.
The WrightGrip feature of the new metric-sized wrenches ensures that the open-end wrench fits more snugly on the fastener, preventing the jaws from spreading and keeping the wrench from slipping. WrightGrip has up to 50 percent more strength than traditional Wright open-end wrenches, and is up to 80 percent stronger than comparable competitors’ wrenches.
The design incorporates a series of strategically placed teeth or grooves on the insides of the wrench’s two jaws. These teeth allow for a better seating of the wrench on a fastener. One fastener corner locks into the groove so the fastener won’t slip or twist out of the wrench under load.
The WrightGrip design also includes a slight enlargement of the wrench opening’s back end. The additional metal in this high-stress area helps to stiffen the wrench jaws, thus decreasing the chance of their spreading under heavy loads. In addition, the shape of the wrench’s back end is modified. The modified U-shape design further reduces stress and improves performance.
Traditional open-end wrench designs sometimes allow a fastener to pivot about one of its outer corners, thus causing the fastener to move outward. The result is that the fastener makes contact further out on the wrench which can cause the jaws to spread. Tests have shown that this spreading, along with the corners of the wrench being flattened, can result in the wrench slipping over the fastener corners.
“As distribution has become more global, the demand for the metric sizes has grown,” said Ty Smith, director of business development for Wright Tool. “When our customers asked for WrightGrip in metric sizes, we listened and added metric sizes to our product line.”
Wright Tool manufactures a complete line of more than 4,000 professional-grade hand tools for the industrial, contractor, and MRO markets. All Wright-manufactured products are U.S. made and carry lifetime guarantees against defects in workmanship. The company is committed to perfecting performance. Wright Tool is located at One Wright Drive, P.O. Box 512, Barberton, OH 44203. Phone: 800-321-2902. Fax: 800-543-2095. E-mail: [email protected]. Web site: www.wrighttool.com.
# # #
Wright Tool’s Popular WrightGrip™ Design is Now Available in Metric Sizes
BARBERTON, OHIO – September 2011 – Wright Tool Company offers WrightGrip™, an innovative, high-strength, anti-slip design on the manufacturer’s open-end style wrenches. The design is now available on Wright Tool open-end and combination wrenches in a range of metric sizes from
7 millimeters to 24 millimeters.
The WrightGrip feature of the new metric-sized wrenches ensures that the open-end wrench fits more snugly on the fastener, preventing the jaws from spreading and keeping the wrench from slipping. WrightGrip has up to 50 percent more strength than traditional Wright open-end wrenches, and is up to 80 percent stronger than comparable competitors’ wrenches.
The design incorporates a series of strategically placed teeth or grooves on the insides of the wrench’s two jaws. These teeth allow for a better seating of the wrench on a fastener. One fastener corner locks into the groove so the fastener won’t slip or twist out of the wrench under load.
The WrightGrip design also includes a slight enlargement of the wrench opening’s back end. The additional metal in this high-stress area helps to stiffen the wrench jaws, thus decreasing the chance of their spreading under heavy loads. In addition, the shape of the wrench’s back end is modified. The modified U-shape design further reduces stress and improves performance.
Traditional open-end wrench designs sometimes allow a fastener to pivot about one of its outer corners, thus causing the fastener to move outward. The result is that the fastener makes contact further out on the wrench which can cause the jaws to spread. Tests have shown that this spreading, along with the corners of the wrench being flattened, can result in the wrench slipping over the fastener corners.
“As distribution has become more global, the demand for the metric sizes has grown,” said Ty Smith, director of business development for Wright Tool. “When our customers asked for WrightGrip in metric sizes, we listened and added metric sizes to our product line.”
Wright Tool manufactures a complete line of more than 4,000 professional-grade hand tools for the industrial, contractor, and MRO markets. All Wright-manufactured products are U.S. made and carry lifetime guarantees against defects in workmanship. The company is committed to perfecting performance. Wright Tool is located at One Wright Drive, P.O. Box 512, Barberton, OH 44203. Phone: 800-321-2902. Fax: 800-543-2095. E-mail: [email protected]. Web site: www.wrighttool.com.
# # #
