To avoid these ads, REGISTER NOW!

Looking for older Makita cordless tools

N

NinetyTwoFifty

Banned
Joined
Jan 11, 2011
Messages
7,036
Location
Winchestertonfieldville, Ga
EDIT: OK, I'm going to be a little more specific here with my wants.

Here's what I already have:

4 7.2v drills

2 9.6v drills that use the stick type batteries

2 7.2v flashlights

1 14.4v drill

1 14.4v work light

------------------------------------------------------------------------------------------

And here's what I need:

jigsaw, 7.2v or 9.6v

7.2v sander

right angle drill, 7.2v or 9,6v

14.4v drill, preferably a 6236D

Thanks for looking!
 
Last edited:
To avoid these ads, REGISTER NOW!
S

Syndicate

Banned
Joined
Aug 10, 2011
Messages
1,229
I has a 14.4 volt with light and drill, 2 batteries, charger and a case. Give me a coupla seconds or minutes and I edit post with pics. I got myself a new 18volt impact driver and drill set fer christmas to me :)
 
Last edited:
OP
N

NinetyTwoFifty

Banned
Joined
Jan 11, 2011
Messages
7,036
Location
Winchestertonfieldville, Ga
First of all, those new ones look pretty sweet!


And the other looks pretty good too. Are the batteries ni-cd or ni-mh, and do they still hold a good charge? And that's not the original charger is it?

And, this might be important. How much?
 
S

Syndicate

Banned
Joined
Aug 10, 2011
Messages
1,229
Thanks they are a cool set. Home depot had them on sale so I had to do it. Besides my christmas shopping was all done at that time.

The other set is 2 years old to me. I purchased it for 90 at a pawn shop. So I am not sure if it is the original charger or not. The charger is faded in color because I left it on the deck when I was building it. I was by myself and was tired runnin back into house for recharge.
The batteries say Ni-MH Rechargable Nickel-Metal Hydride Battery. This is straight from the label.
Yes they hold charges well. I used it for a 20 X 10 deck, hanging doors and adjusting cabinets in the house. As far as price I dunno, I reckon I would like to get bout 50 giv er take, I think it would be about 15-20 fed ex. You can always make an offer, been in my closet since christmas..
 
To avoid these ads, REGISTER NOW!
J

junk4dummies

Banned
Joined
Feb 15, 2012
Messages
224
Location
Redlands California
I have 2 9.6v drills. One is a key chuck They have working batteries and charger
I also have a the same drill in a metal box with 2 battries and charger.
PM if you could use them. I am the only owner. I have not used them in a long time. I keep the battries charged and they do work. There is a battery site I found that sells good generic ones cheap.

I also have a 6.2 grinder that works great. I have the battery and charger for this one as well. I have other tools but not sure what they are after 20 years. They are in boxes on the top shelf. I need to clean things out.
PM me with any request.
 
OP
N

NinetyTwoFifty

Banned
Joined
Jan 11, 2011
Messages
7,036
Location
Winchestertonfieldville, Ga
Alright, I'm going to suspend my Makita search for now. I already have several things coming in.

I've gotten a couple of PMs with offers of items that I already have now, so I don't want to waste anyone's time. :beer:

If I need anything else, I'll come up with a new ad. Thanks everyone!
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom