Who makes the very best Torx screwdrivers?

[adrian44]

So far I've owned cheap ones that did not last long, and I'm finally buying something nice to serve me for as long as I need them. I made some research and found this super nice set

http://www.tradesmanschoice.com/catalog/Stahlwille/4694.html

In your experience, is this the best money can buy, or is there any other similar set that you think is superior in terms of quality and longevity and finish quality? Price is not an issue.

Thanks

 

[Ed_EOD]

I would think any of the top German/Swiss/USA brands would serve you well.

I have PB Swiss, but if I was using them constantly, I'd get Snap-on for ease of warranty.

 

[darkzero]

My preferences in no particular order.


http://www.wihatools.com/300seri/362serSF.htm

http://www.wihatools.com/500seri/527serie.htm

http://www.witte-werkzeuge.de/index.php?con_kat=69&con_lang=3&sid=qca71lnohbblqps4oces9elmj7


At work I have the Wihas & like them alot. At home & at my previous job as a mechanic I own Matco branded Wittes (just screwdrivers, no Torx) & just recently upgraded to a new Matco set since I like them so much.


My old beat up ones (lost some), tips never wore out:

My new complete set:

 

[Danglerb]

I typically use a bit or bit socket for Torx. Everything I've tried has worked OK as long as I can (with amount of muscle I have) put the needed torque on it, hence much more often a bit or bit socket with a ratchet.

How are the ones you use now failing you?

 

[Trucky]

Anything from the usual german brands (Wiha, Witte, etc.) or Bondhus will do you just fine. Even with repeated and hard use, those brands tools should last a darn long time. I like Bondhus for price and COO, but the German brands produce good stuff too.

 

[Robbie UK]

For Torx drivers it really is best to stick with the German brands. They all seem to have tips made from unobtainium so pick the brand that feels the most comfy in your hand or in a colour you like.

For me the Wera brand was the best as I like the grips whilst the guys I work with hate them - so they stay in my toolbox!

 

[el tanque prohibido]

PB Swiss with the SwissGrip handles are the best.

 

[adrian44]

How are the ones you use now failing you?

I keep buying those $10 sets that are not marked but I'm told they are Taiwanese. The tips on them deform after a while so that if any torque is applied on the screw, the screwdriver's head would just spin inside the screw's head.

 

[MattPersman]

+1 for the matco Witte, but I would not hesitate trying these for 30 bucks http://www.amazon.com/dp/B0009QX20A/?tag=atomicindus08-20

 

[Robbie UK]

At that price I think even a few of the anti-Wera-handle crowd would be tempted. $30 for a bunch of quality drivers is a steal.

 

[Vinko]

PB Swiss with the SwissGrip handles are the best.

I've got those as well. Super nice. I've also got a set of mini PB Swiss in hard handle at work, a set of Wiha older for smaller jobs, and mixed set of SnapOn hard handles (large and mini) that I've bought over the years. They all seem to do the trick, but the tips on the PB Swiss are great.

 

[Vinko]

+1 for the matco Witte, but I would not hesitate trying these for 30 bucks http://www.amazon.com/dp/B0009QX20A/?tag=atomicindus08-20

says "German engineered" but are they made in Germany? Tempted to get these for an extra set.

 

[billp603]

I keep buying those $10 sets that are not marked but I'm told they are Taiwanese. The tips on them deform after a while so that if any torque is applied on the screw, the screwdriver's head would just spin inside the screw's head.

There's a pretty big jump from a $10 no name set to who makes the very best. For $25-30 you can get a decent US made set without having to spend $150 on a European made or tool truck brand.

 

[jflores]

PB Swiss with the SwissGrip handles are the best.

This.

 

[Lone_Wolf]

What about handles for bits?

t handle:

t grip

Ordinary handle:

Which one has the best grip, handling and feel?
I just take picture from PB swiss tool for examples.

 

[Robbie UK]

A lot of Wera is made in the Czech Republic but quality is just the same.

 

[kissmeimgerman]

Pb swissgrip

 

[whelenfan]

i've got some snap-on hard handles and the tops are pretty decent and the craftsman are alright, although the tips don't seem to be as sturdy. I have a tough time finding used smaller size drivers so I usually use bits for those jobs. (bit set is taiwan-coo).

 

[bcradio]

What about handles for bits?

I'd get one of these if you prefer ratcheting:

 

[nexum1919]

I'd recommend these:
Bondhus 33834 Set of 8 Tamper Resistant Stardriver Tools, sizes T9-T40
http://www.amazon.com/dp/B000E7VJFY/?tag=atomicindus08-20

 

[GSMotorrad]

I just picked up these Hard Handled ones from Wiha, made in Germany. They're supposed to arrive today:

http://www.amazon.com/gp/product/B000F0EJXE/?tag=atomicindus08-20

 

[bsaint]

Matco labelled Witte screwdrivers.

 

[Hawk321]

FELO, WERA, WIHA, WITTE, PB SWISS and Snap On...less makes no sense

 

[Steve_P]

I have a zillion wiha drivers and bits of all styles and have to say that the tips are always perfectly machined, they hold up well, and the price is reasonable.

http://www.amazon.com/dp/B000LNH7GG/?tag=atomicindus08-20

 

[MrMark]

I just picked up these Hard Handled ones from Wiha, made in Germany. They're supposed to arrive today:

http://www.amazon.com/gp/product/B000F0EJXE/?tag=atomicindus08-20

I've had those since when they were made in West Germany. I feel they are the best. Over all these years they are still like new.

 

[Danglerb]

If I need to apply real torque I am using a ratchet, or an impact with a bit or bit socket. Those kidney shaped grips are pretty nice for a bit of extra force, but don't spin as well as a swivel head ratchet, or deliver as much torque.

 

[moop187]

sunflag extra long and regular, are by far the best ive ever used.
http://www.garagejournal.com/forum/showthread.php?t=28952&page=351

 

[Monte]

I made some research and found this super nice set

http://www.tradesmanschoice.com/catalog/Stahlwille/4694.html

These should work just fine since they´re made by Witte

says "German engineered" but are they made in Germany? Tempted to get these for an extra set.

made in czech republic

 

[wreckerman5357]

Torx is a Snap-On only tool for me. They make the only Torx tools I have seen that stand up to pro use for any period of time.

 

[decaf]

Weras Torx with HF (holding function) are the best....
Particularly when its tight.......

 

[Moose-LandTran]

Torx is a Snap-On only tool for me. They make the only Torx tools I have seen that stand up to pro use for any period of time.

They're Torx socket drivers are very good, but i've found their Torx screwdrivers leave a lot to be desired. My Wiha ones are by far the best i've ever used.

 

[adrian44]

These should work just fine since they´re made by Witte

Thanks for the tip! Appreciated

 

[richfinn]

I,ve got Facom Torx drivers. Dirt cheap to buy and good quality. I think I paid £20 for them a couple of days after I stopped laughing at the Snap On dealer

 

[shoturtle]

I have wiha and wera, and they are both excellent. Had PB, nice but not better then the wiha or wera. If you want a stainless steel set, the wera made in the czech republic are excellent.

 

[needmoretools]

Have Wera, and like them.

 

[mkstuls]

What about Facom, Witte, Gedore and Toptul torx screwdrivers?
Which is best from someone that have used one of above brands?

 

[theoldwizard1]

For under T10, you can not beat Wiha !

 

[Dave455]

I think I've tried most of them, and PB Swiss are without doubt the best! Best steel, best made, most durable, the lot!

Snap On are pretty close. Snap on are also one of the few makers that don't put stupidly small handles on the smaller sizes! I know that the small sizes can't take a lot of torque, but my hand doesn't get smaller just because I'm using a T10!

Wiha, wera and the suchlike are all fine, I have a set of the Wiha in my 'go bag' and they are good 'workshop grade', but I have some old Wiha stuff. It's lasted really well and no complaints, but it hasn't lasted as well as the PB Swiss!

 

[Applesauce]

Weras have my favourite handles, or SK for traditional acetate. Bondhus are almost certainly the most cost effective, and have pretty decent handles. I can't see how you could go wrong with any of the tips mentioned here...

 

[CanUK]

If you're in the UK, £20 for a 7-piece Wiha set (T10, T15, T20, T25, T30, T40, T45):

http://www.tooled-up.com/manproduct...wdriver-set-with-soft-handles-t10-t45/183449/

Check Quidco for the latest cashback and money-off vouchers as well.