WHOOO- HOOO... two rollers, and a top box!

[jusridin]

I saw this on cl a few weeks ago and blew it off, but I seen the proto box in red the other day in a post and thought what the hell I am goin for it, GLAD I did!
The listing was for a herbrand roller with its contents for a hundred bucks, asked him to send pics of the drawers and he sent six pics of different drawers... so I told him I would see him in 30 min.
got there and wasnt sure what I was lookin at as far as the tools go, he got the box from some old ford repairman, and you will see later as to what I mean as not sure what I am lookin at in the WTF is this thread.
told him I would go sixty five and he agreed, went to load them up and saw another roller in a leaning barn (the craftsman) so I asked him what he wanted for it.... he said 10 bucks.
gave him 75 and we loaded them

 

[930dreamer]

Let me be the first to say, you ****.

 

[jabberwoki]

My thoughts exactly just for the Herbrand box alone!
I must have nice pics of that box asap!!!!

Crikey i just had a close up look at the tools WOW i`d love to dig through that lot!

 

[jusridin]

Let me be the first to say, you ****.

Noted any one seen those snap on tools before? they say snap on tools & co?

 

[jusridin]

I will wash her up a touch and post some good pics of her tomorrow, the paint is in great shape. just a touch of rust where the top box was sitting

 

[98TJ]

Nice, dude.

A little work and you'll have some stuff to brag about for years.

 

[cbacres]

The puller/ball joint seperator is worth that.

Never seen one before, just in my repair books.

Good haul

 

[jusridin]

I will probably do a ton of research even more cleaning and sell it all other than the craftsman circl h and the craftsman roller lol, I really dig learning about all the history, but I cant keep acruing stuff, till I get a big *** shop

 

[jusridin]

The puller/ball joint seperator is worth that.

Never seen one before, just in my repair books.

Good haul

the what?

 

[davesnothere]

You should go back and give him some more money.
You **** a lot.

 

[cbacres]

Your lower left photo.

Has two legs with flats on the inside to hook onto whatever you are pulling.

Has a threaded piece in the middle that goes through a cross bar to hold the legs tight so they don't slip off while pulling.

PM me if your interested in selling.

 

[jusridin]

The puller/ball joint seperator is worth that.

Never seen one before, just in my repair books.

Good haul

that must be in my wtf pile, I have all kinds of little pieces all over so I cant throw any thing away till I know what it is, so far there is alot of kent-moore tools that I dont know that say **** like buick-cad-pont- 37

 

[srmofo]

the u shaped tools are old ford alignment tools. (not the crescent moon wrenches)

The 2 proto doo hickeys in pic 5 appear to possibly be a spark plug chaser. I cant see the business end real well. You insert into hole tighten the first bolt down to expand the chaser, the turn it out.....I think

That big clunky thing in pic 3 is a ridge reamer

I also see a flywheel turner in pic 4 under the puller

great haul!

I would be interested in the alignment tools if you are selling...just pm me


MOAR pics!

 

[jusridin]

Your lower left photo.

Has two legs with flats on the inside to hook onto whatever you are pulling.

Has a threaded piece in the middle that goes through a cross bar to hold the legs tight so they don't slip off while pulling.

PM me if your interested in selling.

ohh the blupoint/ snap-on pile

 

[jusridin]

the u shaped tools are old ford alignment tools. (not the crescent moon wrenches)

The 2 proto doo hickeys in pic 5 appear to possibly be a spark plug chaser. I cant see the business end real well. You insert into hole tighten the first bolt down to expand the chaser, the turn it out.....I think

That big clunky thing in pic 3 is a ridge reamer

I also see a flywheel turner in pic 4 under the puller

great haul!

I would be interested in the alignment tools if you are selling...just pm me

MOAR pics!

As soon as I figure out which ones are allignment tool I will pm you.
Thanks for the responses I look forward to alot more you ***** and other comments in the am, The wife is unhappy I did not spend my birthday with her today lol

 

[930dreamer]

As soon as I figure out which ones are allignment tool I will pm you.
Thanks for the responses I look forward to alot more you ***** and other comments in the am, The wife is unhappy I did not spend my birthday with her today lol

Your in trouble.

 

[jabberwoki]

Well i think you have you priorities in order but then i`m happily single!!
I`m possibly interested in the kent moore stuff once you figure out what it for!

 

[jeffmoss26]

You ****!!!!!

 

[lowbucktruck]

All of that for $75??? What a score!!!

 

[barcalo]

I saw this on cl a few weeks ago and blew it off, but I seen the proto box in red the other day in a post and thought what the hell I am goin for it, GLAD I did!
The listing was for a herbrand roller with its contents for a hundred bucks, asked him to send pics of the drawers and he sent six pics of different drawers... so I told him I would see him in 30 min.
got there and wasnt sure what I was lookin at as far as the tools go, he got the box from some old ford repairman, and you will see later as to what I mean as not sure what I am lookin at in the WTF is this thread.
told him I would go sixty five and he agreed, went to load them up and saw another roller in a leaning barn (the craftsman) so I asked him what he wanted for it.... he said 10 bucks.
gave him 75 and we loaded them

The police must be looking for you! Because you STOLE that stuff lol. Good stuff have fun.

 

[W650Mike]

In pic 42, what is the t-handle with 8pt box wrench used for?

The trammels look like they might be Starrett – the vaccugrip duckbills are cool.

75 bucks. Did you take any candy away from his kids while you were there?

 

[plewlandsbob]

That is a great score!

 

[jusridin]

sorted some of the stuff out today, still not sure what alot of it is though? love that herbrand color

 

[heelsroll]

Amazing Score. Well done!

 

[geologist]

I wonder if the guy you bought all of this from is walking kinda funny today? You certainly stuck it to him. Nice haul!

 

[jusridin]

The guy was very grateful I took it, it was in cl for 3 weeks

 

[jusridin]

Lol, he should have mentioned what tools were inside also with his one pic of the herbrand logo

 

[ckadams00]

Nice!

 

[jim m]

Wow 2 weeks on Craig's list and the first time you saw it you passed. That is a hell of a score and really cool boxes. You definitely ****.


Jim

 

[briandrex]

Extreme suckage bestowed upon you! I love the Herbrand roller and the CMan top. How old is that CMan? They don't make them that way anymore!

 

[jeffmoss26]

I don't recognize a lot of the tools but they certainly look cool!

 

[bluebolt]

sorted some of the stuff out today, still not sure what alot of it is though? love that herbrand color

I love picking up a whole box full of tools and sorting out the unusual stuff.

In pic two the tool with the knob on it in the upper right is for adjusting rocker arms.

In pic four I believe the SUNNEN tool is for installing/removing valve springs on a flathead engine.

And yes YOU ****!

 

[wornoutoldman]

Lots of really nice stuff there...

 

[jusridin]

Thanks for all the you *****
Not sure what year the cman is yet, and the sunken thing works with the snap on things lol(valve spring holders I think)