To avoid these ads, REGISTER NOW!

do you ever do something that makes you feel stooooopid?

COclaw

Member
Joined
Apr 12, 2012
Messages
22
There's a reason all those safety manuals and nonsense say that when using a knife, always cut away from yourself.

Don't ask me how I know.
 
To avoid these ads, REGISTER NOW!

Ivan DeSlayer

Active member
Joined
Aug 3, 2010
Messages
35
Location
Swartz Creek MI
While not entirely a stupid moment it was more a I should've known better moment. I had posted this elsewhere but felt I should share:
Working at a tire store early in my carrier we had this single poster hoist that leaked like a screen door in a submarine. Anywho it had this habit about midway up it would warp to lightspeed from a snails pace and make cars teeter quite a bit when it hit the locks. Well it was my turn in the barrel and thought I knew where the midpoint was on this hoist. Almost brand new Camaro on the hoist for a wheel swap. Below midway up the Camaro goes into warp. Hoist hits the stops but the Camaro, not being strapped down, didn't. Up it comes off the hoist about 8" and slams back down and snaps both front legs off at the bolts on the center pad. Camaro nose dives. At this point it wasn't TO bad but then the lift started to come back down and proceeded to tear out the floorboards and exhaust. All this time the Asian customer cussing/cursing us. I really couldn't control myself when he came out screaming,"Son of *****! Yooooo scroooow up ma caaaaaa." "You icehoe" "You big idriot!"
 

knotttty

Active member
Joined
Aug 5, 2011
Messages
32
Location
Chilliwack B.C.
yup...lol.... a few years ago... I was riding on my buddies tractor ..on the back of course.... holding the dog....

we hit a bump.... she flew in the air.. I reached to grab her,.... we hit the same bump with the rear tires.... and it flung me off the back of the tractor... not to bad.......

except there was a piece of metal rod about 1/4" by 1" sticking up.... when I went back ... I landed on it with my leg... (see picture)..... Yah I felt pretty stupid..... and well over 100 stitches later.... was on the mend....

Roy

View media item 20588
View media item 20589
 

mysta2

Well-known member
Joined
May 9, 2007
Messages
115
Do you mean like when I plumbed my outside water spigot into my hot water line? :dunno:


Ha! That's awesome (in a bad kinda way) just tell people you wanted to be able to wash the car in December.

Had this feeling just last weekend when I put a 17mm (seemed to fit) socket on one of my lug nuts and spun it off before realizing that all my lug nuts are keyed. Came off the wheel fine but man that f***er would not come out of the socket. Had to beat the hell out of it with my biggest hammer before it finally dropped out.
 

Milton Shaw

Well-known member
Joined
Feb 11, 2011
Messages
4,838
I did plumb in hot water and cold water freeze proof faucets on my house. They are very handy to have even cars wash better with warm water in the summer.
 

BFBOB

Well-known member
Joined
Sep 20, 2011
Messages
5,073
Cringe. I remember this one from my machine shop days in '71.
 

Attachments

  • WeddingRing.jpg
    WeddingRing.jpg
    54.4 KB · Views: 185

RECox286

Well-known member
Joined
Apr 11, 2012
Messages
1,399
Location
South Joisey (yeah, that is part of the USA)
Most times when people talk to themselves, especially when they are asking

themself a question, they get the answer that they were looking for.

In my case, I continually get the wrong answers to my questions, or an

answer that has absolutely nothing to do with the original question.

Age, and the increasing lack of head hair, I supose...

Uncle Bob
 

Milton Shaw

Well-known member
Joined
Feb 11, 2011
Messages
4,838
I knew of a guy that cut a toe off in a lawn mower accident. While he was waiting for the 911 response a neighbor's dog came and ate the piece of toe left that he was hoping to get sewed back on.
 

CloseEnough

Well-known member
Joined
Jun 9, 2012
Messages
115
Location
New Jersey
I was making a some-what intricate piece on the lathe today and I put down the piece I was making a replica of somewhere and never found it again.
 

isaac338

Well-known member
Joined
Aug 4, 2007
Messages
727
Location
Halifax, NS, Canada
While not entirely a stupid moment it was more a I should've known better moment. I had posted this elsewhere but felt I should share:
Working at a tire store early in my carrier we had this single poster hoist that leaked like a screen door in a submarine. Anywho it had this habit about midway up it would warp to lightspeed from a snails pace and make cars teeter quite a bit when it hit the locks. Well it was my turn in the barrel and thought I knew where the midpoint was on this hoist. Almost brand new Camaro on the hoist for a wheel swap. Below midway up the Camaro goes into warp. Hoist hits the stops but the Camaro, not being strapped down, didn't. Up it comes off the hoist about 8" and slams back down and snaps both front legs off at the bolts on the center pad. Camaro nose dives. At this point it wasn't TO bad but then the lift started to come back down and proceeded to tear out the floorboards and exhaust. All this time the Asian customer cussing/cursing us. I really couldn't control myself when he came out screaming,"Son of *****! Yooooo scroooow up ma caaaaaa." "You icehoe" "You big idriot!"


That *****, but I hope you didn't in too much trouble for it. Sounds to me like your boss should have replaced that hoist long before that incident.
 

fobar22

New member
Joined
May 30, 2011
Messages
2
When I got my first project car, I was going through and taking off all of the parts I didn't want to keep, one of which was the front suspension and front brakes. It had simple disc brakes which I had done work on with newer cars so I though a few taps from a hammer would brake it free and slide off once I removed the calipers. Well after about an hour of beating it with multiple hammers, and having a ringing in my ear, the brake rotor came off. It had sheared from the cylinder that the wheel bearings are in! Minutes later I found the axle nut which spun off easily and the rest of the rotor fell right off the car. I could only laugh.

Fast forward a few years, first day driving my car, not even 5 miles in, it caught on fire and burned down to the ground without a fire extinguisher in site. It took the fire department 20 minutes to get there.

Lesson learned, get a fire extinguisher, and triple check all fuel lines!
 

Deltarat

Well-known member
Joined
Nov 29, 2006
Messages
341
Cringe. I remember this one from my machine shop days in '71.

My brother-in-law did the same thing on a grease zerk on a turning axle on a combine. I kept telling him not to wear his ring around moving equipment. He said his wife wouldn't let him take it off. Well, it got taken off, along with his finger.
I took mine off when we got back from the honeymoon and never wore it again.
 

1jjpop

Well-known member
Joined
Nov 24, 2009
Messages
481
Location
Central Iowa
A few years ago a car stopped out front of our house , i didn't go out until almost dark told them if it didn't start to leave in our drive over nite . while talking to them ,they come with a small can of gas, so I jump in and pour a little in the carb, about that time gal behind wheel tried to start it.Motor backfired and get me on fire. I rolled like they say to do, fire rolled ahead of me. what saved me a guy got down on his knees and patted me out still got 1 hand and arm burned pretty bad. moral of story I' am not helping people, I healed up so you can't tell it today. I got burned because I was trying to help somebody.
 

Ray-CA

Well-known member
Joined
Jan 6, 2007
Messages
3,451
Location
San Diego CA
You mean like Saturday when I thought that my driveway was 3-inches longer than it is and I backed my truck into the garage door? That kind of stupid?

Ray
 

BigAl62

Well-known member
Joined
Apr 18, 2011
Messages
2,286
Location
suburbs of Chicago
Nearly every day - you'd think over time you'd get over stupid, but you don't.

The other day I was opening a package for a door lock I bought - pulled the utility knife out of my toolbox and proceed to cut right through the package and grazed my finger holding it - real close call.

I did one better - while cutting a piece of carpet with a utility knife and a metal straight edge, I managed to cut the tip of my finger OFF! To this day I have NO feeling on the tip of my left index finger! I chalk it up to extreme stupidity.
 
To avoid these ads, REGISTER NOW!

e-tek

Well-known member
Joined
Dec 19, 2007
Messages
10,690
Location
Saskatoon, SK
in the Line of worst Mistakes ever ....
Several years ago I was about to make an oil change at my Honda Prelude BB1.
The Car was a little too far over the Pit and I needed to reverse it.
Jump in the car, start the motor, only 1 Foot in the car pressing the Clutch.
Let the clutch come, car rolls backwards in a reflex get I lift my foot off the clutch to break and stop the rolling.
You see it comeing.
The Car JUMPS backwards out of the Garage door, the driving side door of my car (still open) hit the Garage Wall. F***.
The most expensive Oil-change ever……
Consequence, in the same year I bought a much bigger Garage door an Lesson learned ALLWAYS get all 2 Feet on the pedals (in a Manuel Car).

TOM

Holy **** I did almost the EXACT same thing!!
Early in the morning, cars need to be taken out of the shop....So I jump in a Falcon to start it before opening the overhead door, one foot on the gas, the other dangling out the open door. A few good pumps, turn the key and the "slush box" slips into "R". The car lurches back so hard it goes THROUGH the wooden OH door and the open car door drags itself across a freshly painted truck next to it. By the time I got my other foot on the Brake (where it should have been), the Falcon was out the door, the door was in pieces in front of me, it and the truck needed repaints and I had 12 guys flying out of the lunch room to witness the dumb-founded look on my face....:eyecrazy:
To this day, OH doors get opened first and my left foot is always firmly on the brake.
 

kald

Well-known member
Joined
Mar 31, 2012
Messages
672
Location
Central Fl
I've honestly done so many stupid things I lucky to be alive!

I was OA welding lead and coworker came over to ask me question I stood up and took my glasses(I actually was using safety gear that day) off with my left hand. The hand holding the welding rod. I talked to him for moment and when I went to put my glasses back on I poked myself in the eye with the lead welding rod.

I will summarize what happend next. An Extended emergency room visit, I feel like a tool when doctor laughs at me, I leave with bandage, see my girlfriend, she laughs and I mistakenly tell her i scratched my retina instead of the cornea. She becomes terrified she is now dating Cyclops but I get some sweet sweet sympathy lovin' nonetheless. When I take my bandage off the next morning and declare my amazement at how it healed overnight she is furious because she thought I was going to blind in one eye. So now I'm a double tard(and no sweet sweet lovin' for a while) because I got my anatomy screwed up in addition to just being a regular idiot for poking my self in my eye.
The morale of that story is, at least get some lovin out of your stupidity and don't wear saftey gear, that **** will kill you.

I've also poked a screw driver all they way threw my hand. I've been shocked and burned more times than can remember, hit my head on forklift forks so many times that I know I have lost precious IQ points, got sulfuric acid in mouth, bleach in eyes, dropped heavy industrial battery cells on my feet, tore knee cartilage getting out of a buddies car after an all you eat BBQ lunch, racked my junk every way possible and got tossed out a boat while under way about 20 miles off shore in squally heavy seas at dusk while I was completely **** faced. Needles I sobered up quick and thank god I had a yellow Steelers t-shirt on. I know forgetting at least 50 other things but that stuff is probably to painful to remember. :)

Edit: On serious note I'm only 41 but I starting to contemplate what act stupidity will finally finally do me in. I hope it's to many ****** when I'm 96 (after the sweet sweet lovin of course). :)
 
Last edited:

Drunken Yak inc

Well-known member
Joined
Sep 4, 2011
Messages
759
Location
Osceola, IN
One of my more recent acts of stupidity was damn near broadcasted on our local news channel....

My grandmother donated some money to her church so they could build a playground for the underprivileged kids in the neighborhood. She calls me at work one day and asks me to volunteer some of my time to help build it. Sure I said, while not being a religious person myself, I can't tell my grandma no and it's not like volunteering is a bad way to spend a few hours of your weekend. So long story short, my girlfriend and I are at the church raking mulch with some huge landscaping rakes and I am so uncomfortable I start to become a little anxious. Why am I uncomfortable?

I'm not a fan of being the center of attention, yet I find myself standing in a playground that carries my last name, surrounded by a bunch of church people who I don't know yet know who I am, and more importantly are my grandma's friends, so I have to be on my best behavior. All the while hoping my pagan girlfriend doesn't get tired of people asking her if she would be interested in joining their church and what not... And then the camera crew shows up... And it's freaking hot outside...

Well, after a short period of time, we all take a break and I'm just standing in the middle of the playground with a big *** rake in my hand... When it slips from my grasp and I try to catch it in the hopes that nobody will see me being a klutz. I put my foot down on the business end and knew instantly that I just screwed up... The aluminum handle made a resounding "ting" as it bounced off my forehead.

I took it like a ******* boss.

No rubbing my head, no rapid blinking, no reaction what so ever. Despite damn near blacking out, I was able to play it off good enough that even my girlfriend had to ask if it actually hit me. I kinda smiled and in a low voice told her how badly that just hurt... And then I look over and see the camera is pointed in my general direction. I couldn't help but laugh.





Then just this very night I was jacking up my car to take the rims off so I can clean them properly. The jack slipped on the front crossmember and ended up bending the **** out of the radiator support member. So I took the bumper off, unbolted the radiator and AC condenser and proceeded to re-bend the crossmember back into its original position. I get it put back together after about two hours of labor only to find out that the hood doesn't shut all the way.

The lower member is connected to the upper member by a vertical brace... The vertical brace and upper member are bent to **** also. It's going to cost me $180 to order those parts from Honda, more if it's out of stock and I'm forced to order online.

Oh well, lesson learned I hope.
 

brianh

Well-known member
Joined
Apr 6, 2010
Messages
1,299
Location
grahamsville NY
Yes yesterday, when I was loading my truck to deliver furniture I just made, while sliding one table on top of the other it went too far and I blew out the back window of my truck.

That safety glass gets everywhere.
 

BD1

Well-known member
Joined
Mar 18, 2007
Messages
4,602
Location
north side
There's a reason all those safety manuals and nonsense say that when using a knife, always cut away from yourself.

Don't ask me how I know.

Yes, and DO NOT try to catch a OPEN razor blade knife as you drop it !:lol_hitti
 

YZ Rider

Well-known member
Joined
Oct 31, 2010
Messages
124
Location
Pennsylvania
Everyone has their days. Felt pretty dumb after changing the oil on a surburban, I grab the ****** dip stick and stop because the oil has a redish tint. Co worker saw me pause and started laughing.
Another one was when I was cutting 25ft 12X12 Flange I beam and had my feet in the drop zone:shocking: Well when it dropped, 10ft of it fell 2ft onto my big toe. That hurt so freaking bad, and of course I kept it to myself. Damn thing is still black.
 

Jason280

Well-known member
Joined
Mar 4, 2012
Messages
3,164
This stuff happens all the time.

I was outside welding a few years ago on a 4x8' trailer, and noticed that things seemed to be getting warmer. Let me rephrase that, things were getting HOT! I looked down, and my pants were on fire. Like YouTube video worthy fire. Luckily, there was a spigot close by...
 

superman09

Well-known member
Joined
Jun 14, 2012
Messages
59
I have too many to list and some I only know about because of what other people who were there tell me. But 2 I will share. Mine is the time I litterally crapped my pants. Was working at a mechanic shop and took over another guys front brake job on a Ram 3500 king cab long bed. I didn't realise he had put a screw jack under the back bumper to help support the truck. I finish up and my boss is digging around in his box at the nose of the truck as I begin to bring it down. All of a sudden the truck starts sliding, I yell at my boss who dives outta the way just as it falls off the front arms. Luckly the front arms got hung up in the step rails and stopped the truck we removed the screw jack and safely lowered the undamaged truck to the ground. My boss didn't come outta the office for the rest of the day and I had to take an extended lunch break to go home and change pants. The second gave me a headache and made my boss feel stupid. We were trying to reinstall a front knuckle on an S-10 after a lower ball joint swap and my boss was prying down in the upper control arm and I was underneath trying to line up the ball joint. Right about the time he put his entire 280 lb body weight on the pry bar the tip slipped and I took a 36" mac prybar to the top of my head. I crumpled to a heap on the floor apparently let out some kinda weird gurgling noise twitched a few times then just stopped. My boss thought he had killed me. Luckly I came to with a really bad headache and suggested we not use that method anymore

sent from my campfire using smoke signals
 

Murphy4570

Well-known member
Joined
Feb 27, 2012
Messages
2,821
Location
West Deptford NJ
Currently moving a door in brick wall inside my house. Just as I start laying the last course of bricks, I notice I happen to have entombed the tools I need to remake the door opening. D'OH!!

Hahhaha!!!!


The thousand injuries of Fortunato I had borne as I best could, but when he ventured upon insult, I vowed revenge.
 

EvilWelder

Well-known member
Joined
Jun 5, 2012
Messages
331
Location
New England
I was fitting up a spool piece of pipe, i had it all tacked up and perfect, only for the other guy I am working with to tell me I had the flanges on backwards.:lol_hitti
 

ArkTinkerer

Well-known member
Joined
Dec 29, 2010
Messages
369
If you never do anything.... You'll never make a mistake.... Its how the public service / civil servants operate!

If you've never done anything stupid, you've never done anything! And that IS stupid!

ArkTinkerer
 

joeswamp

Well-known member
Joined
Jul 25, 2007
Messages
2,418
Location
Massachusetts
Hahhaha!!!!


The thousand injuries of Fortunato I had borne as I best could, but when he ventured upon insult, I vowed revenge.

You know that's based on a true story, right? Happened to an officer in a Boston harbor island fort around 1810 or so, Poe was a sentry there about 20 years later and heard the legend of how the guy disappeared.

Everyone thought the story was urban legend until they were doing some restoration work in the 1920's and found the guy, still dressed in his formal uniform. I believe there were scratch marks on the inside of the wall.
 

jrherald420

Well-known member
Joined
Feb 15, 2011
Messages
538
Location
Louisville,KY
You know that's based on a true story, right? Happened to an officer in a Boston harbor island fort around 1810 or so, Poe was a sentry there about 20 years later and heard the legend of how the guy disappeared.

Everyone thought the story was urban legend until they were doing some restoration work in the 1920's and found the guy, still dressed in his formal uniform. I believe there were scratch marks on the inside of the wall.

Thats kinda interesting, any links to this? I tried Google and nothing came up.
 

racingtadpole

Well-known member
Joined
Dec 3, 2011
Messages
2,029
Location
The far side of crazy.. but sometimes Australia
You know that's based on a true story, right? Happened to an officer in a Boston harbor island fort around 1810 or so, Poe was a sentry there about 20 years later and heard the legend of how the guy disappeared.

Everyone thought the story was urban legend until they were doing some restoration work in the 1920's and found the guy, still dressed in his formal uniform. I believe there were scratch marks on the inside of the wall.

I saw a documentary on the weekend about the making of the first large steel steam powered ocean going ship (whose name currently eludes me). When it was scrapped they found the bodies of two small children that had been sent into the space between the inner and outer skins to help with the rivetting, and then entombed.
 

joeswamp

Well-known member
Joined
Jul 25, 2007
Messages
2,418
Location
Massachusetts
Thats kinda interesting, any links to this? I tried Google and nothing came up.

http://www.examiner.com/article/fort-independence-the-cask-of-amontillado

A photograph was taken of the skeleton found in 1905 (it's in a book I have and it's pretty hard to forget) but I was unable to locate it on the internet.

Apparently this story has some holes though, the worst being that the guy who was supposed to have been killed apparently did not disappear, but allegedly lived until 1846, so it's not clear what exactly happened here.

http://books.google.com/books?id=GJ...eutenant Gustavus Drane captain green&f=false
 
To avoid these ads, REGISTER NOW!
Top Bottom