Was wondering if anyone else got some good numbers from their dealers. Was talking with my guy today about it and he roughly threw out 4400 on a KRL1022 and 5900 on a KRL1023. Said they were really looking to sell boxes, makes me wonder if could get it knocked down any more.
Snap On tool show box deals?
- Thread starter csmitty
- Start date
chris142
Well-known member
that price is less than I was quoted for a scratch and dent klr 1022!
AutoTek
Active member
My SO dealer never throws out deals on toolboxes or tools. I read about deals on this board and I'm amazed at some of the prices SO dealers are selling new boxes for. I don't get it, our old SO dealer who retired was always giving out cash no tax deals on anything and the more you bought the cheaper it always was. He was a SO dealer for over 25yrs......
GeorgiaHybrid
Well-known member
Your dealer went to Vegas.......
Fast LT1
Well-known member
My dealer is pushing two Epiq's for $6500 each.
chadster1
Well-known member
Wait until the black KRL722 with blue trim boxes start showing up on dealers trucks.
Mastermind
Well-known member
your dealer shows up. new shop, SO guy says its not worth driving an extra mile to the bodyshop. Mac man too. matco is the only one that shows, sells something to all 4 of us weekly.
purplezr2
Well-known member
I have the industrial flyer here, it has 68" epiq with power top listed for 6500
supersteve
Well-known member
I have a KRL1023 and Powercab side box on the way, both with stainless tops. My dealer is also giving me a Snappy gift certificate for $675 and a BK5500 video borescope as part of the deal.
I have to give him a totally beatup Waterloo 41" bottom and top box setup and $6750.
$16,000 retail for about $7000. I did okay.
He showed up in the Rock and Rollcab Express truck the day after the Vegas convention so I don't know how much of the deal is from what.
I have to give him a totally beatup Waterloo 41" bottom and top box setup and $6750.
$16,000 retail for about $7000. I did okay.
He showed up in the Rock and Rollcab Express truck the day after the Vegas convention so I don't know how much of the deal is from what.
joe (pa)
Well-known member
I've been chewing on a deal my dealer gave me on a krl1032. $5500. Really like the looong top drawers but still waiting to pull the trigger.
Yea, why I put tool show to kind of segregate from normal deals dealers might throw out for something they might have had a while. Kinda compare and see if there was any wiggle room since he said he could still order but had to let him know soon. On the fence on just finding a used one. But if I could knock some more off the 1023 It'd be the last box i'd ever need for sure. Plus on a truck account would be enticing.
Yea, I'd probably take that deal too! If you don't mind me asking what was he giving you for the waterloo?, wait, nm, by my math skills that looks like 250? Didn't ask what he might give me for my KRA4107.
supersteve
Well-known member
The theoretical value he gave me for the Waterloo was $1000 but that was greatly inflated I think. The whole quote was full of discount this and discount that so it's hard to say. The way I see it, that box would have a hard time getting more than $300 on CL most likely. That's why I broke down my post the way I did: "I'm giving this, I'm getting that". That's what you really have to look at at the end of it all, regardless of numbers games.
GeorgiaHybrid
Well-known member
I remember saying that a side locker, cart and 2 storage cabinets ago.....
SpiderGearsMan
Banned
nobody has money these days
FunkyfullWidth
Well-known member
can we see a copy of that
Haha. Well you do have more toys than I do. But yea your probably right. I was even askin about deals on scanners like the Solus. Which wasn't a smoking one.
purplezr2
Well-known member
Will take a picture tomorrow when I get home.
Well I tracked down my local dealer and he apparently did not go to the show in vegas...
here is what he quoted me..
KRL1032 with stainless top : 10,115
KRA2432 with stainless top : 5,389
I mentioned the Las Vegas deals that other dealers were offering and he told me he would get back to me... he said he would look into what "screaming deals" they have on other boxes. I'm kinda blown away at what he wanted to sell them to me for honestly.. haha
here is what he quoted me..
KRL1032 with stainless top : 10,115
KRA2432 with stainless top : 5,389
I mentioned the Las Vegas deals that other dealers were offering and he told me he would get back to me... he said he would look into what "screaming deals" they have on other boxes. I'm kinda blown away at what he wanted to sell them to me for honestly.. haha
chickenhauler
Well-known member
I've been mulling this over, what would be the consensus be to a great deal that I shouldn't pass up?
KRL1018PJJ DOCKER LOCK EXTREME GREEN 0 * $2,260.00
KRL1012BPJJ LKR, EXT GREEN W/BRIGHT 0 * $3,095.00
KRL1023CPJJ 3BK RC W/2 FW DRWRS EXTGREEN 0 * $10,800.00
========
Retail $16,155.00
KRL1018PJJ DOCKER LOCK EXTREME GREEN 0 * $2,260.00
KRL1012BPJJ LKR, EXT GREEN W/BRIGHT 0 * $3,095.00
KRL1023CPJJ 3BK RC W/2 FW DRWRS EXTGREEN 0 * $10,800.00
========
Retail $16,155.00
GeorgiaHybrid
Well-known member
Are you trading anything in?
chickenhauler
Well-known member
No trades. After rebates, final price is 8416 + tax.
chadster1
Well-known member
Almost 1/2 off of list. You arent going to get much better than that.
What kind of rebates are you using?
Looks like 5940 for the 1023 for me. Said he'd take 10% off if I paid it all up front. Pretty sure i'm going to take him up on it. Plus seemed like I'd get a decent trade. Just have to wait till Nov.
Looks like 5940 for the 1023 for me. Said he'd take 10% off if I paid it all up front. Pretty sure i'm going to take him up on it. Plus seemed like I'd get a decent trade. Just have to wait till Nov.
chickenhauler
Well-known member
$1,000 off $10,000 through EC, then 6 months same as cash. I never pass up free money for 6 months.
The Epic's are double rebates, but a comparable package would be around $5-900 more and I don't see the advantage.
Well. Sensibility kicked in. Instead of the 1023 went with the 1022. I grappled long and hard about it but just be a lot more manageable for me now. Plus has twice the capacity of my KRA4107. Be perfect. Can always upgrade later.
I'm pretty excited though. Be nice not to have everything crammed into my current box. Went with royal blue.
I'm pretty excited though. Be nice not to have everything crammed into my current box. Went with royal blue.
farmall400
Well-known member
- Joined
- Mar 18, 2012
- Messages
- 304
Nice, I've got a royal blue box too. Two days after you get your new box you'll be wishing you had gotten the 1023
GeorgiaHybrid
Well-known member
No worry, you can get the 1023 next year....
Haha. Yea. I'm TRYING to slow my tool buying. Hard with such a great Snap On dealer though. So hopefully won't fill it up to fast.
I thought the same thing though about next years show. I'm sure I can find another great deal when I'm ready to upgrade. And keep this one in good shape for a trade. Or hell just keep it and add one
I thought the same thing though about next years show. I'm sure I can find another great deal when I'm ready to upgrade. And keep this one in good shape for a trade. Or hell just keep it and add one
lennoxlennox
Banned
- Joined
- Dec 15, 2008
- Messages
- 1,026
chadster... are they running any deals on lockers?
Streetsweepergto
Active member
- Joined
- Feb 23, 2012
- Messages
- 37
i just got a krl722 from by dealer.
ec rebate of 1000
customer loyalty of 450
then i waited for 2-3 weeks.
he decided he would make a payment of $500 also.
so all in all around 4k.
34 a week.
ec rebate of 1000
customer loyalty of 450
then i waited for 2-3 weeks.
he decided he would make a payment of $500 also.
so all in all around 4k.
34 a week.
SpawnedX
Banned
I think the tool truck brands are becoming desperate to sell boxes. I don't know for sure, but a few of our new techs have the US General stuff and aren't even interested in talking to the truck guys about upgrading, and I don't blame them, their boxes are all holding up just as well as my Classic 78. I have been considering a new box as my tool collection has grown by a decent amount and just the slight mention of a new box and these guys become ravenous, offering deals and trying to one up each other like sharks.
I don't think I have seen a new tool truck box get purchased at my shop in the last year, to year and a half and we have had a lot of new (and failed) techs come through needing boxes.
I don't think I have seen a new tool truck box get purchased at my shop in the last year, to year and a half and we have had a lot of new (and failed) techs come through needing boxes.
Streetsweepergto
Active member
- Joined
- Feb 23, 2012
- Messages
- 37
i looked at us general boxes.
but even the 900 dollar box was not worth it because it was missing features and space of a krl 722.
krl is built really well and have no complaints of the dollar amount spent.
i do like that some of that money went back to american workers.
but even the 900 dollar box was not worth it because it was missing features and space of a krl 722.
krl is built really well and have no complaints of the dollar amount spent.
i do like that some of that money went back to american workers.
Wow. That's nice. And honestly. Don't want to know. Haha.
Flash69
Well-known member
Talked to my Snap On dealer Friday. Getting a Red KRL1022 for around $4500.00. I think it's a good deal however I don't know if it has the SS top or not. I guess I need to call him.
supersteve
Well-known member
My stainless top is "free" because I'm financing (theoretically) through Snappy (will just pay it off 90 day same as cash). You might want to check in on that.
chris142
Well-known member
$3500+tax for a KRA2418 with the carbon fiber drawer pulls and corner protectors.
Flash69
Well-known member
Yeah, when my dealer calls saying the box is in I am going to check into credit. Thanks for the info.