Show your new tool arrivals

[fourtythree]

Some goodies from the flea market.
1/2 " Napa RHFT ratchet
3/8" SK fine tooth ratchet
SK and Craftsman sockets

$30 bucks for all.

 

[jjjrmx5]

is that made for craftsman by nuplu?

Yep. Nupla makes the red/black combo dead blows.

They should come in 3 or 4 sizes last time i checked at Sears.

 

[shoturtle]

is that made for craftsman by nuplu?

Yes it is, they have like 4 different nuplu deadblow hammers. One with the interchangeable surfaces.

 

[SpawnedX]

I have been wanting this for awhile, but every time it comes time to buy tools, I usually want something even more, not this time:

 

[JMartel]

Ridgid R4331 13" planer and a 12 speed Harbor Freight Drill Press.

 

[kar298]

your drill press is upside down

 

[cmandp]

Looks like the shelf on his cart can be unlocked and turned 180 degrees to use either the planer or the drill press. Very clever idea.

 

[JMartel]

Looks like the shelf on his cart can be unlocked and turned 180 degrees to use either the planer or the drill press. Very clever idea.

This.

And a better photo in the planer position:

 

[Deception]

Just picked up this 2 ton, low profile jack from HF.. 2.5" min height to 24" lift!! Its awesome. $99 w/ coupon + $20 for 2 yr replacement plan.
Im not the biggest fan of HF tools, but I dont think anyone makes a jack with these specs for less than $800.

https://sphotos-b.**.fbcdn.net/hphotos-prn1/644573_4025613991803_1564922514_n.jpg

 

[Mugen AP1]

Couldn't be helped

Is there a part number for this amazing work of art? I would shave off my beard just so i could use this every monrning!!!

 

[Bikes&Bowties]

That Silver Eagle bit set rocks for its price.

Especially with a stent discount and weekly special...

 

[psychob0b1977]

Just picked up this set of usa craftsman bolt out at the flea market! They are brand new!

 

[SpookyEng]

OTC 2 ton aluminum floor jack to finally replace one that was stolen.

 

[CaseyJoes.]

Is there a part number for this amazing work of art? I would shave off my beard just so i could use this every monrning!!!

I was pretty excited too at first, and then did some looking around and found out it is made in china. Killed my enthusiasm real quick .

 

[JASTECH]

Then take it vack to Snappy dealer, let them know Snappy China is not accepted.

 

[G1GRANDEUR]

I was pretty excited too at first, and then did some looking around and found out it is made in china. Killed my enthusiasm real quick .

pretty much all the snap-on accessories are made in China or Taiwan.

 

[Paulkenosha]

mine for the day

 

[ShadowRuleZ]

Need to rebuild a GM tilt column. Other stuff is Craftsman to fill a few gaps.

Gearwrench stuff from Cripe, advance auto and the craftsman sale last week. I had a handwritten label from Sears this time. I think their shipping gets worse and worse every time I order something.

 

[rmsg0040]

just picked up a used matco set, with bonus 11mm

all joints are nice and tight

 

[Skin]

the 11mm comes with the set, the loose sizes you have to buy seperate are 8 and 9mm. They're my favorite long box wrenches. Nobody makes anything else like them.

 

[Syndicate]

just picked up a used matco set, with bonus 11mm

all joints are nice and tight

Those are damn nice! I have the MAC TOOLS version and they work great!

 

[RedFordTruck]

Picked these up the other day. Estwing axe was from Sears. Orig price $30. I got them to price match it at $22 online. Then used $7 worth of point Sears just gave me for being a member and walked out with it for $15 and change. Why? Just cause its badass

Then Went to ace looking for Vise Grips. Well they were all chinese and even at $5 i wasnt gonna buy any Rice Grips. So I looked at the craftsman tools and Found this 3/8'' drive Flex head ratchet for $22... Best part? USA made.

They had a USA made 1/2'' drive CM flex head for $33 but i decided to leave it for another day. All of the impact sockets at ace were usa. Tons of USA craftsman at ace.

 

[maddawg308]

Nothing fantastic, but I brought a few busted tools to Sears and I got 2 new flat screwdrivers and a ratching DBE wrench. I break 'em, they buy 'em. No fuss no muss.

And all three tools were still made in USA! Yay!

 

[reddog289]

Won't show pix of what I got yet, But I might have got a deal.

 

[afazz]

Snapon 1/4" metric 12pt semi-deep, two Proto 1/4" 12pt, a Craftsman inch thread pitch gauge (new old stock, made in Germany), a Facom 6/7mm thin wrench to complete my set, and a Snapon metric bolt gauge set.

 

[rmsg0040]

the 11mm comes with the set, the loose sizes you have to buy seperate are 8 and 9mm. They're my favorite long box wrenches. Nobody makes anything else like them.

The set came with 10-19mm and the guy had an extra 11mm to go with it.

 

[jeffmoss26]

Snap-on pick/screwdriver cases from zbadass

More Klein/Bell System pliers from flatintoone

Also got a 3/8 x 18" bell hanger bit and a General 4 in 1 mini screwdriver (US made!) on clearance at a local hardware store last weekend.

 

[Chadwilliam1]

got these a few days ago. won't be used much but I wanted them to go with my metric set.

 

[shoturtle]

I wish I had these about a month ago, would have made my life a bit more easy. Taiwan made indexing head.

 

[chris30066]

I picked up this Dake 3 ton arbor press on Craigslist today. I'm going to have to build a stand for it now.

 

[csmitty]

I picked up this Dake 3 ton arbor press on Craigslist today. I'm going to have to build a stand for it now.

Guessing that was the one in Tucker

 

[chris30066]

Guessing that was the one in Tucker

Yep That's the One.

 

[csmitty]

Good deal

 

[CaseyJoes.]

I picked up this Dake 3 ton arbor press on Craigslist today. I'm going to have to build a stand for it now.

Very Nice!

 

[Chadwilliam1]

Armstrong t handle, Knipex cutters, craftsman adjustable and craftsman nut splitter.

 

[FancyLearnin]

Picked up a few woodworking items from Holbren the other day, including a wicked-cool Shelix cutterhead for my Powermatic jointer.

 

[north]

Love that Dake. Simply a beautiful piece of equipment.

 

[franzdom]

 

[Chadwilliam1]

that is a perty ratchet, how much does one of those cost?

 

[jeffmoss26]

Placed my first order from the Sears outlet site...I did not know they had even shipped, but here they were today! 14.99 plus shipping, 23 bucks total.