Show your new tool arrivals

[Mastermind]

i just do it with a thumnail, just the plastic cap, the hex stays. and is threaded inside for air fitting

 

[Snapped-off]

i just do it with a thumnail, just the plastic cap, the hex stays. and is threaded inside for air fitting

Oh

 

[smogtech]

Just got an IR 2135qtimax, and a 118maxk in the mail today. Waiting on a 2015 3/8 Hammerhead and a 2115qtimax.

Also got the Craftsman 28 piece specialty wrench set (USA). I only bought these for the deep offsets, but I guess i will keep the rest (SAE/Metric Flare nut, Tappet, Half-moon). Thanks to Pipster, I wouldn't have even looked for this set.

Not pictured, as they are at work, are Punches/Chisels. I was going to see if there were any USA Craftsman left, but all the Sears around me had only China sets available.

?SHLF80A? Don't remember the actual part number. It's the Quick-Release version of this ratchet. For 99$, I couldn't pass it up.

In the second picture, can anyone tell me what the hell this is? The little booklet says it's a swivel adapter. But it doesn't screw out or anything. So how do I put a Milton fitting in it? I'm stumped

Good Choice of air hammer cheaper than snap on by a far amount and very powerful tool. Mines has paid itself several times off. Shearing bolts, loosening rusted suspension parts, releasing ball joints; beats the hell out of swinging a hammer all day long.

 

[canuckian]

picked up an LED light from the snap on guy today. the form a funnel was a freebie.

 

[archirelic]

Grainger

Type in 10G651. I think they're out though. Unless they only pull regional. I ordered two and got one. Placed another order today to try and they called and said they were out. The alternate is the same pliers though which is weird. Same mfg # and UNSPSC #

Thanks!

 

[walwalka]

I stopped and grabbed myself a screwdriver today just because I saw him sitting and I wanted a better 4" #2.

 

[JayL]

3M Accuspray Gun for Primer and 3M PPS system

 

[lok]

I stopped and grabbed myself a screwdriver today just because I saw him sitting and I wanted a better 4" #2.

Very nice. Any COO on the tool? It looks like a German made Witte pro top plus.

Used and abused for years.

View media item 15836

 

[sarel.wagner]

New to me toolbox




Snagged this one, a bit abused being repainted but not prepared

Rgrds

 

[walwalka]

Very nice. Any COO on the tool? It looks like a German made Witte pro top plus.

http://www.angloamericantools.com/images/hand-tools/large-images/witte/pt-86155.png
[IMG]http://www.angloamericantools.com/images/hand-tools/large-images/witte/ptp-86107.png

Used and abused for years.

[IMG]http://garagejournal.com/forum/picture.php?albumid=1425&pictureid=15836][/QUOTE]

It is made in Germany, I do believe it is the Witte Pro top. I'm going to but a set of the Pro top's next pay check to keep in my office.

 

[Monte]

3M Accuspray Gun

coo ?

New to me toolbox

sweeeeeeeeeeeeeeeeeeet !

 

[xwarp]

Hit the swap meet after going to the local mall so the wife could return somethings to JC Penny. I ran over to Sears to see what they had worth buying..

Noticed they had the 3/8th's 6pt metric sockets on sale for 21.99 and bought the last set of U.S. made they had. Sad to see the other sets, same metric set, had a less finished look to them and stamped china.

Made a comment about that to the sales dude and he mentioned that he'd been hearing a lot of that lately.

Anyways, hit the swap meet and found the Cornwell die grinder sett for 30.00 and then another set of regular chrome 6pt metric craftsman sockets for 6 dollars.

 

[jeffmoss26]

Two more additions to my Bell System tool collection thanks to Mickey O!

 

[jhelrey]

Tooltopia just got me for $103.00 today!

Oh well, got something for free at work last night that was going to the dumpster and sold it for $200 today

 

[Mazdaratti3]

Latest additions....

 

[RedFordTruck]

Hit the swap meet after going to the local mall so the wife could return somethings to JC Penny. I ran over to Sears to see what they had worth buying..

Noticed they had the 3/8th's 6pt metric sockets on sale for 21.99 and bought the last set of U.S. made they had. Sad to see the other sets, same metric set, had a less finished look to them and stamped china.

Made a comment about that to the sales dude and he mentioned that he'd been hearing a lot of that lately.

Anyways, hit the swap meet and found the Cornwell die grinder sett for 30.00 and then another set of regular chrome 6pt metric craftsman sockets for 6 dollars.

You about gave me a panic attack! I thought you were buying regular chrome sockets and I saw "stamped china" and I thought WHAT!?

But then I saw you were talking about impact sockets.

Good find on the USA made.

Ill save the freak out for when the hardline goes abroad.

 

[jeffmoss26]

drool...orange grip ons!

 

[Chadwilliam1]

what are those files?

 

[thesilverone]

looks like nicholson?

 

[Mazdaratti3]

Yeah nicholson... had been looking at them for a while and they dropped in price a bit so I pulled the trigger.

http://www.amazon.com/gp/product/B001T4K1O6/?tag=atomicindus08-20

 

[Chadwilliam1]

thanks those look nice, I added those to my wishlist.

 

[shoturtle]

Yeah nicholson... had been looking at them for a while and they dropped in price a bit so I pulled the trigger.

http://www.amazon.com/gp/product/B001T4K1O6/?tag=atomicindus08-20

where are they made?

 

[thesilverone]

they stopped being made in USA a year ago....I bet COO is brazil or mexico

 

[Mazdaratti3]

stamped Mexico

 

[archirelic]

they stopped being made in USA a year ago....I bet COO is brazil or mexico

There's still mixed sets floating around out there. When amazon had their ridiculously stupid pricing on them, [search for the thread and you'll see what I'm talking about] I got some sets that were full U.S.A. and some that were mixed U.S.A./Brazil/Mexico. All of them exhibiting great craftsmanship though.

 

[thesilverone]

^I remember that thread

 

[jalfaro]

A couple snapon tools, hazet 1/2 ratchet is not a new arrival

 

[rt dak]

Snappy universal joints and 3/8 impact extensions

 

[kiatech]

The guy at sears thought I was joking when I told him I am not going to accept someones else used ratchet or a new chinese one. Walked out with this for $35. I already gave it the red lube of love and its smoooooooooooth.

 

[03protege]

The guy at sears thought I was joking when I told him I am not going to accept someones else used ratchet or a new chinese one. Walked out with this for $35. I already gave it the red lube of love and its smoooooooooooth.

What ratchet did you trade in?

 

[canuckian]

got the first box-o-stuff in a series from Warmpakes today. Just a few deals he graciously allowed me to ship to his place over the past 6 months or so. some I found, a lot he found

 

[RobertMo1988]

UHhhhUMMMMMmmmmMmMM Blue pry bars my friend?

 

[canuckian]

lol thought you might notice those. I think I told you about the first one, not sure. thought you had a set already?

 

[RobertMo1988]

i always like blue, whether they are in my possession or on my computer screen!

 

[warmpancakes]

thers 2 of the same one, cause hes got 2 hands. and it was dirt cheap

 

[kiatech]

What ratchet did you trade in?

http://www.sears.com/craftsman-3-8-...p-00944815000P?prdNo=2&blockNo=2&blockType=G2

 

[canuckian]

thers 2 of the same one, cause hes got 2 hands. and it was dirt cheap

lol yeah... cause I'm that coordinated to use 2 prybars in 2 hands at the same time...I'd likely stab myself somehow!! they were dirt cheap though!

 

[entryleveltech]

http://www.sears.com/craftsman-3-8-...p-00944815000P?prdNo=2&blockNo=2&blockType=G2

^ I hate you =-p Jking, Must be nice going from 36T to 84T and not having to pay full price

 

[Chadwilliam1]

Sears has done that for me before. I have taken in cheap wire strippers and paid the difference for the better pair.

 

[jeffmoss26]

Hot damn canuckian!!