Show your new tool arrivals

[archirelic]

Ordered on the 28th and received on the 30th. Had to have them shipped to me, for only $6.22, b/c there's no Sears Outlet near me. Sorry for the craptastic pics. These are the 14 piece metric and sae industrial wrench sets.

 

[Metroid]

I'm new here and I've been buying a lot of tools this past month. Ill post pics if them. Hope it doesn't bother you guys if I post multiple pictures

Snips, terminal crimping kit, 4lb sledge hammer (unbreakable) and a 20pc punch and chisel set

Snap on striking prybars

3/8 drive flex head ratchet and a fixed 1/2 drive ratchet (snap on)

Matco 3/8 drive air impact gun. I love this sucker!

Gear wrench flex head ratcheting wrenches both standard and metric

Snap on soft handle screwdriver set. Got it for $50

 

[padronanniversary]

Who makes those hose pliers ?

I'm new here and I've been buying a lot of tools this past month. Ill post pics if them. Hope it doesn't bother you guys if I post multiple pictures

Snips, terminal crimping kit, 4lb sledge hammer (unbreakable) and a 20pc punch and chisel set

Snap on striking prybars

3/8 drive flex head ratchet and a fixed 1/2 drive ratchet (snap on)

Matco 3/8 drive air impact gun. I love this sucker!

Gear wrench flex head ratcheting wrenches both standard and metric

Snap on soft handle screwdriver set. Got it for $50

 

[braol]

New 1/4 drive SO ratchet TLL72, they just came out. Didnt put a tape on it, but its 9 or 10" long.
pic came out a little blurry

 

[imnatelol]

Mac tools AWP050C 1/2" impact gun. This thing is TINY and very powerful for its size.

 

[Rogue1987]

New 1/4 drive SO ratchet TLL72, they just came out. Didnt put a tape on it, but its 9 or 10" long.
pic came out a little blurry

Is it stamped USA on the head?

 

[jeffmoss26]

5mall5nail5, there is a guy selling a green pick set for 100 bucks on eBay LOL
Metroid, very nice!!

 

[braol]

Is it stamped USA on the head?

I will check tomorrow.

 

[Rogue1987]

Thank You. Depending on that, I will order one from their site, as my snap on guy quit and has not been replaced in 8 months yet. Lame.

 

[braol]

SO site says its made in USA

ETA, not sure how long they have been available, but my SO guy said he has had them on order for 5 months and just got them this week.

 

[FLRover]

Newest stuff

Where did you find that S&K setup? I don't use much SAE but it would be handy to have in the box.

 

[FLRover]

Been bored to tears since my wife went back up north this week (I move back next week) so I stumbled into the 24hr Advance at 2am this morning and bought a few little Gearwrench items, Klien crimpers and a Powerbuilt serpentine belt tool.

Went to drop off the tools and discovered my latest Snap On order had arrived. Got in the female torx I was curious about about I believe they are worth the premium over GW. Super thin walls and better machining.

 

[5mall5nail5]

1/4"er to match the 3/8"er


1/4 and 3/8 snap on green by Jon Kensy, on Flickr

 

[bcradio]

Ordered on the 28th and received on the 30th. Had to have them shipped to me, for only $6.22, b/c there's no Sears Outlet near me. Sorry for the craptastic pics. These are the 14 piece metric and sae industrial wrench sets.

I hate you... I want a set of these so bad and you keep tempting me. I have the 13 pc of Cman Pros though so I can't justify.

 

[Flash69]

Got a few new things over the last 2 weeks... Box arrived today!!!

 

[ihateminimumwage]

They were on sale as sets at my local lowes, I actually like these a little better than the hansen's because you can flip them and actually see if they are 6 or 12 point sockets. Pretty handy for when buddies are looking for tools. I know the SAE set(red) was on sale for 14.99 or 14.97 and I convinced the girl at the counter the blues were also She must of wanted me for my body Online the red SAE are on sale but the blue metrics aren't, I can get a better comparison picture of hansen vs kobalts at home if need be


http://www.lowes.com/pd_393408-2232...y&pl=1&currentURL=?Ntt=socket+tray&facetInfo=

I just ran by there but didn't pull the trigger. The 3 pack of the tall (Hansen style) ones were still $25. They had new 3 piece sets that were stubby compared to the ones in the picture there, and were on sale. Didn't look bad at all, but I just got off work and just wanted to get home. Might stop back by tomorrow and actually pull them out of the box and see how they look.

 

[Metroid]

Who makes those hose pliers ?

If you are talking about the red handle pliers next to my screwdrivers then the Brand is MAC Tools

 

[Metroid]

Got a few new things over the last 2 weeks... Box arrived today!!!

What box is that!? Can you provide the specs for it? It looks pretty deep from this angle

 

[Southern]

Metroid, you're not a high school girl. You're a grown *** adult male with good taste in tools.




Stop instagramming.

 

[cgv69]

20pc punch and chisel set

Metroid - who made the punch set (SK)?

How do you like it and what did it run your $ wise?

Tanks!

 

[cgv69]

This is one of my favorite threads on this forum but I never contribute to it. I don't know if its because it seems a little weird or if I'm just lazy but I never take pics of my new tools. Anyway, here's a start...

I have been on a hammer buying kick lately. New in this pic is a Vaughan 3# Blacksmith hammer, Estwing (Trusty Cook) 21 & 45oz softface and 47oz ball peen dead blow hammers. The Estwing 26oz ball peen hammer is relatively new too. It replaced a 16oz Craftsman (Vaughan) hammer I gave my son. I love Estwing hammers as they are built like tanks but I think this is one tool I'd rather have a wood handle for? I may have to sell this one and get another Vaughan?

And I finally got me a nice prybar set too...

 

[Flash69]

What box is that!? Can you provide the specs for it? It looks pretty deep from this angle

It's a KRL1022. Specs are 45 7/8 H, 54 1/4 W and 29 1/8 D.

 

[braol]

Is it stamped USA on the head?

Not on the head, but it is on the handle. It has TLL72 USA on the handle.

 

[battlegraduate09]

I hung out with my mom today and she wanted to go to sears. Figured while i was there might as well check out the close out section for some good USA made stuff thats leftover. Used my reward points and ended up paying roughly 6 dollars for this set.

 

[Chadwilliam1]

nice set!

 

[JASTECH]

I need a rethread kit like that too, my Sears is a home store so very little tools to be had.

 

[Mazdaratti3]

Where did you find that S&K setup? I don't use much SAE but it would be handy to have in the box.

Got it off ebay for $54

 

[tjmonsen5]

The rethreading set is one of my most useful tools in my box. I am just a weekend warrior but i end up using it at least once a month to clean up our fix a cross threaded or rusty bolt. Every single person should own this set. Saves my **** countless times.

 

[thesilverone]

great purchase. that set labeled as snap on sells for much for money!

 

[battlegraduate09]

Thanks guys. I couldnt pass it up marked down so much, then the reward points just made the deal sweeter. I also picked up a 4 piece crescent wrench set for $11. And my snap on guy gave me a hat with the green S on it. He knows im fond of green snap on

 

[RV77]

The rethreading set is one of my most useful tools in my box. I am just a weekend warrior but i end up using it at least once a month to clean up our fix a cross threaded or rusty bolt. Every single person should own this set. Saves my **** countless times.

my thoughts exactly

 

[FLRover]

Went to the Pawn Shops today looking for 1/2" metric sockets, bought everything but that. Got the S&K setup for $50. Already sold the metric stuff including the ratchet and extensions to a buddy for $60 (all I wanted was the SAE stuff to round out my 1/4 collection). Made a **** tool stop at HF and Advance and picked up some odds and ends.

 

[Mavawreck]

Wife gave me a ratchet rebuild kit for my vintage 3/8 SK for my birthday, wasn't expecting that at all. Already installed it, going to be a favorite ratchet for sure.

 

[Metroid]

Metroid - who made the punch set (SK)?

How do you like it and what did it run your $ wise?

Tanks!

Brand is ATD model number "720" 20 piece set.

I did a quick google search and it retails for about $28, but I got it with my company discount for $12

I haven't had to use it yet but ill let you know my thoughts in the kit once I do

 

[cgv69]

I hung out with my mom today and she wanted to go to sears. Figured while i was there might as well check out the close out section for some good USA made stuff thats leftover. Used my reward points and ended up paying roughly 6 dollars for this set.

Lucky snag - I stopped by my local Sears today hoping to pick up this set on clearance. They had 3 in stock but still marked at full price.

 

[MachYou]

Had to do a tune up and brakes on my car so any excuse to buy another tool and make life easier doing the rear brakes it was $37 out the door with a 15% off coupon.

 

[kiatech]

I thought it was neat.

 

[jeffmoss26]

What exactly is it? A huge crowfoot wrench? Lol

 

[JASTECH]

I bet that is one huge crow hopping around!

 

[kiatech]

What exactly is it? A huge crowfoot wrench? Lol

yes Its a 2-3/16"
http://buy1.snapon.com/catalog/item.asp?tool=&item_ID=632426&group_ID=674922&store=snapon-store