Show your new tool arrivals

[Chadwilliam1]

Joes racing tire gauge.

 

[03protege]

Learn something everyday a wise man said. So please tell me what this awesome peace of machinery is capable off?

Being that the sign is Ammco brake service I would put money on it being a brake lathe. I know Ammco still makes them today.

 

[rider9195]

Ll

Just curious, is the detent ball missing on the 3/8"?

It's on there. The way it was packaged the ball was facing down.

 

[jrherald420]

Learn something everyday a wise man said. So please tell me what this awesome peace of machinery is capable off?

Turns rotors and drums. They are selling for about a grand here, 100 bones is a score!

 

[Trucky]

Anyone know how old these things are? I just kinda had them lying around so I've no clue.

Just "re-found" them in the old Cman toolbox I bought a while ago. Any ideas?

 

[ianguilly]

Another purchase.

 

[RobertMo1988]

Should I or Should I not open these? Oh and got this razor key chain and money clip!

 

[sonoma01]

Sorry, I can't get pictures to load.
Picked up a very lightly used metallic blue MG325 impact and a set of 90th anniversary Snap-On screwdrivers. Now to hunt down a blue and a white MG725. Any leads out there?

 

[RobertMo1988]

snap on sells it on there site stock number MG725MBLUE and it shows that it is in stock.

METALLIC BLUE MG725
Stock#: MG725MBLUE

$435.00

and if you like the metallic blue check out this drill

http://www.ebay.com/itm/251177262797?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

 

[jeffmoss26]

Nice, Rob. I saw that set of screwdrivers on ebay.

 

[RobertMo1988]

Nice, Rob. I saw that set of screwdrivers on ebay.

yea they went cheap for 10 year old unopened screwdrivers, cheaper than what a new set cost

 

[jeffmoss26]

AND you got a shirt!
Where did you get the money clip, that's sweet!

 

[RobertMo1988]

another ebay listing. went for $20 even came with a matching key chain!! lol that i have 3 or 4 of.

 

[sonoma01]

snap on sells it on there site stock number MG725MBLUE and it shows that it is in stock.

METALLIC BLUE MG725
Stock#: MG725MBLUE

$435.00

and if you like the metallic blue check out this drill

http://www.ebay.com/itm/251177262797?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

Thanks for the info. I checked last week and it was not in stock. Might have to go for that drill as well.

 

[87Pomona]

Anyone know how old these things are? I just kinda had them lying around so I've no clue.

Just "re-found" them in the old Cman toolbox I bought a while ago. Any ideas?

That Snap-On square shaft extension is from 1920-1930

I have one similar or same.

 

[csmitty]

another ebay listing. went for $20 even came with a matching key chain!! lol that i have 3 or 4 of.

Well, I guess now I know

 

[stroked80z28]

Joes racing tire gauge.

I have that gauge, I like it.

 

[RobertMo1988]

Well, I guess now I know

were you bidding on it too?
my father in law has the same one thought it would be cool if we had matching ones jk

 

[tank4114]

don't open them there are already heaps of opened ones

 

[csmitty]

were you bidding on it too?
my father in law has the same one thought it would be cool if we had matching ones jk

Was watching and going to try sniping at the end but it jumped to $20 and was like enh...Might keep an eye out. I got the leather magnetic one from staples and its pretty horrid. Probably get a made in USA titanium one for now.

 

[rt dak]

Bosch drill / impact driver combo. Black Friday deal.

 

[RCPro87]

Ive been buying a lot of tools lately, should NOT have jumped on the Snap-On truck today, walked off with these......got a 6pc Radiator Hose Pick Set, my guy had an older offer that had the 3pc trim pad kit with it for free, couldnt pass it up. Also got a 7 pin trailer test plug so i could troubleshoot my truck. Then.......on the way home, stop in the middle of the road to pick up the channellock screwdriver, tip is broken but oh well

 

[Maexle]

Some nice broken tap extractors

 

[Chadwilliam1]

went into Sears to get a few rebuild kits, I ended up buying these.

 

[gf0012-aust]

new Husky flared wrenches and BikeService T handles, 8, 10 and 12mm

 

[91bronc300]

Rennsteig pin and taper punches, Knipex CoBolt cutters, and a few NWS pliers. All from German Hand Tools.




Black Friday pick ups. Two small Stanly shop vacs from Menards and a step ladder from Home Depot.




More Black Friday. Leatherman Sidekick from Home Depot and a Porter Cable oscillating tool from Amazon.




3 awesome work shirts from Garage Journal member Ironhorse. Here's a pic on one.

 

[rmsg0040]

some stuff from snapon is still back ordered, dealer gave me the wrench. Magnetic can holder got from princessauto

 

[Skin]

 

[the1nonlyjl]

My success on Black Friday Shopping:

GEARWRENCH STUBBIES (NEW)-$50

GEARWRENCH FLEX HEAD SET (NEW)-$29.99

RYOBI 6" GRINDER (NEW)-$22

CRAFTSMAN STUBBIES (NEW)- $75

 

[amitchell]

Bondhus metric and sae hex, and prohold star tip.


Wera Lasertip set


Proto metric and sae hex 3/8 drive with an extra long 8mm


Proto 1/4 stuff




Proto J1200R-MASD





Proto / Snappy Ratchets



Proto Extensions / Universals



Proto metric and sae 6pt 3/8dr shallow and 1/4dr 6pt metric deep






And I have a nice order of NWS coming in soon.

 

[Trucky]

Man I'm in the wrong profession! I hope I'll get to post those kinds of orders in 2025 or so

 

[rmsg0040]

^^ nice haul on the protos

 

[sonoma01]

Just picked up a blue MG325 for $190. Now to get that blue MG725 at the end of the week when I get paid. Still on the never ending hunt for a white MG725. If anyone knows of any let me know.

 

[Adrien]

 

[Matt472]

Picked up an Airlift.

 

[Jawn]

The big brown tool truck brought me a Superkrome fix.

SK 40162, 10" x 1/2" extension
SK 44498, 1/4" bit socket adapter (magnetic)
SK 40971, 1/4" long handled ratchet
SK 45171, 3/8" ratchet in 1/4" long handled body


Also included a comparison pic with the regular length 1/4" and 3/8" ratchets. Also shows a T20 bit in the 44498 socket.

 

[O_M_Jeep]

Amazon and UPS were busy the last 2 days.

I'm curious to see how the 3/4" Earthquake holds up to truck lugs, the C3 and 1/2" Earthquake I know will do well from the reviews here. The pressure tester is awesome, the case is massive though, way larger than I was expecting, but it has just about everything you could need or want, including an induction feed when hooked to shop air.

I'm also looking forward to using the torque adapter to see how close the dozens of various torque wrenches around the shop are, to each other, the cert. of accuracy is nice, and very official looking, but I'm not going to assume it's 96% accurate or whatever the tolerance is.

 

[MechanicNamedJohn]

The pressure tester is awesome, the case is massive though, way larger than I was expecting, but it has just about everything you could need or want, including an induction feed when hooked to shop air.

.

Where did you purchase the pressure tester, and how much? thanks.

 

[rshadd]

Craftsman Bottle Cap Opener... 2 for $10. Kinda silly but they're pretty nice.

 

[padronanniversary]

Where did you get this from ? Been looking at amazon and can't find them