Show your new tool arrivals

[64Trvlr]

losabio, would that be a 4-track installer like me?

ROTFLMFAO


I've still have some 4 track tapes and a ton of 8 tracks.

 

[JASTECH]

64Trv, Showing your age, lol...Nothing like sitting in the chair and have 10hrs of reel to reel playing or playing my 78's on the Magnavox, pulling them out if their 8 sleeved album eh?

 

[64Trvlr]

64Trv, Showing your age, lol...Nothing like sitting in the chair and have 10hrs of reel to reel playing or playing my 78's on the Magnavox, pulling them out if their 8 sleeved album eh?

Yes indeed, I'm looking for a couple of tubes for my 1960 Packard Bell Stereo. I'm the second owner. It has the clear "test" records that explain how "the magic of stereo works" on the Space Age Packard Bell Stereo.

I've got a lot of the 5-10 78 sets in the book w/sleeves.

 

[64Trvlr]

For some reason I can hear "In-A-Gadda-Da-Vida" playing in the background when I look at that knife.

Yup, the 17 minute version.

 

[PavelK313]

Wera slotted & phillips screwdrivers and Matco 3/8 flex ratchet.

 

[harrydude]

Well all the new tools here make me drool


But how do you guys organize your boxes

 

[redwrench60]

I've needed one of these rag cans since the 70's well better late than never 40 years later I finally got one.

Surprize! Surprize! when I woke up the next morning to find out I won both ebay bids. How the hell? Not just one but now I the proud owner of two PH3050A's. Never in a million years did I think I could afford one of these. Guess I showed all them bidders not to mess with me.

These do not have the quick chuck. Can someone on here that has one of these confirmed that the IR chuck will fit...or give me good reason not to save money and go with SO.

At this rate you could just get a couple more PH 3050's and forget the quick change chuck. Just chuck a different bit in each of them.

 

[Chadwilliam1]

Well all the new tools here make me drool


But how do you guys organize your boxes

you joined in 09 and this is your first post, lol.
http://www.garagejournal.com/forum/showthread.php?t=466

 

[CaseyJoes.]

Bought these from Zoro Tools with 40% code on cyber monday.
Posi-Lock TB-1045 & TB-100

 

[amitchell]

Proto 5270 3/8in universal joint Made in Canada.

 

[atwageman]

Nothing big, just filling in a couple of gaps in my socket sets.

 

[gf0012-aust]

Refco Torque Wrench

10-75nm

 

[wvrrcarknocker]

My weekly Cripe haul, and a Blackhawk 1-1/4 ratchet wrench that I picked up from a member

Armstrong 1/2 drive impact universal 22mm
Armstrong 3/8 drive impact deep 18mm and 12mm
Armstrong 1/2 drive impact deep 17mm
Armstrong 3/8 drive 6pt metric shallow chrome set 10-18mm
Kobalt USA metric midget wrenches
Armstrong 3pc Locking Plier set
US Tape made in USA 12' tape measure
Allen USA 16x18mm flare nut wrench
Armstrong full polish 6pt combo wrenches 13mm, 15mm, 16mm, 17mm, 19mm
Armstrong 12pt 6mm combo wrench
Allen USA metric crowfoot set (missing a 17mm and has a duplicate 16mm, but i'm sure cripe will fix me up)

 

[Mike306]

Got a similar set free when i bought the ratcheting screw driver a few weeks back. Its a great set! well made

MAC branded in the UK. No other markings!

 

[jeff g]

Got a similar set free when i bought the ratcheting screw driver a few weeks back. Its a great set! well made

MAC branded in the UK. No other markings!

Hi
what bike is it, in your avatar.

 

[rmsg0040]

Just under 30:

 

[atwageman]

Some stuff I picked up over the Thanksgiving holiday.

Gearwrench SAE & Metric set.

Kobalt 1/2" Dr. SAE & Metric Sets.

Kobalt SAE & Metric Swivel Sets and Lisle torx set.

 

[jeffmoss26]

Picked these up from the Snap-on truck today. 5ACP pliers, nice little guys.
http://sphotos-a.**.fbcdn.net/hphotos-ash4/429443_4015848801327_513379858_n.jpg

 

[TheJohn]

The CT661 came in today off the snap-on truck. I was off today so haven't gotten a chance to properly use it, but I'll give it a good trial run as soon as possible!

 

[rshadd]

Craftsman Pocket Telescope Magnetic Pick-Up Tool... $2.99 (free after SYWR points)

 

[SoulDe]

Enviado desde mi GT-I9100 usando Tapatalk 2

 

[wittycow]

Made a couple of stops this week! Getting busy at home & work, so I need more tools!!

Craftsman Metric Flare Nut Wrenches
Hammer
Chisel Set

Porter Cable 3amp Multi Cutter

Bosch Drill and Driver combo.....on sale at Lowes

Ridgid Jobmax...free ratchet head!

 

[shoturtle]

my new metabo grinder

 

[pupjoint]

these arrived sometime early this year , i was digging around in an old hardware shop, he was still keeping all these....i bought them all

 

[96snma]

^ do you mind if I ask how much

 

[pupjoint]

 

[bgott]

Nice score! How much did you have to give for all of that stuff?

 

[pupjoint]

^ do you mind if I ask how much

i cant remember the individual prices anymore, but not today's prices for sure and also not super dirt cheap.

the box i think i paid about USD70 for it

socket set i think USD 80?

rest i cant remember

 

[pupjoint]

i also found this....this was cheap and it was old and i wasnt sure if it still works.

it still works actually, but i wanted to have it rebuilt and calibrated just to be safe.

so i showed it to my local dealer and he told me to put in the museum instead...LOL

 

[skulldrinker]

i cant remember the individual prices anymore, --cut--
rest i cant remember

That's the same line i tell my wife everytime she walks into my garage. But I will take the truth to the grave with me.

 

[kiatech]

rock n roll cab truck came by today and he also gave us "passes" for the Masters of metal tour thingy on thursday. Has anyone been to one? is it worth while?

 

[cattleranchmarch]

What is you thoughts on the 1/2 deep sockets? I am thinking of picking up almost that same haul.

Some stuff I picked up over the Thanksgiving holiday.

Gearwrench SAE & Metric set.

Kobalt 1/2" Dr. SAE & Metric Sets.

Kobalt SAE & Metric Swivel Sets and Lisle torx set.

 

[Jarhead0408]

pupjoint,

What is the model number on that ?obstruction ratchet? Is that what it is even? I've never seen one like that!

If you want to sell one consider me interested!

 

[pupjoint]

pupjoint,

What is the model number on that ?obstruction ratchet? Is that what it is even? I've never seen one like that!

If you want to sell one consider me interested!

which pic you referring to?

haha no selling for now, i am in Asia anyway, shipping will be pricy. we pay a lot more for Snap Ons in this part of the world ....sad

 

[rickhigginshtbr]

10-piece Craftsman Industrial satin 6-point metric + standard combo sets

11 piece Craftsman Industrial 1/2 standard impact sockets, shallow and deep sets... roughly $80 total for all 4 sets.

 

[Mike306]

Hi
what bike is it, in your avatar.

It's a Triumph Street Triple R

 

[jeffmoss26]

pupjoint, that is some very nice stuff!!

 

[supra90turbo]

Those speeder ratchets are something else... Never seen that before!

 

[supra90turbo]

Snap on truck was here.

BOGO deal on the ratcheting screwdrivers. Buy the SSDMR8A get the SSDMR1A free

I wanted one of these for a while and he happened to have one on the truck so, no argument here...

 

[warmpancakes]

Snap on truck was here.

BOGO deal on the ratcheting screwdrivers. Buy the SSDMR8A get the SSDMR1A free

[/IMG]

really my dealer just has them on sale?