GearWrench 120XP buy

[Mike-Trident]

Folks:
People have been contacting me still wanting the 120XP pricing. Since the promo is over, I simply can't buy products and sell them for the same price as when the sale was going on, as the sales price was way below my standard cost.

I want to see if there is enough interest to do a large GearWrench 120XP buy around September.

If there is, I will contact my rep and see if we can get the same pricing back.

My goal is the get the same pricing as earlier and sell it for 60% OFF list.

Please just let me know if you are seriously interested. By September, everything should be back in stock and with enough notice, I can stock all the parts and make one large order.

Mike

This board looked like the most logical place to put this, so please forgive me if it belongs somewhere else.

 

[ADSR]

I wish, i just bought from amazon for 130 for the four piece. Your price was much better, but I don't think you ship to Canada.

BTW, the xp120's are ****** awesome!

 

[Mike-Trident]

I wish, i just bought from amazon for 130 for the four piece. Your price was much better, but I don't think you ship to Canada.

BTW, the xp120's are ****** awesome!

Hey Lord, we DO ship internationally!

Let me know next time what you need and I will see what I can do.

Mike

 

[71goldss]

I'm still interested in picking up the 120xp 4 pc flex head ratchet set, but I'd only be interested in this group buy if it would be in stock at that time, or at least a very short turnaround time. Thanks for the possible promo Mike!

 

[FJ 432]

Mike,

I marked yes. Could you tell us what was offered in the past? I don't recall.

 

[Mike-Trident]

Mike,

I marked yes. Could you tell us what was offered in the past? I don't recall.

Hi FJ. In the past I was able to offer all the 120XP (individual pieces and sets) at 60% off list. If you find it on my website, look for the list and multiply it by ".4" to find out what the discounted price would be.

Mike

 

[Mike-Trident]

I'm still interested in picking up the 120xp 4 pc flex head ratchet set, but I'd only be interested in this group buy if it would be in stock at that time, or at least a very short turnaround time. Thanks for the possible promo Mike!

Hi Gold:
If we go through with this, I would pre-order everything and have it ready to go... I will do my best to get the stocking levels correct. If everyone posts a PN/desc of what they want it would be super helpful. This way Taylor & I can go down the list and say:
Gold wants 1 of ***
John wants 2 of *** and 1 of ***....

ETC...

Mike

OK BOYS, be back later... Have an interview to do. We are hiring a new web person.

 

[Carlos Iglesias]

Mike, though I just bought the 3-piece 120XP from ya'll, I'd be interest in a flex head set by September. Ok, so here goes GW 120XP-a-palooza...

Carlos Iglesias - (1) 81230P (4 Piece Full Polish Mixed Ratchet Set)

 

[bowlofturtle]

what was the exact item and possible price?

 

[MN4x4]

I would be in for the set of four flex-heads.

 

[ADSR]

Hey Lord, we DO ship internationally!

Let me know next time what you need and I will see what I can do.

Mike

Great! Depending on the price, i might be down for the 2 piece 120xp cushion grip flex 1/4 and 3/8s

 

[Mike-Trident]

what was the exact item and possible price?

Hey Bowl:
CLICK HERE for all 120XP products.

 

[Fast LT1]

I'd be in for a 1/4" flex head and a3/8" flex head

Or the 4 piece set depending on price

 

[mstewart]

I'm eyeing the 1/2" drive 6 point set (#80700P). I would also like to buy the GW 1/2" 6 point sockets not included in the set and some 1/2" deep GW impacts to finish out the impacts that I have.

 

[Ahicksv]

Bought the 3 piece during last promo. I would be interested in the 4 piece flex this time, 81230p.

Thanks Mike!

 

[Quijote]

I'd be in for the 4-piece flex set, 81230p.

 

[Bodyshop]

In for the 4 piece set.

 

[LXCam]

I'd be up for that 1/4" socket set. What are the size ranges, I looked but wasn't able to get the details. Sorry if its obvious, but surfing off a phone blows, thanks.

 

[gtlaw]

I really don't need anymore ratchets otherwise I would be excited about this.

you should see if you can get that BOGO promo for mid depth sockets those would probably sell like hotcakes

 

[Mike-Trident]

I'd be up for that 1/4" socket set. What are the size ranges, I looked but wasn't able to get the details. Sorry if its obvious, but surfing off a phone blows, thanks.

Hey LXCam, I don't have the complete breakdown, but here is what I have on sizes:

This set includes both Standard and Deep 6pt Sockets from 3/16-Inch thru 9/16-Inch and 4mm thru 15mm, a universal joint, 2-Inch & 6-Inch extensions, thumbwheel ratchet and the 120XP 1/4-Inch ratchet.

 

[Mike-Trident]

I really don't need anymore ratchets otherwise I would be excited about this.

you should see if you can get that BOGO promo for mid depth sockets those would probably sell like hotcakes

Let me see what I can do. That is definitely an idea worth investigating. Where have you seen it at?

 

[ragingxtc]

I'd be in for the 4-pc flex head ratchet set.

BTW, I love supporting the retailers that love to support GJ!

 

[LXCam]

Hey LXCam, I don't have the complete breakdown, but here is what I have on sizes:

This set includes both Standard and Deep 6pt Sockets from 3/16-Inch thru 9/16-Inch and 4mm thru 15mm, a universal joint, 2-Inch & 6-Inch extensions, thumbwheel ratchet and the 120XP 1/4-Inch ratchet.

Thanks Mike, that's all I wanted to know. I'm down for the sale. Please do me a favor and if I'm not paying attention pm me when its time and I'll be good to go. Also I would be very interested in the mid depth sae 3/8-&-1/4 socket sets. I already have those in metric. Thnx!

 

[b7labelle]

If you were to place another order, I would like to order a 81306P. What would shipping look like? Free shipping above a certain amount?

And how would our orders be processed? Through you, or through the website?

 

[Mike-Trident]

Thanks Mike, that's all I wanted to know. I'm down for the sale. Please do me a favor and if I'm not paying attention pm me when its time and I'll be good to go. Also I would be very interested in the mid depth sae 3/8-&-1/4 socket sets. I already have those in metric. Thnx!

Hey There.

Here you go:

http://www.trident-supply.com/SearchResults.asp?Search=mid+length+sae+set&Submit=

 

[blare]

I would like a 1/4 with the cushion grip.

 

[Lifted4]

I'm still interested in picking up the 120xp 4 pc flex head ratchet set, but I'd only be interested in this group buy if it would be in stock at that time, or at least a very short turnaround time. Thanks for the possible promo Mike!

Same for me.

 

[ford guy]

Mike, though I just bought the 3-piece 120XP from ya'll, I'd be interest in a flex head set by September. Ok, so here goes GW 120XP-a-palooza...

Carlos Iglesias - (1) 81230P (4 Piece Full Polish Mixed Ratchet Set)

Ditto for me on the 4 Piece Flex head Full Polish Mixed Ratchet Set, PN 81230P.
What kind of price break are we talking about...or is it too soon to tell?

Bob

 

[OxJaw]

I really don't need anymore ratchets otherwise I would be excited about this.

you should see if you can get that BOGO promo for mid depth sockets those would probably sell like hotcakes

Or maybe the 3/8 flex socket sets, I would be in for those.

 

[b7labelle]

What kind of price break are we talking about...or is it too soon to tell?

Bob

Bob,
I believe the final price is the items' list price, multiplied by '.4'.

 

[Just_George]

In for the 4-piece set of flex ratchets...81230p

 

[ADSR]

GearWrench 81223 Roto Ratchet Set

2-Pc 120XP Cushion Grip Flex Teardrop Ratchet Set

When you know the final sale price, shoot me a PM.

 

[CD1]

Just found and read the original 120xp promo thread, then the latest hot deal threads.

I'd buy 81206P and 80565 (should be listed as 10 pc 3/8" drive metric 6 pt flex socket set/ not 14 pc 3/8" 12 pt metric deep flex socket set).

There would probably be more I'd add a bit later.

 

[cheechi]

See everyone is asking for the flex head set, I bought 3 of the 4 except the stubby of that set. Which I didn't want anyway.

I'd have suggested the non flex set at a crazy deal. 81206P

 

[lithdoc]

I'd be in for the 4 piece flex head set!

 

[sks]

I'd be in for the 3 piece set. 81206P

 

[sk farmer]

I'd be in for the 3 piece set. 81206P

list or suggested retail, 165.70 at 40% of list = 46.28 if my math is correct. hell yea i would be in on that deal.

 

[blklegend]

list or suggested retail, 165.70 at 40% of list = 46.28 if my math is correct. hell yea i would be in on that deal.

Your math is wrong, 40% of 165.70 is 66.28...still a great deal.

 

[teesee150]

I'd probably be in for the set of 4 flex ratchets.

 

[danny_barkley]

I'll take (1) 81230P GearWrench- 4 Piece Full Polish Mixed Ratchet Set

for Danny_Barkley