Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Conductor562
Well-known member
jjjrmx5
Well-known member
Looks like a "soft grip" ratcheting driver with the bayonet type cap.
Is it a removeable shank type or fixed shank as they made both in soft grip.
My guess is a promo. Ridgid tools or some other orange/white Fortune 500 co. buying as a dealer give away item.
The white portion SHOULD be a rubber type grip area vs. a hard handle texture per current design stds. If it all is a hard handle type mat'l then it certainly is unique.
Certainly not a catalog or dealer item in my area.
I love my green and black one, aka Kermit.
But it also has the std. black rubber.
Last edited:
Yes it has the removable shank
Conductor562
Well-known member
jjjrmx5
Well-known member
What's the date code stamped on the shank?
That may help us.
I bought my latest stubby ratcheting SO Kermit from my dealer back in 2007 and the removeable shaft had the corresponding "7" date code.
Last edited:
What's the date code stamped on the shank?
That may help us.
I bought my latest stubby ratcheting SO Kermit from my dealer back in 2007 and the removeable shaft had the corresponding "7" date code.
No date code. Just a part number SGCMRC4-40 and a pat number RE36797
RedFordTruck
Well-known member
- Joined
- May 10, 2012
- Messages
- 921
Got the last pair of 10'' Knipex Cobra's from Lowes. $13.49 + tax. Decided to Pass on the 7'' pair for $19.48
ricleh
Well-known member
Didn't really need it, but for $135 shipped I just couldn't pass it up. Snapon metric tap&die set in large sizes.
Didn't really need it, but for $135 shipped I just couldn't pass it up. Snapon metric tap&die set in large sizes.
That's a pretty good deal
canuckian
Well-known member
saw those. I already have one but were watching to see if they went cheap by some fluke. They didn't lol
If you don't mind looking, what is the pn for the handle for the interchangeable shanks? Thank you!
It's NDDC3
The one you bought is orange and white like mine?
canuckian
Well-known member
no i got the red/white one. missed the end of the auction yours was in by seconds. i was speaking of the Honda F1 one that I already had.
Ya there's no rubber. It's hard plastic. I thought it wold be rubber, until I got it in the mail.
wittycow
Well-known member
Got to stay out of Lowe's on consecutive days...Clearance Pliers!
Grabbed these of Amazon:
Grabbed these of Amazon:
e-tek
Well-known member
jeffmoss26
Well-known member
Snap-on dealer or ePay.
crewchief888
Well-known member
Snap on was running a promo, buy a punch set get the mugs for free. I didn't have to buy anything to get them. Driver said you always pay your bill and give me more then I ask for as far as payment so take a set in the house
It was the Johns Creek one. That was the only place I had found that had one.
durallymax
Well-known member
- Joined
- Mar 11, 2011
- Messages
- 918
Got some more Knipex. I finally rounded out my Precision snap ring pliers set, I really only have a few other pliers I'd like from them at this point, time to move onto upgrading/adding to other areas. As always all of the new ones are top notch. Love the conduit cutter as well as the wire rope cutter.
Reorganized the drawer too, still a little more room for a couple others haha.
Reorganized the drawer too, still a little more room for a couple others haha.
SK 49 piece 3/8 set arrived in my office this morning. I bought the 1/2 set a while back since I needed a non-impact 1/2 set and I really liked them so this will be replacing my US Craftsman set I bought a few years ago when I started home wrenching. That set will move to the track car tool box and the cheap set in the track box can remain in the junkyard duty box that they have been in for a while now.
87Pomona
Well-known member
got a more complete impact socket set
coo?..
Got a more complete impact socket set
Quick Question.. And I have that set also. Go Back and Visit the Online Vendor and see if you actually ordered the TF-332M. I know when I bought mine, I was supposed to receive the CV set and the CM-332M set showed up instead. I called them about it because the Moly set is Much more expensive and they told me to keep them, Unless I wanted them exchanged. IRC it was like $35 bucks versus $90 or something like that.
Nice looking sockets.
Actually picked them up in a local store here in Toronto, variety tools
IC..
Got some more Knipex. I finally rounded out my Precision snap ring pliers set, I really only have a few other pliers I'd like from them at this point, time to move onto upgrading/adding to other areas. As always all of the new ones are top notch. Love the conduit cutter as well as the wire rope cutter.
Reorganized the drawer too, still a little more room for a couple others haha.
Now we talking pliers
Damn what a big and nice collection of the best pliers brand in universe!Canoman
Well-known member
Got my first Knipex tool today. Mini bolt cutters from Lowes. $22.98 on clearance. 
Forgot to add, I didn't know at the time that they had 2 flavors chrome-v and chrome-m. Either way I am happy. Maybe for the 3/8 sae I will choose the chrome-v for cost savings as I use SAE much less.
Thanks
RedFordTruck
Well-known member
- Joined
- May 10, 2012
- Messages
- 921
Got these on Clearance at Northern tool. After $5 off $15 coupon the total was $15.09 after tax.
Left some of the bigger sizes I didnt want in stubby. They were out of the 13 mm though
Made in China but they seem fairly nice. Broaching is on center and the open ends are not lobster claw. After the coupon the price per wrench ranged from 74 cents to $1.31. Hard to pass up even though they are China.
Left some of the bigger sizes I didnt want in stubby. They were out of the 13 mm though
Made in China but they seem fairly nice. Broaching is on center and the open ends are not lobster claw. After the coupon the price per wrench ranged from 74 cents to $1.31. Hard to pass up even though they are China.
Last edited:
nahuebsch82
Well-known member
Stopped by the good'ol restore and looky what I found just needs a new air filter box and works perfect! Neighbors are going to hate me now!
[URL=http://s7.photobucket.com/user/afguy2082/media/IMAG0144_zps994c58c8.jpg.html]
[/URL]
[URL=http://s7.photobucket.com/user/afguy2082/media/IMAG0143_zpse62a56df.jpg.html]
[/URL]
just needs a new air filter box and works perfect! Neighbors are going to hate me now![URL=http://s7.photobucket.com/user/afguy2082/media/IMAG0144_zps994c58c8.jpg.html]
[/URL][URL=http://s7.photobucket.com/user/afguy2082/media/IMAG0143_zpse62a56df.jpg.html]
[/URL]