Spanner Wrench Help Please

[Greatwhitewing]

I need a spanner wrench for a Jacobs 633C 1/2" drill chuck. Collar measures 1.543" outside dia and a .212" dia drill bit goes into the three holes equally spaced radially. This is the best I could find so far from Epstein.

Is this what I need?

http://www.wrighttool.com/pub/defau...sults&t2=Search+Results&d=&catalog=0&search=1

 

[jmm]

I would think so. 1/8" is smaller than the holes, and at 1.5", that's perfect for that size spanner.

 

[j-guenth]

Did you try to contact "Jacobs"? I know they make spanner wrenches for their chucks.

 

[Greatwhitewing]

Did you try to contact "Jacobs"? I know they make spanner wrenches for their chucks.

I'll give it a try but it's not really part of the chuck. I have a manual coming for the drill press, maybe I can get a part number from that.

 

[rancherbill]

I need a spanner wrench for a Jacobs 633C 1/2" drill chuck. Collar measures 1.543" outside dia and a .212" dia drill bit goes into the three holes equally spaced radially. This is the best I could find so far from Epstein.

Is this what I need?

http://www.wrighttool.com/pub/defau...sults&t2=Search+Results&d=&catalog=0&search=1

What are you trying to do????

 

[Ign]

It should work. I'd try to fit it to the chuck and then tack weld it to get rid of the slop.

You can get pin and hook spanners and www.use-enco.com as well. Don't see them on sale right now in the Hot Deals but they often are.

 

[Trucky]

The hole pattern.. are they slots or round holes?

Go go mcmaster.com and search for spanner, then click on spanner wrenches, then Type "E". Those are the kind I prefer for chucks with slots (which is most all of them that I've run into).

Either way, mcmaster lists all the relevant info you need to pick the right one.