Outlawmws
Well-known member
Now that is some suckge! I'd love to fined one of those, just because! I'd probably only use it a few times in my life, but the cool factor!...
it's 2013 garage sale season!...
- Thread starter maddawg308
- Start date
Now that is some suckge! I'd love to fined one of those, just because! I'd probably only use it a few times in my life, but the cool factor!...
bmwrd0
Well-known member
Great pull Nine4! On the six point crafty's, are you looing for metric or SAE?
I'll keep an eye out for that 11/16, there are a hand full of Fleet at the pawn shop in the small town down the road.
I need 1/4"-9/16" and 1"up in SAE, in Metric I need them all.
Me either, my eyes are getting bad since I turned 40. I bought my first pair of reading glasses yesterday.
So, what is the Allen machine?Flatintoone
Well-known member
It's a distributor machine, right? For $20, you **** big time!
Outlawmws
Well-known member
^^^ This! Nothing cooler than setting up a distributor and its advance curves before installation!
Outlawmws
Well-known member
OK I FINALLY got back to pics (Crazy week...) of that free pile...
A nut can of Driver bits, a life time supply as well as the odd larger drive bits up front.
ammo pouch, old plug adapters (Non Polarized), old night light, hi pressure hose end, 2 burrs, ez outs, and cutoff wheels
A mirror (cracked), Window scraper, ream, long reach magnet, and another long reach I'll make into something, and a cobbled up hex drive for a yankee driver
Paging Jeff! American locks marked "US" and some have a set no. also marked (None match) most are solid brass/bronze, including the shackle. the smallest one is marked BELL, but I think that is a lock maker and not "Bell Systems"?
the next to smallest pair are marked brother and BR Camel 25, and the single third smallest is an Eagle.
An old Cell Phone, from the late 90's AudioVox for the Airtouch system, (Now part of Verison?) It actually charged up and I'll bet I could get it registered!
And a bunch of test leads and test clips
More to come!
A nut can of Driver bits, a life time supply as well as the odd larger drive bits up front.
ammo pouch, old plug adapters (Non Polarized), old night light, hi pressure hose end, 2 burrs, ez outs, and cutoff wheels
A mirror (cracked), Window scraper, ream, long reach magnet, and another long reach I'll make into something, and a cobbled up hex drive for a yankee driver
Paging Jeff! American locks marked "US" and some have a set no. also marked (None match) most are solid brass/bronze, including the shackle. the smallest one is marked BELL, but I think that is a lock maker and not "Bell Systems"?
the next to smallest pair are marked brother and BR Camel 25, and the single third smallest is an Eagle.
An old Cell Phone, from the late 90's AudioVox for the Airtouch system, (Now part of Verison?) It actually charged up and I'll bet I could get it registered!
And a bunch of test leads and test clips
More to come!
Attachments
SackOHammers
Well-known member
OK I FINALLY got back to pics (Crazy week...) of that free pile...
A nut can of Driver bits, a life time supply as well as the odd larger drive bits up front.
Those large odd looking bits look a lot line the ones that fit my hand held impact tool.
See. The best things in life are free.
Richard Cranium
Well-known member
G_P
Well-known member
Only one sale today.
Got a brand new Senco pneumatic stapler for $2!
Just have to go buy some staples for it.
Tomorrow will hopefully be more productive. Hell I just finished cleaning up last weeks haul.
Sent via carrier pigeon.
Got a brand new Senco pneumatic stapler for $2!
Just have to go buy some staples for it.
Tomorrow will hopefully be more productive. Hell I just finished cleaning up last weeks haul.
Sent via carrier pigeon.
Flatintoone
Well-known member
Are those what I think they are?
Richard Cranium
Well-known member
What are you thinking they are?, Would you like a better pic of some thing? Rich...
jakemac
Well-known member
Not one, but TWO!! Cman 3/8" Speeders !!!!!! For 50¢ !!!!!!
That isn't worthy of a you ****, that merits a you @&#%&%@# !!!!!
Last edited:
Richard Cranium
Well-known member
Yes, two of them, I guess I am wrong, I was most happy with the old craftsman 1/2 ratchet with the pass through bit....Rich.. Did they also make an 1/2 in the center drive ratchet? Rich
Outlawmws
Well-known member
jakemac
Well-known member
No 1/2" or 1/4" drive on the speeders, just the 3/8". And only for about 3-4 years, 1959- 1963. On eBay they go for between $60-$120. If there is a bidding war, it can get up to $150. (please don't ask me how I know. I feel so ashamed)
Richard Cranium
Well-known member
Outlawmws
Well-known member
OK had to side track to watch the end of the shutout. (and dang near a perfect game!)
An Eico bench VOM, (Note the plug, not too portable), and a few spreaders.
A 25w weller soldering pencil, a cheap Taiwan battery tool, combination head, (Homemade?) chisel and something, with a grooving chisel jammed in
A shop built Aluminum drawer
An Aluminum tray that I suspect was made from leftovers and other parts that are shop made. I like this, I don't think it's too practical but I like it!
Old school snake lights I think I can get the working again.
Not tools, but interesting; a book mark and a screwed Oscar??
And that is basically it, the rest are bits and pieces for the "Hardware Store"
An Eico bench VOM, (Note the plug, not too portable), and a few spreaders.
A 25w weller soldering pencil, a cheap Taiwan battery tool, combination head, (Homemade?) chisel and something, with a grooving chisel jammed in
A shop built Aluminum drawer
An Aluminum tray that I suspect was made from leftovers and other parts that are shop made. I like this, I don't think it's too practical but I like it!
Old school snake lights
I think I can get the working again.Not tools, but interesting; a book mark and a screwed Oscar??
And that is basically it, the rest are bits and pieces for the "Hardware Store"
Attachments
Last edited:
Outlawmws
Well-known member
Outlawmws
Well-known member
Richard Cranium
Well-known member
Yes, long C in craftsman and a H in a circle..Rich
So do you know what year that is from?
So do you know what year that is from?
Last edited:
Jarhead0408
Well-known member
Yeeeeeeah, I'm starting to hate you Richard. Big time.
What's that ratchet? Like 1930's right?
Mega suckage going on in central Washington right now.
What's that ratchet? Like 1930's right?
Mega suckage going on in central Washington right now.
Outlawmws
Well-known member
Husky/New Britain, and somewhere between 1931 and 1947
A buck and a half...
Damnit, you ****!
Outlawmws
Well-known member
Thanks! it IS a pretty cool "Something to put things in" I'll have to think that one over...
Outlaw, that round aluminum tray should slide right into a 5 gallon bucket. It's great way to haul drill motor, tools, driver, etc at bottom of bucket and the tray at top full of screws, etc.
That score by Rich for $1.50 is crazy . . . . . gotta love that ROI !!!
That score by Rich for $1.50 is crazy . . . . . gotta love that ROI !!!
Last edited:
rickhigginshtbr
Well-known member
$.50 each... you just won the You **** of the year.
msgtsmithret
Well-known member
DAMN! I haven't seen one of those since the 1970's when I worked in a Chevron station in Boise, ID. Had lots of cool flashing lights like an old depth finder.
Awesome find and maximus suckage!
msgtsmithret
Well-known member
msgtsmithret
Well-known member
Spending the weekend preparing for a move at the end of the month so no yard sales etc for me. LOOK WHAT I'M HAVING TO PASS UP at this estate sale. I couldn't sleep last night thinking about it . . .
http://www.estatesales.net/estate-sales/480126.aspx
http://www.estatesales.net/estate-sales/480126.aspx
madison069
Well-known member
Well, looking at Rich's haul and then finding out my air compressor works but has a hole in the tank made me feel down about my haul....lol
I guess i need to look for a tank now as the compressor and motor works great but i didn't let it build too much pressure due to the tank hole.
I guess i need to look for a tank now as the compressor and motor works great but i didn't let it build too much pressure due to the tank hole.
Jarhead0408 posted that sale in another thread inquiring about the crown top lathe and someone posted in that thread saying the lathe and tooling was listed at $350 and the milling machine was listed as a Clausing Drill Press for $275
http://www.garagejournal.com/forum/showthread.php?t=215274
madison069
Well-known member
My haul,
Air Compressor with a hole in the tank
for $30, should have ran but oh well looking for a cheap tank now.
$8 for these,
$5 for the game system and games,
and I got these hose and paint gun with the air compressor.
Air Compressor with a hole in the tank
for $30, should have ran but oh well looking for a cheap tank now.
$8 for these,
$5 for the game system and games,
and I got these hose and paint gun with the air compressor.
Two planned stops today, then a few just for kicks, glad I took the risk! First tool stop turned up nothing but some Ginsu knives and a wooden car totaling $3.50
Second planned tool stop was a lil better, saw the Craftsman in the box and it was marked $5 whole box, I grabbed it and the Sargent Level and parts washing tray for $9.25 total.
Saw a garage sale sign across the road from the second stop so we headed over. I got this noisy speedaire compressor, box of Popular Mechanics/Sciece from the 60s, Metal Wrench Rack, Crown Top Torque Wrench and Race Car box with two cars inside, all for $20 total.
After that score, I decided to venture out to the Snap On guys house again, saw he posted another ad mentioning tools. Problem is, he is one of the farthest out at 25 minute drive. I get out there and it's a bust, nothing new but HH ****. Boo, leaving there I decide to hit the over priced flea market down the road. I got the Craftsman Driver and Snap On socket for $1
Leaving there and headed home, still feeling the tingle of tools for sale I pass a poster board GS sign that said TOOLS!! I get to the house and there is no one but the seller, some folks leaving. Walking up the drive, I see a big hunk of rust and ask how much, "$70" he says, "It's OLD". I glance, trying not to overly excited and keep walking to the tool table. Nothing much left on the tables so without looking again, I ask if he'll take $50 on the rust bucket, thinking he will meet me at $60... He accepted the $50 and away I walk with my very first Wilton Bullet, to my surprise, it's a 5" Looks as if it has been welded possibly on the rear but it opens and closes smooth and tight.
One final stop near the shop on the way back and I got the lil flex neck lamp for a project for $1.
All in all, a good day sailing for me, hope all you guys make out like bandits too!!!
Second planned tool stop was a lil better, saw the Craftsman in the box and it was marked $5 whole box, I grabbed it and the Sargent Level and parts washing tray for $9.25 total.
Saw a garage sale sign across the road from the second stop so we headed over. I got this noisy speedaire compressor, box of Popular Mechanics/Sciece from the 60s, Metal Wrench Rack, Crown Top Torque Wrench and Race Car box with two cars inside, all for $20 total.
After that score, I decided to venture out to the Snap On guys house again, saw he posted another ad mentioning tools. Problem is, he is one of the farthest out at 25 minute drive. I get out there and it's a bust, nothing new but HH ****. Boo, leaving there I decide to hit the over priced flea market down the road. I got the Craftsman Driver and Snap On socket for $1
Leaving there and headed home, still feeling the tingle of tools for sale I pass a poster board GS sign that said TOOLS!! I get to the house and there is no one but the seller, some folks leaving. Walking up the drive, I see a big hunk of rust and ask how much, "$70" he says, "It's OLD". I glance, trying not to overly excited and keep walking to the tool table. Nothing much left on the tables so without looking again, I ask if he'll take $50 on the rust bucket, thinking he will meet me at $60... He accepted the $50 and away I walk with my very first Wilton Bullet, to my surprise, it's a 5" Looks as if it has been welded possibly on the rear but it opens and closes smooth and tight.
One final stop near the shop on the way back and I got the lil flex neck lamp for a project for $1.
All in all, a good day sailing for me, hope all you guys make out like bandits too!!!
Flatintoone
Well-known member
nice, nine4!
Blackmarket
Well-known member
Great score 94 on the vice!
rickhigginshtbr
Well-known member
nice finds so far guys! Taking the day off, we'll see what happens tomorrow.