Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Buckgnarly
Well-known member
Askme42
Well-known member
I cleaned up this Xmas. Will start with this.
priceman1414
Well-known member
Jawn
Well-known member
Dang, that is down right beautiful. Very clean, not too flashy, lots of thin drawers and finally something besides green on a new box. Enjoy it.
The caster centers on the new boxes always crack me up. Bling bling.
That is a nice jack, I've used one quite a bit, I think you will really enjoy it.
MF'er
Well-known member
My Christmas haul:
My wife rules.
My wife rules.
Jawn
Well-known member
My Christmas haul:
(pic not quoted)
My wife rules.
I guess she shopped at Epsteins. Nice.
Hey MF,
Is that an Epstein's order? Sure looks like it with that Mora knife. I bought two of the utility ones with the red handles, one for me, one for a gift. Hell of a knife for like $6. Sharp as heck. Should hold an edge well too.
Cheers,
JimDon
Is that an Epstein's order? Sure looks like it with that Mora knife. I bought two of the utility ones with the red handles, one for me, one for a gift. Hell of a knife for like $6. Sharp as heck. Should hold an edge well too.
Cheers,
JimDon
Buckgnarly
Well-known member
My Christmas haul:
My wife rules.
Part number for that straight (90degree) cotter pin puller?
warmpancakes
Well-known member
Mine? 5341.00 after trade in 7341.00 before trade in
rshadd
Well-known member
Weller WESD51 Soldering Station. Made in Mexico.
Last edited:
Vegaman_Dan
Well-known member
Picked up an old classic buzzbox welder, the Miller Thunderbolt 225. I only have MIG welders, so a chance to have a stick welder came up and I jumped on it for the auction price of $50. I expect it will work- these old things were pretty bulletproof. I need to get some leads for it next. Also the dial for the current display only goes up, not back down, so the connection between the crank and the display might be need some work.
Not bad though. Big ol' heavy brick.
Not bad though. Big ol' heavy brick.
Does it actually work?
Seriously though, Weller products made in Mexico have a much higher DOA/short lifespan than they should. Just take a look at the reviews on Amazon.
That said, I actually have a Weller WD1 system (WSP80 & WMP irons w/ stop-n-go stand). So far, so good. But opening it up and looking around, it's obvious there were corners cut, even on this unit which is a German made model (i.e. power board from Asia).
Champ1017
Member
Midwest snips and Klein Stubby 8in1 screwdriver
https://scontent-a-sjc.**.fbcdn.net/hphotos-frc3/1483338_10200398371361487_2122009222_n.jpg
https://scontent-a-sjc.**.fbcdn.net/hphotos-frc3/1483338_10200398371361487_2122009222_n.jpg
Fedwrench
ALLIANCE MEMBER
Wilde 566Z radiator hose pick, $5 Epstein's.
sparksftball69
Well-known member
- Joined
- Sep 8, 2013
- Messages
- 116
Got all of this for a little over 35.00 out the door.
kunkernator
Well-known member
I have heard VERY good things about those "heavy duty removal" torx sockets. I really would love a set of those, and metric Allen sockets. Enjoy!
FOCUS.FREAK
Well-known member
daddy2coull
Well-known member
Jees. In the uk the cheapest epiq is $16000
MF'er
Well-known member
Originally Posted by Buckgnarly View Post
Part number for that straight (90degree) cotter pin puller?
That would be it.
http://store.harryepstein.com/cp/RadiatorHoseTool/566Z.html
Part number for that straight (90degree) cotter pin puller?
That would be it.
http://store.harryepstein.com/cp/RadiatorHoseTool/566Z.html
MF'er
Well-known member
Epstien's, and the Williams screwdriver set from Amazon. You're right, that's a lot of knife for the price.
http://www.amazon.com/dp/B002NH5F30/?tag=atomicindus08-20
Double J
Well-known member
Gear wrench Serpentine belt removal tool
Wiha 40 piece kit
Wiha 40 piece kit
illmatyk
Well-known member
Gear wrench Serpentine belt removal tool
I have that same serpentine belt removal kit, really great investment!
jrsmyd
Active member
These came in today.
Nice streamlight, I have a Stinger LED what is the diference between mine and the XP you just picked up? I can tell the cone is larger is that all?
My snap on guy came today. Warranted my old red blue point vice grips that I stripped the teeth out on and I got brand new snap-on ones. Bought a new air hammer and he threw in his last set of steak knives. He had one left stashed at home and knew I wanted one, brought it today just for me and had a couple different options of what to buy to throw it in on. Went with the air hammer. Main other option was a good set of left handed bits with extractors. He admitted they go on sale next month so I will get them then. Also made him throw in a little truck clock that are supposed to go with the extractors next month.
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
My snap on guy came today. Warranted my old red blue point vice grips that I stripped the teeth out on and I got brand new snap-on ones. Bought a new air hammer and he threw in his last set of steak knives. He had one left stashed at home and knew I wanted one, brought it today just for me and had a couple different options of what to buy to throw it in on. Went with the air hammer. Main other option was a good set of left handed bits with extractors. He admitted they go on sale next month so I will get them then. Also made him throw in a little truck clock that are supposed to go with the extractors next month.
PA Woody
Well-known member
I get the willies thinking of someone using one of those knives as a wrench and using the blade as the handle. Ouch!
Ouch!jgreen-fsi
Well-known member
Tooltopia.com delivered today
Tooltopia.com delivered today
Dude tooltopia is insane, i ordered from them midnight est sunday, got 3 of the tools at 10am that was a 34 hour order to delivered turn around. I'll probably get more tomorrow. Hell last time I ordered it was 1am ish 1 pack of tools delivered like 31 hours later at 8:30am the second half the next morning at 8:30am.
Anyway Kinda lazy to take pics(I need just to do a whole thread on my toolbox, never finished my thread from 3 years ago), but today i got a atd 1/4" mini straight die grinder, air saw, and IR ARO 3 in 1 filter/regulator/lubricator for my air line at work.
Fedwrench
ALLIANCE MEMBER
The dude in purple (Fedex) dropped off some PROTO goodness from Trident-Supply to me today in the form of their new 8 piece combination screwdriver set with the new hard quadlobal handles. I think these will quickly become my new favorite scrwedrivers.
I also got a PROTO 1/2 drive impact wrench.
Both of these tools are also available in red from Mac.
I also got a PROTO 1/2 drive impact wrench.
Both of these tools are also available in red from Mac.
Attachments
The dude in purple (Fedex) dropped off some PROTO goodness from Trident-Supply to me today in the form of their new 8 piece combination screwdriver set with the new hard quadlobal handles. I think these will quickly become my new favorite scrwedrivers.
I also got a PROTO 1/2 drive impact wrench.
Both of these tools are also available in red from Mac.
Keep us updated on those drivers. You are the first i seen with them.
Tarheelgarage
Well-known member
The dude in purple (Fedex) dropped off some PROTO goodness from Trident-Supply to me today in the form of their new 8 piece combination screwdriver set with the new hard quadlobal handles. I think these will quickly become my new favorite scrwedrivers.
I also got a PROTO 1/2 drive impact wrench.
Both of these tools are also available in red from Mac.
That Proto impact looks like the Mac (or Matco) 1/2 impact they've released within the past year or so....
archirelic
Well-known member
The dude in purple (Fedex) dropped off some PROTO goodness from Trident-Supply to me today in the form of their new 8 piece combination screwdriver set with the new hard quadlobal handles. I think these will quickly become my new favorite scrwedrivers.
I also got a PROTO 1/2 drive impact wrench.
Both of these tools are also available in red from Mac.
Part # on that Proto set?