Found a deal on craigslist? - List Here!

[brianchevy]

I am seeking a glass bead blasting cabinet and this one looks just the price -- in wonder if anybody here has any thoughts about it. I need to blast smallish metal parts for our restorations and i think blasting with walnuts / pecans and glass beads might be the best...

Used: $75
Place: Knoxville, TN
ITEM: Used Bead blasting cabinet.
http://knoxville.craigslist.org/tls/4236783852.html

 

[CudaChick1968]

Brian, that's just a very small tabletop model and they're only about 20 inches wide -- if small parts are all you're going to use it for then it'll be fine, but investing in a bigger one will probably make you happier in the long run since you're presumably working on car parts. (A V8 intake manifold won't even fit in there.)

Glass bead and walnut/pecan shells produce a nice "soft" finish, but if you're going to be removing old paint and rust check into getting some Black Beauty slag in a fine grit. I pay $16.50 for 100 pounds locally.

 

[voetsek]

http://www.govdeals.com/index.cfm?fa=Main.Item&itemid=517&acctid=3394

I bet those Vidmar cabinets are going to go cheap. They're ~$170 each now, but you have to buy 38 of em.

 

[CNGsaves]

http://www.govdeals.com/index.cfm?fa=Main.Item&itemid=517&acctid=3394

I bet those Vidmar cabinets are going to go cheap. They're ~$170 each now, but you have to buy 38 of em.

Dayuuuuum !!! Those are in pristine condition. 38 Vidmar cabinets being sold by:
. . . . . . US Postal Service in Portland, OR
. . . . . . .715 NW Hoyt St

Any GJer in that area willing to setup GJ Group Buy ???
Someone SHOULD go inspect them in person and see if they really are that perfect. Even $250 a piece would be a great deal.

Those would be dream setup for a new 40'x60' shop.

 

[Karl_B]

I saw this and thought it might interest someone.

Region: Amarillo, TX

Location: Amarillo

Item: US General 42" tool box

Price: $200

Link: http://amarillo.craigslist.org/tls/4277092260.html

 

[JeremyBurke]

http://www.govdeals.com/index.cfm?fa=Main.Item&itemid=517&acctid=3394

I bet those Vidmar cabinets are going to go cheap. They're ~$170 each now, but you have to buy 38 of em.

I'm local and would be happy to be the local agent if someone needed that. I only charge a 3 box fee. It's a great deal. Wish I had the cash and space to pull that off.


My dream is to one day be as funny as I think I am.

 

[bczygan]

Vintage Lube Machine and cart

Marine City, MI

$60

http://detroit.craigslist.org/mcb/tls/4260632429.html

 

[mrbreezeet1]

http://akroncanton.craigslist.org/tls/4258018083.html

Rockwell/Delta 12" wood lathe - $450 (Carrollton)
Like we had in HS shop

 

[mrbreezeet1]

why is everything always so far away?
$150 for this delta sander on stand,
4 1/2 hours. If it was an hour, I would be PP payment.
http://toledo.craigslist.org/tls/4283196119.html

 

[mrbreezeet1]

Same seller, this sucker is nice too...... Delta long bed
Heavy duty jointer - $250 (Wauseon)
http://toledo.craigslist.org/tls/4283194466.html

 

[Itinerant]

Not Craigslist but KSL.com classifieds.

Region: West

Location: Salt Lake City

Miller Synchowave 200 TIG welder, $800 OBO

http://www.ksl.com/index.php?nid=218&ad=28325393&cat=&lpid=&search=miller&ad_cid=3

 

[mtnwkr]

http://seattle.craigslist.org/sno/tls/4282672568.html

Craftsman Industrial Rated Bench Grinder. 7" - 3/4HP. Like new condition.

$50 call or text (206)459-9951

 

[mrbreezeet1]

why is everything always so far away?
$150 for this delta sander on stand,
4 1/2 hours. If it was an hour, I would be PP payment.
http://toledo.craigslist.org/tls/4283196119.html

the sander has sold, I had to call him back, I left a message, but again, they get there money, they don't have the courtesy to call back.

 

[tool_scrounge]

Location: Thousand Oaks, California (just north of LA)

Logan metal lathe with collet holder (so it appears) $350

http://ventura.craigslist.org/tls/4284669807.html

 

[mrbreezeet1]

Location: Thousand Oaks, California (just north of LA)

Logan metal lathe with collet holder (so it appears) $350

http://ventura.craigslist.org/tls/4284669807.html

damm good price, QCGB too!

 

[uniballer]

http://roanoke.craigslist.org/tls/4216472780.html

 

[uniballer]

http://roanoke.craigslist.org/tls/4283458526.html
400 dollar snap on box with tools!

 

[zkling]

http://roanoke.craigslist.org/tls/4283458526.html
400 dollar snap on box with tools!

I don't think the tools are included.

i have a good used snapon tool box thats about 8 foot tall with lid open and it has wheels made on bottom to roll and it locks the drawyers it needs to be cleaned as its dusty and needs cleaning i rate it a 8 on a scale of 1 to 10 its a used box so dont expect it to be new . these snapon boxes sell very high and im willing to sell for a very good price if intersted please ask questions or send contact info thank you

I also had to laugh at the 8/10 rating. Really?

 

[SeattleKent]

http://roanoke.craigslist.org/tls/4283458526.html
400 dollar snap on box with tools!

Nice find. I would go $400 for those.

The first thing I noticed in the picture, though, was the PVC compressed air piping. Owner is not the sharpest pencil in the box.

 

[mrbreezeet1]

Nice find. I would go $400 for those.

The first thing I noticed in the picture, though, was the PVC compressed air piping. Owner is not the sharpest pencil in the box.

Yeah, Thats not bad at all. (Price on the box..........)

 

[1Garageman]

Damn this is tempting!

http://columbus.craigslist.org/tls/4282448866.html

7 horse 60 gallon air compressor - $250

 

[brianchevy]

Nice find. I would go $400 for those.

The first thing I noticed in the picture, though, was the PVC compressed air piping. Owner is not the sharpest pencil in the box.

Tools NOT included. I wrote the seller and they replied "tools sold seperately" -- OTHERWISE I would be on the road today to pick that deal up...

 

[BD1]

This is gonna be gone soon .Quincy 80 gallon 5 HP two stage up right cast iron air compressor 220 electric asking $700 or best offer also have husky 26 gallon 1/2 hp up right compressor 110 electric asking $175 or best offer call 17087028102.

quincy 80 gallon air compressor - $700 (sandwich ill)

http://chicago.craigslist.org/wcl/tls/4288025235.html

 

[daparrothead]

This is gonna be gone soon .Quincy 80 gallon 5 HP two stage up right cast iron air compressor 220 electric asking $700 or best offer also have husky 26 gallon 1/2 hp up right compressor 110 electric asking $175 or best offer call 17087028102.

quincy 80 gallon air compressor - $700 (sandwich ill)

http://chicago.craigslist.org/wcl/tls/4288025235.html

If I had run across a quincy like that for that price I would have been all over that instead of buying the new one I just bought.

 

[uniballer]

Nice find. I would go $400 for those.

The first thing I noticed in the picture, though, was the PVC compressed air piping. Owner is not the sharpest pencil in the box.

Just noticed when I saw your post. I emailed him with no response. Hope I dont get spam!

 

[riggs1117]

http://youngstown.craigslist.org/tls/4289023050.html

new milwaukee 3 bay battery charger for 50 bucks

 

[frankush]

Milwaukee bench grinder. Been listed for at least a week. Probably a 6 inch and I don't see eye shields. I have one of these. USA made and very smooth. Might be worth a look.

http://chicago.craigslist.org/sox/tls/4282025052.html

 

[BD1]

This is gonna be gone soon .Quincy 80 gallon 5 HP two stage up right cast iron air compressor 220 electric asking $700 or best offer also have husky 26 gallon 1/2 hp up right compressor 110 electric asking $175 or best offer call 17087028102.

quincy 80 gallon air compressor - $700 (sandwich ill)

http://chicago.craigslist.org/wcl/tls/4288025235.html

Quincy is sold.

 

[INYER face hole]

Some pegboard displays. $50 ea. or all 3 for $100
http://memphis.craigslist.org/tls/4277461440.html

 

[jonti48310]

SO toolbox. Looks a little rough but at $50 it's a nice little winter project for anybody in the Fayetteville area.
http://fayar.craigslist.org/tls/4292256890.html

 

[upgrading]

SO toolbox. Looks a little rough but at $50 it's a nice little winter project for anybody in the Fayetteville area.
http://fayar.craigslist.org/tls/4292256890.html

Seems like a real good price to me.

 

[Pinhook]

http://greensboro.craigslist.org/tls/4292383454.html

$75 dollars for a Harbor Freight 5 drawer ?

I'd buy it if it wasn't a busy saturday and about that much in fuel.

 

[mrbreezeet1]

http://greensboro.craigslist.org/tls/4292383454.html

$75 dollars for a Harbor Freight 5 drawer ?

I'd buy it if it wasn't a busy saturday and about that much in fuel.

good deal if it was local to you.

 

[Pinhook]

good deal if it was local to you.

looks like it is already gone.

 

[gtermini]

Snap On MG1250 3/4" dr impact brand new $350

I'd be all over it if it wasn't almost 6 hrs round trip. That blows the bargin for me.

http://seattle.craigslist.org/oly/tls/4289751344.html

Greyson

 

[mrbreezeet1]

http://pittsburgh.craigslist.org/tls/4294149337.html
Craftsman Tablesaw $100.00
Has upgraded fence.

 

[JazRedGT]

For you Florida guys!!

http://miami.craigslist.org/pbc/tls/4287307061.html

$85 Matco Box vintage

 

[bczygan]

Neon "OPEN" Sign $40 Oakland Co. , MI

http://detroit.craigslist.org/okl/tls/4294459755.html

 

[mrbreezeet1]

For you Florida guys!!

http://miami.craigslist.org/pbc/tls/4287307061.html

$85 Matco Box vintage

Nice box, It's worth $85.00

 

[upgrading]

For you Florida guys!!

http://miami.craigslist.org/pbc/tls/4287307061.html

$85 Matco Box vintage

People are lucky down there.
Nice box.
Nicer price.

Nice one down on the R.I. coast.
A little pricier though.

Matco rolling tool chest - $200 (charlestown)

http://providence.craigslist.org/tls/4296204992.html