Show your new tool arrivals

[steavie]

few new bits i have added since !





still waiting for 3/8 7.2v gun and some green cases for that and the 1/4 drive. dose any one know if i can change the case on the 18v 3/8 gun???

 

[jmscollinsiii]

Aren't most of SO's plastic boxes made by Plano or one of the other plastics big names, anyway? That organizer is nice, but not 130 bucks nice (if ordered from SO), IMO.

I wanted one too and thought the same thing when my driver gave me the price. I went to home depot tonight and picked up a 3 drawer one for $12. Gotta put some snap on stickers on it now.

 

[Hopalong604]

I like using the long pick to get to the heater core hoses by the firewall. But be carefull using these picks, my coworker poked a hole in a hose he was trying to remove

Nice!! I just got the same set in green the other week. Already used the shirt one a lot. The long one I haven't touched yet


Sent from my iPhone using Tapatalk

 

[90zcar]

Same here. Well almost. I thought I jabbed it under the hose but I stuck it in the end. Only about a cm before I realized what I did


Sent from my iPhone using Tapatalk

 

[John in OH]

Hehe, as it is right now, it is useless. I need to get a couple of faces to put on it:
http://www.facom.com/Facom/webcatalogue/facom/fiches-produit/sku_html/en/207A-32CB_en.html
http://www.ultimategarage.com/shop/part.php?products_id=4535

Figures! Leave it to the French to design a useless hammer!

 

[Coolguy83]

few new bits i have added since !







still waiting for 3/8 7.2v gun and some green cases for that and the 1/4 drive. dose any one know if i can change the case on the 18v 3/8 gun???

How do you like the 3/8 gun ?

 

[Scottwi]

I picked up this spindle (router) along with the CNC table!

 

[daparrothead]

Picked up my new Quincey 60 gal compressor yesterday, started getting the regulator & dryer mounted this afternoon. Will be wiring it up tomorrow and hopefully have it running.

 

[steavie]

How do you like the 3/8 gun ?

have only had it one week been great so far i thought would be very unbalanced as i used a 18v on my 14.4v old style gun and that was, but its great!

 

[Fireball027]

I just bought this yesterday. It has a 5.5mm light head, so it is great for small spaces. Princess auto had them on for $100.

 

[Antique Engine]

I just bought a couple of things, mainly out of nostalgia. When I was young and my father was teaching me the craft, we used a set of wrenches like these. I collected these from a few various cheap eBay auctions. They're all made is USA, but some are -v- code and some are -vv- code. I don't care since they all match and lay in the rack nicely next to each other.

And this one is another nostalgia buy. My dad had one when I was younger. I have a bunch of nice and high dollar SnapOn, Mac, and SK ratchets, but these little S-K Wayne 1/4" guys are the most enjoyable for me to use.

 

[kiatech]

The clerk gave me a dirty look when I didn't tip him.

 

[Travisnd]

My new 7 drawer Channellock toolbox to store all of my blue goodies in!!

 

[upgrading]

Excellent.

 

[KAOTIK Motorsports]

GP (Grey Pneumatic) - 1/2" drive 12 point shallow impact sockets

Snap On screwdriver set with FREE mini screwdriver set

 

[Chadwilliam1]

Picked up my new Quincey 60 gal compressor yesterday, started getting the regulator & dryer mounted this afternoon. Will be wiring it up tomorrow and hopefully have it running.

Awesome!

 

[FOCUS.FREAK]

32oz ball pein hammer for HE and a replacement craftsman pry bar that I lost.



Sent from my SPH-L720 using Tapatalk

 

[Wrapitinbacon]

Recent grabs.

 

[jrodc455]

Grabbed these from HD for $6

Sent from my HTC One using Tapatalk

 

[camoguy]

Grabbed these from HD for $6

Sent from my HTC One using Tapatalk

How do you like those? How much play is in the jaws? I may go check my HD tomorrow at lunch time.

 

[cburnscrx]

How do you like those? How much play is in the jaws? I may go check my HD tomorrow at lunch time.

Reviews on Home Depot say they're pretty sloppy, but for $6...

 

[jrodc455]

How do you like those? How much play is in the jaws? I may go check my HD tomorrow at lunch time.

The jaw does wiggle a good bit. But they seem pretty good for $6. Open and close super fast. I'm sure they'll serve well for around the house and what not.

 

[camoguy]

Reviews on Home Depot say they're pretty sloppy, but for $6...

Yeah... I was just checking out the reviews, they are pretty mixed, some say sloppy, some say good. I guess that's to be expected. I may go buy a set and if they aren't good, I'll give them to my teenager. Ha ha...

 

[Cyclones6]

Not much, but I picked up a pair of 7 inch quick release vise-grips from the clearance section at Menards for $9. Seem to grip much tighter than the older original ones I have.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[durallymax]

Fluke 88V auto kit and a set of load pro leads. Also got a Fluke IR thermometer not shown in the pic.

 

[Carves]

Supported the asian manufacturing businesses today.

Needed a coupla replacement spanners ....

hmmmm ... made in taiwan with what used to be - an aussie brand, stamped on it ... for $25 ???

nahhh ... I'll have two - of the taiwanese ones with the canadian brand ... for $25 ..

Ohhhh ... and the 1/4 drive gearwrench ratchet with the wobbly head - coz it might be useful.


Socket rails were cheapo chinese ones at another store,


... and the overpriced Lufkin just happened to be laying on the bench when I took the photo ..

 

[Hako86]

Not really a tool arrival, but I got this a little while ago for my b day from my grandma. Used it for the first time yesterday and it works awsome! 1/4 drive 6-30nm torque wrench

 

[djwyman]

UPS man just dropped off my new set of 1/2" deep metric Snap-on sockets.

Sent from my Nexus 4 using Tapatalk

 

[90zcar]

Just got this today in the mail. Buy it now free shipping $54.99
Guy has all 3 colors. Brand new

Snap-On 32oz dead blow ball peen


Sent from my iPhone using Tapatalk

 

[NastyN8]

Just got home with this husky c601h. Remanufactured-$366. Have to love unexpected purchases!

http://m.homedepot.com/p/Husky-60-Gal-Stationary-Electric-Air-Compressor-C601H/203187350/

 

[Travisnd]

Had points to use plus a gift card and picked this up!

 

[shamrock12]

My Trusty Hammers order just arrived today

 

[shamrock12]

Recent new arrivals of Lang Tools. After the last job which involved the removal of several hoses, I certainly wasn't going to allow myself to be unprepared the next time by

Oh, all of these are USA made to boost

 

[SC-AW11]

Just got this today in the mail. Buy it now free shipping $54.99
Guy has all 3 colors. Brand new

Snap-On 32oz dead blow ball peen


Sent from my iPhone using Tapatalk

Link? Can't find them

 

[90zcar]

Hmm weird. He had a bunch on. Look up johnlarry
That is the seller. Email him. He said he got an entire buyout of them


Sent from my iPhone using Tapatalk

 

[Tech89]

Ernst socket organizers. Have a few other socket trays on the way that haven't shown up quite yet too.

-Pat

sent from somewhere in Minnesota...

 

[Caparris]

Ernst socket organizers. Have a few other socket trays on the way that haven't shown up quite yet too.

-Pat

sent from somewhere in Minnesota...

You'll love those. Or I do anyways. I put all my oddball stuff, torx, e torx, etc on that 3 rail setup then regular sockets on individual rails based on long/short/metric/sae/drive

I've never had one fall off and I just throw the sets in the trunk of my car usually

 

[north]

My Koken 3/8 breaker bar bought on Rakuten from tuzukiya.

Cost was 3076 yen + shipping (EMS) at 1800 yen.

The bar is 15" long, uses a pin in the head and has a ball and spring with detents at zero and 90 degrees. Comfy handle grip that is a little beefier than Snap-on.

 

[rmsg0040]

Trying to decide if this adapter set is a gimmick or not?



Got this bolt extractor set from Canadian Tire for around $22, from the looks of it, it is quite similar to Irwin extractor set 54113

 

[warmpancakes]

Trying to decide if this adapter set is a gimmick or not?



]

Kinda I have a set, dont use it too often but iys saved my *** 1-2 times