Show your new tool arrivals

[Moose-LandTran]

Kobalts version of the robogrip?

They are pipe ferrule crimping pliers.

 

[ClimberD]

Knipex snap ring pliers

 

[Mazdaspeed]

Snap-on rethreader set...first snap on tool I've bought brand new because ironically I found it cheaper than the other sets out there.

ATD Underhood Light as well:

 

[fhemm20]

Snap-on rethreader set...first snap on tool I've bought brand new because ironically I found it cheaper than the other sets out there.

ATD Underhood Light as well:

I have that light. It is awesome.

Sent from my SAMSUNG-SGH-I847 using Tapatalk 2

 

[Ahicksv]

UPS just dropped off my new FRL, got it on the IR outlet website for $17 with free shipping!

Have a link to this item on outlet?

 

[Chadwilliam1]

This set is for under my seat.

I could have used this the other day.

I have wanted these for a while. I figured why not.

Sent from my HTC Rezound using tapatalk.

 

[AndrewH]

Have a link to this item on outlet?

Here ya go:

http://shop.ingersollrandproducts.com/aro-frl-combination-unit-cmbtn-1500srs-npt-c38221-610.aspx

The picture is not correct but they mention that. The version I got was 1/4 NPT, I only have a 20 gallon compressor so 3/8 or 1/2 are unnecessary. If you browse the site you can find one tailored to your setup.

Andrew

 

[Tarheelgarage]

New Snappy 1/2 drive breaker bar SHBB24 off the tool pimp's truck today.

From Amazon, Sir Tools 50 pc mini Driver MasterSet ST9010
Armstrong 3/8 drive 3 piece impact locking extension set 19-940

OTC Scanner 3109N via Amazon to replace an older Actron CP9575 that had gotten damaged in the shop. This little scanner can do graphing of PIDs and even reads &displays Mode 6 data in hexidecimal. This is quite unusual for such a low priced scanner ($80) along with live data and Monitor readiness. I use this type of scanner to pull quick codes before pulling out the big gun scanner and getting down to business. I recommend this scanner for anyone wanting a scanner than can also read OEM powertrain codes along with Generic OBD2. This is OTCs latest update of this scanner with more features than the previous 3108 version that have sold for many years.

 

[fourtythree]

Some bargains from last weekend. I immediately regretted the shop light as soon as I turned it on.

 

[rmsg0040]

New Snappy 1/2 drive breaker bar SHBB24 off the tool pimp's truck today.

From Amazon, Sir Tools 50 pc mini Driver MasterSet ST9010
Armstrong 3/8 drive 3 piece impact locking extension set 19-940

OTC Scanner 3109N via Amazon to replace an older Actron CP9575 that had gotten damaged in the shop. This little scanner can do graphing of PIDs and even reads &displays Mode 6 data in hexidecimal. This is quite unusual for such a low priced scanner ($80) along with live data and Monitor readiness. I use this type of scanner to pull quick codes before pulling out the big gun scanner and getting down to business. I recommend this scanner for anyone wanting a scanner than can also read OEM owertrain codes along with Generic OBD2. This is OTC latest update of this scanner with more features than the previous 3108 version that have sold for many years.

That's funny, the tool pimp, I guess he will put you work then take your money

 

[Deskmechanic]

Just got my hammers from the Vaughan sale. I gotta say I'm not really impressed with the finish, but they are hammers after all.

Got the biggest (48 oz) and the smallest (2 oz) BPs they make. The big one is for king pins and the little one for stainless trim restoration.

 

[rlebroke51]

What brand is that one I don't recognize the green paint.

they are ari hetra (I think that's how its spelt)

 

[cotjocky]

Been hem hawing on it for awhile. Finally decided to get it today.

Picked up a Fuel Pressure Test Kit off the truck today as well (EEFI500CORE).

Picture is from the Snappy site. Mine is just like this, but minus all the extra fittings.

 

[Audiocrazy28]

Zero offset metric set.

 

[Zeroek]

Got a set of Kobalt Wrenchs for like $22 at Lowes yesterday. Had to buy them separate though. They were like 2 to 3 bucks a wrench on clearance.

 

[90zcar]

Zero offset metric set.

Price???


Sent from my iPhone using Tapatalk

 

[Audiocrazy28]

Price???

I paid $185 for the set. Not a smoking deal. But I have wanted a set for a while now. Only ones I kept seeing had some offset.

 

[Caparris]

Matco's. 12 bucks for the 10" I'm waiting for some shorter ones to come in.



Snap on was suppose to have ordered me some after I bought the ratchet and socket combo but hes never showed back up...

I use the ernst twist lock ones, love them. Got them on amazon


Sent from my iPhone using Tapatalk

 

[AndrewH]

Just received 2 pairs of NOS Made in USA 11" Locking Clamp w/ Swivel pads from an Amazon seller!

 

[BlksnshN]

Snap On guy was giving away some free stuff with purchases today.

https://scontent-a-ord.**.fbcdn.net/hphotos-ash3/t1.0-9/1521207_775883455756744_123526358_n.jpg

 

[Caparris]

Snap On guy was giving away some free stuff with purchases today.

https://scontent-a-ord.**.fbcdn.net/hphotos-ash3/t1.0-9/1521207_775883455756744_123526358_n.jpg

For what they charge he should probably be giving away special "favors" while he's at it

 

[powerstroker]

Decided to bite on the bogo prybars and hammer this week. He tossed in some shirts too.


Sent from my iPhone using Tapatalk

 

[Nephronracing]

Rear brake line rusted out on the H2 last night and I didn't have a full kit.

 

[chipper]

Picked up this IR hammer for $20 from Lowes it was an old display not the best but way better then the old CH I've been using for years

 

[top drive]

Trend anglefix - put the red arms paralel with your walls and the silver blade gives you your half angle mitre cut. My walls are as square as nothing on toast and i have alot of mitring to do.

Sealey thread restore kit for metric , unf and unc.

All because i was screaming for a thread file all last weekend to clean up a flare union on my trucks pas rack to get it back on the road. Couldnt find one to buy steal or borrow over the weekend so bought this set off ebay since it wasnt much more than a metric + imperial thread files on their own and then mentioned it to a tech at work who let me borrow onenlast night so much trucks rolling again.

 

[nickjj]

Snap-on ratchet screwdriver with free torx bits and holder:

 

[the.wong.kid]

Snap on far7200 air rachet

Sent from my SCH-I545 using Tapatalk

 

[ladrones]

Sent from my iPhone using Tapatalk

 

[MonoxieChild]

Kobalt tool cart for $71 on clearance at lowes.

Kobalt tristed 8mm, 12mm, and 14mm wrenches on clearance for $2.05 up to $2.53, And a 6 pack of Kobalt metric shorty wrenches for $4.50 all from Lowes.

Stopped by a Re-Store that ive always seen just t check it out. Ended up with two heavy duty hanging metal cabinets ill use to store my repair manual instead of the current cut down door i use as a shelf currently. These were $5 a piece.

I found a small selection of brand new Kobalt tools there also surprisingly. Grabbed a 12mm wrench for $3, and a 3/8th's extension for $4.

 

[trpearcy]

New Snap On Tools, and a used Blue Point air drill.

^^^^
In that pic I got the lower set on the tray. Impact, 1/2 drive, SAE set.

 

[powerstroker]

Is that gold heavy duty torx bits? What do they run?


Sent from my iPhone using Tapatalk

 

[canuckian]

Latest package from Warmpancakes .... As usual packed to survive a nuclear blast!

And some shiny bits

 

[warmpancakes]

Nuclear blast is almost as bad as the USPS

 

[The Ratchet Man]

Latest package from Warmpancakes .... As usual packed to survive a nuclear blast!

You'll like those Larry lights. I got 2 green ones I use all the time. They are crazy bright for their size.

 

[Mr.3-5-7]

New Compressor for the home garage

Untitled by gjktaylor, on Flickr

Some goodies from the candy truck. I bought just the screwdriver body because i already had enough batteries and a charger.


Untitled by gjktaylor, on Flickr

 

[canuckian]

Nuclear blast is almost as bad as the USPS

I dunno if its the USPS or Canada post but I've gotten some pretty mangled boxes from across the border over the years!

You'll like those Larry lights. I got 2 green ones I use all the time. They are crazy bright for their size.

Already used one last night. Crazy bright and the magnetic clip came in handy as well. At $13 each its money well spent I figure!

 

[Nanashi]

I dunno if its the USPS or Canada post but I've gotten some pretty mangled boxes from across the border over the years!


Already used one last night. Crazy bright and the magnetic clip came in handy as well. At $13 each its money well spent I figure!

Where are they $13 a piece?

 

[canuckian]

Seller is safetytreesupplies on eBay. Just checked and it seems like they put the price up to $14.39

 

[trpearcy]

Is that gold heavy duty torx bits? What do they run?

It's 148 I think...Something around there, for the whole set. They're on sale this month also. Normally 179

 

[jim1987]

New Snap On Tools, and a used Blue Point air drill.

^^^^
In that pic I got the lower set on the tray. Impact, 1/2 drive, SAE set.

Sorry to quote all the pics but is that the 56" box? And is the snappy a sll80 or fll80?