Show your new tool arrivals

[FOCUS.FREAK]

Matco LED light with magnet on the bottom. It's strong as **** and bright. 50 bucks. Flier sale. A buddy had this attached to a bus exhaust and it made it back from its route! Still intact.


Sent from my SPH-L720 using Tapatalk

 

[1foxracing]

Today's new arrivals and still 1 more delivery to come.

The 1/2" deep impact sockets are Snap On and I have them for sale locally right now. When they sell they will replaced with the equivalent Wright Tool models.

 

[SuperSheep]

Armstrong MAXX 3/8 Locking Flex Ratchet and MAXX 3/8 Ratchet
Gearwrench Gearbox XL in 17, 10 and 11 mm. And some GreenLee Stubby Screwdriver.

My favoriate Wera Joker Wrenches 11pc Metric in roll up pouch. And nicest set of ratchet wrenches I currently own.

Sunex 3/8 Universal Impact Sockets Set.

Grey Pneumatic 1/2 Universal Impact Socket Set

Grey Pneumatic 3/8 Duo-Socket Set

Nobody told me this tool-collecting thingy is comparable to a crack cocaine habit......

 

[The English Hacker]

Two new Wiha screwdrivers:

Sent from my HTC One using Tapatalk

 

[cadavjo]

I'd say so. Sometimes u need a 56" pry bar to get those freewheel cogs off ya know!


Sent from my iPhone using Tapatalk

I heard that.

 

[rshadd]

I picked up a new sprayer for the garden hose today. I like the thumb control.



I was surprised to see that Gilmour is now owned by Bosch.


Good warranty too.

 

[rmsg0040]

New socket tray from lowes:



Which helped me clear up my toolbox a bit:



Better organized:



Strong enough to hold vertically with nothing falling off:



Pegs are interchangeable allowing you to set them however you want. Worth the money IMO

 

[Chadwilliam1]

My new 3/4 SK ratchet 85 shipped off eBay.

Sent from my HTC Rezound using tapatalk.

 

[AKOeuro]

104 pc Craftsman mechanics tool set. for $39 Originally $99

 

[GortonsFisherman]

M12 Fuel Hackzall

 

[cadavjo]

New socket tray from lowes:

Can you measure it and give me the dimensions? Is that handle removable? And, do you know if you can purchase additional pegs?

 

[SteveCh]

Can you measure it and give me the dimensions? Is that handle removable? And, do you know if you can purchase additional pegs?

Looks to me from the photo a guy could just cut off that handle if he didn't want it.

 

[cadavjo]

Looks to me from the photo a guy could just cut off that handle if he didn't want it.

Yeah, I was just hoping it was a D handle that could be spread and removed or replaced at will

 

[92integra]

super sheep you are going to love those duo sockets!

 

[Zeroek]

Dear god those Wright sockets are for real!~

 

[rmsg0040]

The tray is 17" long, depth?

I guess you can remove the handle, but it folds up if need be. It's actually nice to just grab it and place it where you working or on top of your tool box, etc.

They don't sell extra pegs, but this style of rail is very common and you can buy them elsewhere if you need to. Craftsman rails are similar at Sears USA.

I can buy extra rails for just the pegs from princessauto in Canada

Hop into lowes and take a look at it.

 

[cadavjo]

The tray is 17" long, depth?

I guess you can remove the handle, but it folds up if need be. It's actually nice to just grab it and place it where you working or on top of your tool box, etc.

They don't sell extra pegs, but this style of rail is very common and you can buy them elsewhere if you need to. Craftsman rails are similar at Sears USA.

I can buy extra rails for just the pegs from princessauto in Canada

Hop into lowes and take a look at it.

Thanks for the info, do you have the width or depth, by chance?

 

[rmsg0040]

Not off hand, wont be until Monday until I am in my box

 

[kunkernator]

5 Gas Emissions Exhaust Analyzer

 

[theamcaddict]

Craftsman 34956 & 44802 made in the USA

sent from my Moto X

 

[cadavjo]

Not off hand, wont be until Monday until I am in my box

That's fine, none of my area stores have them, or I would just go look

 

[jfcasey]

5 Gas Emissions Exhaust Analyzer

You bought your own 5 gas analyzer while your still in school?

 

[kunkernator]

You bought your own 5 gas analyzer while your still in school?

Hell no. I would never pay new price for one of these. I found it used on CL for a good price because the internal pump was broken, I think I only got $200 in to it including the repair of the pump.

 

[jsharpphoto]

I picked up this grinder at a garage sale today for $10, and it came with a 40 lb weight pretending to be a bench vise.

It says "mark 1" "industrial rated" which I highly doubt, 1/2 hp and it's made in Taiwan.

Does anyone know anything about it? The internets didn't yield much info.

 

[RCStocker]

This is the SK set I picked up today for $100. It has been posted for 2 months for $200. I made an offer of $150 with no response.
Last months I picked up a full set of SAE 1/4" to 1-1/4" for $50 in the roll. It was a satin finish and had never been used.
That makes 2 very good tool wrench sets for $150. I don't know why people are asking more for Craftsman USA. I find deals like this all the time on tools. I am giving them to one of my son's No special reason. He has good wrenches. He just needs a little better. LOL

http://inlandempire.craigslist.org/tls/4391668839.html

 

[CalsXS2]

Here's a couple of old pair of vise grips I picked up.

 

[gtlaw]

Here's a couple of old pair of vise grips I picked up.

I saw you driving back from the store

 

[ADSR]

I saw you driving back from the store

lol! No kidding!

 

[fhemm20]

New to me Milwaukee 6176-20

In good shape, no slop in pivot.

$125

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[ex-x-fire]

I picked up a husky 1/2 torque wrench today, the price was 85 bucks. I successfully used a HF 20% coupon at Home Depot, knocking the price down to 68 bucks plus $3.50 for tax. The nearest HF is over an hour away yet they still let me use it at HD.

 

[f150skidoo]

I picked up this used 17" 1HP JET drill press for $150, I gotta clean off the surface rust and it will look like new.

 

[ADSR]

I picked up a husky 1/2 torque wrench today, the price was 85 bucks. I successfully used a HF 20% coupon at Home Depot, knocking the price down to 68 bucks plus $3.50 for tax. The nearest HF is over an hour away yet they still let me use it at HD.

Are these the new made in USA ones i've been hearing about?

 

[ex-x-fire]

Are these the new made in USA ones i've been hearing about?

Yeah, matco sells the same thing for $319.

 

[413dan]

picked this up off a fam friend today, please see thread I need some info, thanks!
http://www.garagejournal.com/forum/showthread.php?t=248802

 

[FOCUS.FREAK]

Anyone else not able to see pictures on tapatalk? Coming up as broken. I have not checked my comp yet

Sent from my SPH-L720 using Tapatalk

 

[ADSR]

Yeah, matco sells the same thing for $319.

Holy ****! You did damn good!

 

[ihateminimumwage]

Holy ****! You did damn good!

New USA Husky's are the same as Matco/Armstrong/Gearwrench. Good quality, especially for the cost at Home Depot.

http://www.garagejournal.com/forum/showpost.php?p=3259086&postcount=43

 

[1foxracing]

Wright Tool 3490

 

[jim1987]

Today's new arrivals and still 1 more delivery to come.

The 1/2" deep impact sockets are Snap On and I have them for sale locally right now. When they sell they will replaced with the equivalent Wright Tool models.

Where'd you get cougar pro ratchet wrenches? Never heard of them. Details?

Btw howdy neighbor! I live in the county due south to you!

 

[1foxracing]

Details on the Cougar Pro wrenches are there part of Wright Tool but anything labeled Cougar Pro is made in Taiwan. They still carry the lifetime warranty and the cheapest place I found them was a E-bay store, shipped from the Toledo area and I had them the next day.
http://www.ebay.com/itm/321344430683?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649