nmcqueen469
Well-known member
$7?!
Damn.
Sent from my iPhone using Tapatalk
Damn.
Sent from my iPhone using Tapatalk
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
fhemm20
Well-known member
So I was working about 2 hours from the shop today. When I got to what I was there to work on I realized I had forgotten my ball pien and punches for 1 roll pin I had to pull. I turn around and the Cornwell guy had just pulled up about 50 yards from me. 16 Oz ball pien and roll pin punch set for $80
Attachments
Last edited:
oh man! you did good!
Roy, where/how did you score those Craftsman wrenches?
GTA Matt
Well-known member
Was needing my own 3/4 impact...
Thanks, you just cost me $500.... plus $18 for the cover.... Slick looking gun
Thanks, you just cost me $500.... plus $18 for the cover.... Slick looking gun
You're welcome
Don't forget a Parker Push-Lok whip hose for another $36 or so NorCalWrenchin
Well-known member
Man, these pictures are terrible..
Anyway, picked up these 3/8 extensions, and scored the ratchet for free! My driver also hooked me up with a SS water bottle in flat black and a made in china hat!
Anyway, picked up these 3/8 extensions, and scored the ratchet for free! My driver also hooked me up with a SS water bottle in flat black and a made in china hat!
RedFordTruck
Well-known member
- Joined
- May 10, 2012
- Messages
- 921
Yeah! Last one they had and it wasnt there a week ago. Just happened to check the tool aisle at the right time I guess. Seems like a great little vise. Especially for $7!
Lowes just started carrying the same model and its $49.98
jeffmoss26
Well-known member
Another order from Zoro:
Klein Tools F connector tool, some 1/4-20 hex nuts, Leviton electrical plugs.
Klein Tools F connector tool, some 1/4-20 hex nuts, Leviton electrical plugs.
aaronrkelly
Well-known member
3 PC Craftsman extension set
Sunex bit driver set
20mm SK stubby (free)
5 Wright metric wrenches
Sunex bit driver set
20mm SK stubby (free)
5 Wright metric wrenches
GTA Matt
Well-known member
You're welcome
What size fitting does the gun take, just a typical air line size or is it larger? I really need to stay off this thread...
rshadd
Well-known member
I picked up a small tub of Rubyfluid Soldering Paste today.
The only way to get USA is to order single open stock wrenches. They were on sale when I ordered them from Sears. Pricey, but worth it.
Got it, thanks...
Stroked383
Well-known member
Had to do a little rearranging to make room for the new GearWrench crows foot wrenches. Also bought 2 sets of GearWrench flex head wrenches (16pc. metric and 12pc standard) to take home.
CarsonConcepts
Well-known member
100% the fault of GJ. And one of several reasons to get me to start posting. Picked these up from Lowe's last week. All Bessey stuff
20 - 4" C-Clamps
19 - 2.5" C-Clamps
10 - 3" Metal Spring Clamps
5 - 2" Metal Spring Clamps
1 - 14pc Nylon Spring Clamp Set
3 - 4" HD Workshop Vise
4 - 5" Multi-Vise
Walked out for $52.53 total. Counter guy wasn't happy.
Sorry for crappy cell picture
~ Carson
20 - 4" C-Clamps
19 - 2.5" C-Clamps
10 - 3" Metal Spring Clamps
5 - 2" Metal Spring Clamps
1 - 14pc Nylon Spring Clamp Set
3 - 4" HD Workshop Vise
4 - 5" Multi-Vise
Walked out for $52.53 total. Counter guy wasn't happy.
Sorry for crappy cell picture
~ Carson
Attachments
stonesfan68
Well-known member
I picked up a magnetic tray and 1/4" speed handle from Sears. The speeder was on sale for $2.60 !
Sent from my iPhone using Tapatalk
aaronrkelly
Well-known member
Got this set of Williams Supercombo metric wrenches in today.....SAE should be here soon.
Dust Devil
Well-known member
Had to do a little rearranging to make room for the new GearWrench crows foot wrenches. Also bought 2 sets of GearWrench flex head wrenches (16pc. metric and 12pc standard) to take home.
Nice drawer
Had to do a little rearranging to make room for the new GearWrench crows foot wrenches. Also bought 2 sets of GearWrench flex head wrenches (16pc. metric and 12pc standard) to take home.
If you buy an 11/32", you will have the 13 piece master set.
Not sure if you have a Menards near, but mine had it stocked for right around $12.
What size fitting does the gun take, just a typical air line size or is it larger? I really need to stay off this thread...
3/8 NPT so yes larger than your typical...
bodyguy16
Well-known member
Where do you buy your proto tools from?
I use Tools-Plus
Best price but the shipping is usually slow. We have a local dealer if I'm in a hurry or need warranty work.
Last edited:
Only other tool place I can suggest is eppy's tool in Brooklyn and Howell.
Www.eppys.com
Website does not do them justice.
This place is really great, at least the one I go to in Brooklyn. They guys are great and know there tools. Havent been to the NJ one yet. Its worth being a lifetime member.
There site ***** compared to the catalogs, so much stuff is missing on their site. Its a nice feel every time I walk in there.
low_dakota94
Well-known member
- Joined
- Jun 26, 2014
- Messages
- 79
Decided to revamp my screwdriver drawer that used to be a mix of a little of everything. Most of the old screwdrivers found there way into the truck tool box. Went with a whole Eastwood set, they seem to be good quality for
the price. Also picked up some Pittsburgh pros in case I need to beat on one lol.
Triple macs
Well-known member
Couple weeks ago I talked to my driver about the hard handle flex ratchets that came out on the trucks at Xmas time. He said he still had a couple at home he thought and would bring on for me. So today I scored just what I wanted. A thlfd72-g. I been wanting a long handle 1/4" flex for awhile now
Also grabbed a blue point small clip tool
Sent from my iPhone using Tapatalk
Also grabbed a blue point small clip tool
Sent from my iPhone using Tapatalk
Hpozzuoli
Well-known member
Couple weeks ago I talked to my driver about the hard handle flex ratchets that came out on the trucks at Xmas time. He said he still had a couple at home he thought and would bring on for me. So today I scored just what I wanted. A thlfd72-g. I been wanting a long handle 1/4" flex for awhile now
Also grabbed a blue point small clip tool
Sent from my iPhone using Tapatalk
it was only a matter of time!
Jeepster425
Well-known member
My new to me ratchet, got it for about half the price it normally costs. It wasa repo form my snappy on guy. SHLF80A is the part number
Jarhead0408
Well-known member
Very nice man^^^^^^
MrJason
Well-known member
Newest arrival, just off of FedEx truck!
1/4" long handle Titan Swivel 72T
1/4" Gearwrench 120T 81012P
1/4" Williams 60T, 30011
I am a happy man. Total out of pocket via Amazon: $67.98
1/4" long handle Titan Swivel 72T
1/4" Gearwrench 120T 81012P
1/4" Williams 60T, 30011
I am a happy man. Total out of pocket via Amazon: $67.98
Last edited:
cosmik binturong
Well-known member
got that in the mail this morning:
straight from Vegas baby!
already have the 5mm version somewhere, best Wiha handle version.
seller has some more: *click!*
straight from Vegas baby!
already have the 5mm version somewhere, best Wiha handle version.
seller has some more: *click!*
Last edited:
MrJason
Well-known member
Which ratchet, so I can answer directly?
Jason
mkv221
Active member
Picked this up this week. 3/8dr 14.4v micro-lithium. It busts the lug nuts off my car with no problem.
