Williams and Hazet wrenches

[Letsgobowhunting]

My local Mark's store must have bought a NOS box wrenches close out. I
They are selling them for $.99 each. I just got these for less than $7. The 4 williams are offset and the other three are deep offset.
I probably will never use them but, oh man, did I enjoy finding them.

 

[espyking83]

Deep offsets are lifesavers sometimes. Good buy.

 

[espyking83]

You should buy them up and sell them on here. $3 a piece is fair for everyone!

 

[dede2897234]

Letsgobowhunting,

Are you referring to Marc's, the chain of closeout stores in Northeast OH: LINK?

Which Marc's location did you buy those sweet wrenches?


Thanks,

Dave

 

[sonvolt]

Jeez that's a sweet deal

 

[monomach]

You should buy them up and sell them on here. $3 a piece is fair for everyone!

This is what I'm thinking. Even if he bought 300 wrenches, he'd be sold out in a day or two.

I'd buy a set.

 

[Umclemrbig]

I'm in for a set!


Sent from my iPad using Tapatalk

 

[Letsgobowhunting]

Letsgobowhunting,

Are you referring to Marc's, the chain of closeout stores in Northeast OH: LINK?

Which Marc's location did you buy those sweet wrenches?


Thanks,

Dave

Yes, the place you go for groceries and things. It is the Marks in Massillon on or by Amerherst. I am going to go to the Canton one and check them out.

 

[ravenzfusion]

i'm in cleveland. the marc's by me are priced at 1.99 per wrench. so i will wait until they lower them. they had a ton. in addition to hazet and williams, they had bahco, walter and britool (england). and some rusted *** ones i couldn't make out. any of those good? never heard of walter or britool. i plan on getting myself a set of the williams and hazets. the offset williams are nice.

 

[alinc100]

I'd be up for a set of williams if someone in NEO wants to box em up and ship to SE Michigan

 

[gsingh]

I am in for some hazet wrenchs. If someone wants to buy them and ship em to me, please let me know.

 

[Brownsfan]

Im checking my local store tomorrow. Don't need them but will check it out

 

[dede2897234]

i'm in cleveland. the marc's by me are priced at 1.99 per wrench. so i will wait until they lower them. they had a ton. in addition to hazet and williams, they had bahco, walter and britool (england). and some rusted *** ones i couldn't make out. any of those good? never heard of walter or britool. i plan on getting myself a set of the williams and hazets. the offset williams are nice.

ravenzfusion,

Which Cleveland Marc's store has the new, old stock wrenches you referenced above?

Were there only standard size (no metric) wrenches available?


Bahco was a well respected Swedish hand tool manufacturer before Snap-on purchased them. Now, very few, if none of their tools are produced in Sweden.

Walter is a German hand tool manufacturer.

Britool was a well respected British hand tool manufacturer. However, Stanley purchased the company and moved production to Asia.


You can find out more about Bahco, Walter, Britool, and other European tool manufacturers in the "Tools From the Old World" thread (LINK) created by super member "Monte".


Thanks,

Dave

 

[wornoutoldman]

I'm in the buy all em camp. If anyone does I'm in for a set or three.

 

[Qualitytools]

I would be interested in Metric Hazet set Please PM Me.

 

[ravenzfusion]

Thanks for the info. I think they were all standard. I do remember the Walters had "made in germany" marked on them.. I will have to get another look though. There were so many at the Middleburg Hts location. I have also checked the parma midtown location and the Brookpark Smith road location. Those 2 also had them, but not nearly as many as Middleburg. Some of the wrenches at Brookpark were single wrenches in plastic sealed bags. I don't know where Marcs buys some of their stuff sometimes, either they get a lot of junk or some good stuff like this wrench deal. I may have to make the trip to the Amherst location in which the Original Poster found them for .99 each. I'm also expecting them to lower price to .99 at their other loactions. I will make as many sets as I can and box them up for all who is interested.

ravenzfusion,

Which Cleveland Marc's store has the new, old stock wrenches you referenced above?

Were there only standard size (no metric) wrenches available?


Bahco was a well respected Swedish hand tool manufacturer before Snap-on purchased them. Now, very few, if none of their tools are produced in Sweden.

Walter is a German hand tool manufacturer.

Britool was a well respected British hand tool manufacturer. However, Stanley purchased the company and moved production to Asia.


You can find out more about Bahco, Walter, Britool, and other European tool manufacturers in the "Tools From the Old World" thread (LINK) created by super member "Monte".


Thanks,

Dave

 

[Qualitytools]

Thanks for the info. I think they were all standard. I do remember the Walters had "made in germany" marked on them.. I will have to get another look though. There were so many at the Middleburg Hts location. I have also checked the parma midtown location and the Brookpark Smith road location. Those 2 also had them, but not nearly as many as Middleburg. Some of the wrenches at Brookpark were single wrenches in plastic sealed bags. I don't know where Marcs buys some of their stuff sometimes, either they get a lot of junk or some good stuff like this wrench deal. I may have to make the trip to the Amherst location in which the Original Poster found them for .99 each. I'm also expecting them to lower price to .99 at their other loactions. I will make as many sets as I can and box them up for all who is interested.

Thanks I would be interested in a set of Metric wrenches made in Germany, any photos of what they look like or the store display, bin??

 

[ravenzfusion]

I'm going to wait until the price gets lowered on them before buying any. But when they do, I will get quite a few sets.

 

[St-rider]

Marcs in Avon, Ohio has them for $1.99 also. Some larger open end wrenches too. They also had a box of sockets. Looked like black oxide finish, impact type but I think they were all the same size. I think it said "Israel" on the sockets or some of the wrenches.

 

[ravenzfusion]

For anyone interested, I have the following. I'll sell for 3 $ each, prefer to sell the bulk to one or two people

hazet deep offset 13/16 / 7/8 (1)
1 1/16 / 1 1/8 (2)

walter double open end 1 1/4 x 1 1/8 (2)

britool double open end 25/32 x 13/16 (2)

stahlwille double open end 1 1/18 x 1 1/4 (1)

bahco double open end 22mm x 27 mm (3)

williams superrench deep offset 1 x 15/16 (3)


7/8 x 3/4 (3)

williams superrench double open end 7/8 x 15/16

 

[z1kzonly]

My local Mark's store must have bought a NOS box wrenches close out. I
They are selling them for $.99 each. I just got these for less than $7. The 4 williams are offset and the other three are deep offset.
I probably will never use them but, oh man, did I enjoy finding them.

What a score for those J H Williams wrenches! Better than any wrench made in the last 30 years! They will last till the end of time! IMO! Best tools ever made!