Do they even make this?

[FiendFX]

Hello.

I'm looking for a 3/8" drive ratchet: smallest head, flex head, longest handle.

Do they even make such thing?

I got the snap on 3/8" ratchet in a 1/4" body. I want something similar to that but flex head and long body.

 

[Askme42]

Sk3767 I think

 

[FiendFX]

Sk3767 I think

I'm looking for something longer than that. Close to 10" as possible, with 72 teeth.

 

[BirdMobile]

For about the smallest in the world, buy a Harbor Freight T-Handled flex roto-ratchet "thing". Undo the bolt at the flex joint, and you end up with a super tiny roto-ratchet ratchet with a 3/8 drive.

 

[dutchgray]

Do Snap On make a flex head 1/4 ratchet with the same mechanism as your 3/8 small body, as you could always change the drive size if they do.
Otherwise Askme42 is dead right, but its still not very long at 6.3".

 

[BirdMobile]

Oops... missed your requirement for a long handle. The HF "thing" would provide that as-is, if you can live with the "T" at the end of it. Or, grind it off.

 

[canuckian]

drop the kit from the FC72 you have into the body of a THLF72 ratchet. that'll give you 8 1/4". If you can sacrifice the flex head, put it into a TLL72 ratchet body.

outside of that, Matco I believe has a smaller head 3/8 locking flx ratchet that's fairly long

 

[General Geoff]

Hello.

I'm looking for a 3/8" drive ratchet: smallest head, flex head, longest handle.

Do they even make such thing?

I got the snap on 3/8" ratchet in a 1/4" body. I want something similar to that but flex head and long body.

Not Snap-On, but it fits your requirements completely.

3/8" head thickness:

 

[BirdMobile]

Forgot about that one...
Those are seriously great tools... despite being HF.

 

[Dirty Diesels]

Hello.

I'm looking for a 3/8" drive ratchet: smallest head, flex head, longest handle.

Do they even make such thing?

I got the snap on 3/8" ratchet in a 1/4" body. I want something similar to that but flex head and long body.

Snap on's longest 1/4" body in a 3/8" ratchet is the FCF72 flex head at 6 & 1/4"s, if your looking for longer, put that kit in an THLF72 or/but fixed head TLL72 ratchets !

 

[619DioFan]

Not Snap-On, but it fits your requirements completely.

3/8" head thickness:

I have that one and the short non flex version. really love them.