Sheet metal rippers with sds shank????

[404]

Hello All,
Looking for rippers to fit my sds electric hammer. Have to cut metal (demolition) in off site location with elect. (120v 15A only) but no air.

So far have only found ajax.

What are other sources, or is there a way to use my .401 shank air ripper chisels with my sds hammer (Adapters)??

All comments appreciated.

Pics show what I am looking for.

 

[404]

Bumb! The smart people here must have some ideas!

 

[Cypherian]

http://www.handsontools.com/SG-Tool-Aid-91600-Body-Man-1-Cutter_p_8880.html
http://www.nationaltoolwarehouse.co...r-P8366.aspx?gclid=CP3mlNTLscICFU4V7AodQisAAw
https://www.scsinconline.com/shop/air-chisels-punches-rivet-pings-sets
http://www.tooltopia.com/mayhew-too...scplp7958899&gclid=CNKJ24fMscICFfLm7Aod2GAAQA

Search .401 Shank Body Panel cutters

Or there is always http://www.sears.com/craftsman-25574-7.8-amp-corded-6-1-8inch/p-00925574000P

And http://www.stihlusa.com/products/cut-off-machines/

 

[Thumper68]

All kinds of different porpoise built tools here. What gage metal?

http://www.northerntool.com/shop/tools/category_power-tools+grinders-cutting-tools-accessories+cutting-shears

 

[404]

http://www.handsontools.com/SG-Tool-Aid-91600-Body-Man-1-Cutter_p_8880.html
http://www.nationaltoolwarehouse.co...r-P8366.aspx?gclid=CP3mlNTLscICFU4V7AodQisAAw
https://www.scsinconline.com/shop/air-chisels-punches-rivet-pings-sets
http://www.tooltopia.com/mayhew-too...scplp7958899&gclid=CNKJ24fMscICFfLm7Aod2GAAQA

Search .401 Shank Body Panel cutters

Or there is always http://www.sears.com/craftsman-25574-7.8-amp-corded-6-1-8inch/p-00925574000P

And http://www.stihlusa.com/products/cut-off-machines/

Thank you for the links. I am looking for panel cutters with a sds shank, not the more usual .401 shank. Sorry that was not clear in my original post.

 

[404]

All kinds of different porpoise built tools here. What gage metal?

http://www.northerntool.com/shop/tools/category_power-tools+grinders-cutting-tools-accessories+cutting-shears

Thanks for the links. Gets me out of the thought rut I was in.
Metal is about .032 inch. But painted and with some formed bends.