Show your new tool arrivals

[thecody59]

Nothing to great but some killer deals the Defiant 1000 lumen flashlight half off for $15, the dremel kits $20 marked down from $80, craftsmen bolt outs almost free had points plus they were half off at $10, and the griptite's were half off at sears for $8.50 so picked up a sae set and metric no snap on or anything but i am happy with my haul.

P.S. sorry about the bad camera pics i am working on getting that fixed.

 

[bobbycos]

Nothing to great but some killer deals the Defiant 1000 lumen flashlight half off for $15, the dremel kits $20 marked down from $80, craftsmen bolt outs almost free had points plus they were half off at $10, and the griptite's were half off at sears for $8.50 so picked up a sae set and metric no snap on or anything but i am happy with my haul.

P.S. sorry about the bad camera pics i am working on getting that fixed.

Sears told me the sale on the bolt outs was over and they were back at $19.99 each

 

[thecody59]

Sorry forgot to say I had them for pickup bought them last week.

 

[bobbycos]

Sorry forgot to say I had them for pickup bought them last week.

now you say

 

[jeepinerdeep]

Ordered a Frig part from amazon so I figured I needed these too.

OOOHHHH Sweet. That looks delicious.

 

[tjmonsen5]

I just want to know the difference between those and the 87CF ones which I have besides the obvious stamped "S"






Sent from my iPhone 5s using Tapatalk

Pivot joint moved closer to the cutting jaws. 25% less effort required compared to the old design. New vector edge design, shears instead of a block and blade design. Stamped USA. There is a YouTube video that explains it well.

 

[Ruger_556]

New snap on side cutters and cordless grinder.

Nice, looks like they are using Metabo's new low profile head on the grinder

 

[MrAperture]

Just received my GW order from NTX tools, I know NTX have a bad name around here, but this is my second order with them both were around 500$ and got them inside 2 business days. Finally finished gearing up my ratchet drawer and pliers drawer is begining to be pretty good too. I'm new here, this is my first post, I will start a thread with my entire toolbox and garage setup when I'll have more time, meanwhile, enjoy

https://scontent-iad.**.fbcdn.net/hphotos-xfp1/v/t1.0-9/10987731_10153489302377923_3141916956914178070_n.jpg?oh=09c77d6cfd45ace045330442fe017845&oe=554C44E6

 

[rockinacummins]

Dang you went all out for gearwrench! I like it!

 

[MrAperture]

rockinacummins I'm on a budget for my tool box and I'm going for the best bang for my buck. I heard good things about GW ratchets. They are heavier than craftman/mastercraft/stanley ratchets and I can feel the built quality. Cant wait to wrench with them.

 

[bmxdad]

Found a CL deal, I think.

$30 for some Evercraft Wrenches

1-3/8", 1-5/8", 1-3/4", 1-7/8", and 2"

Worth it?

 

[jgreen-fsi]

Ordered a Frig part from amazon so I figured I needed these too.

Nice. Those are on my list.

 

[rockinacummins]

You will love those ratchets for sure!

 

[SuperSheep]

Metabo SSW 18 LTX 400 BL Impact Wrech, finally broke down and ordered one. Ordered it from mudsupply out of Phoniex, Arizona. Quick communication, quick shipping too.

300ftlb torque, 12 power setting, brushless, 5.2amp battery, 1/2inch anvil with a hogring as well as ability to insert retaining pin. Made in Germany and all in a compact package that weighs less than 4lbs and as light if not lighter than the Milwaukee M18 Fuel.

I have used a ton of different models of Impacts as well as own a lot of them. This is currently hands down the best Impact wrench available. It is the most powerful compact 18v/20v impact wrench with the most number of torque setting. The 5.2amp, 93.6Wh battery is the largest capacity battery on the market in NA atm. Build quality is top notch, exactly what you expect from made in Germany. Ergonomics is excellent and I think it is one good looking tool. Only downside is the cost of the bare tool is as much as some other brand's entire kit...

Anyways I'll shut up now, this probably reads like a infomercial and i probably sound like a Metabo sellsmen.

Oh yeah thanks to Monte and rice rocket for showing me about this and spending all my money for me

 

[Tellingthem]

Got some more of these eazypower torx screwdrivers. Really don't see many full sized screwdrivers with that size torx. All told I got t6-9,15. I put a craftsman t15 next to it to show the size difference. All USA.

 

[woodstockva]

Metabo SSW 18 LTX 400 BL Impact Wrech, finally broke down and ordered one. Ordered it from mudsupply out of Phoniex, Arizona. Quick communication, quick shipping too.

300ftlb torque, 12 power setting, brushless, 5.2amp battery, 1/2inch anvil with a hogring as well as ability to insert retaining pin. Made in Germany and all in a compact package that weighs less than 4lbs and as light if not lighter than the Milwaukee M18 Fuel.

I have used a ton of different models of Impacts as well as own a lot of them. This is currently hands down the best Impact wrench available. It is the most powerful compact 18v/20v impact wrench with the most number of torque setting. The 5.2amp, 93.6Wh battery is the largest capacity battery on the market in NA atm. Build quality is top notch, exactly what you expect from made in Germany. Ergonomics is excellent and I think it is one good looking tool. Only downside is the cost of the bare tool is as much as some other brand's entire kit...

Anyways I'll shut up now, this probably reads like a infomercial and i probably sound like a Metabo sellsmen.

Oh yeah thanks to Monte and rice rocket for showing me about this and spending all my money for me

Nice! I saw these in person at the World of Concrete in Vegas earlier this month.....and you are correct, the most powerful 1/2" compact cordless there is!

 

[littleponderosa]

Found a CL deal, I think.

$30 for some Evercraft Wrenches

1-3/8", 1-5/8", 1-3/4", 1-7/8", and 2"

Worth it?

If it is worth anything, I paid $39.95 for the 2" last summer during a time in need. Local NAPA and no, I couldn't talk them down. Still missing the hole as of last week, so its not like it was a high traffic item.
Bill

 

[Botje]

leinen Junior 150. Not sure whats junior about it, its heavy!

 

[ChrisLS8]

Nice! I saw these in person at the World of Concrete in Vegas earlier this month.....and you are correct, the most powerful 1/2" compact cordless there is!

Ive never been there but one of my contracts at work Bolt Star has gotten alot of orders from that Expo.

 

[zbyler]

After seeing countless threads and info about these I finally picked them up.

Knipex 10" pliers wrench:





Got them at Sears with some surprise points, ended up being less than $40. I'll be putting these to use very soon!

 

[MrAperture]

Suspension maintenance sets, O2 sensor socket set, snap ring pliers set and small bushing / bearing driver set from Powerbuilt.

 

[MrAperture]

I got these a little while ago when I wasn't a member but I figure I drop those here so you can enjoy them as much as I do.

Innova advance timing light
Bore gauge set
Lisle quick connect/disconnect set
Piston ring service set
Valve compressor, overhead and for small engine
Blind hole sliding hammer

 

[motoretro]

leinen Junior 150. Not sure whats junior about it, its heavy!

While I'm not familiar with the make, that's a excellent looking vise! What's the country of origin? Are there other mounting holes other than what shows in the picture?
Motoretro

 

[Caparris]

I got these a little while ago when I wasn't a member but I figure I drop those here so you can enjoy them as much as I do.

Innova advance timing light
Bore gauge set
Lisle quick connect/disconnect set
Piston ring service set
Valve compressor, overhead and for small engine
Blind hole sliding hammer

Nice. I've got that bore gauge set (or one extremely similar anyways) and it's done pretty good for me.

 

[Caparris]

 

[Monte]

New snap on cordless grinder.

awesome !!! made in Germany i guess ?!?!

Looks a lot like the Metabo low profile grinder. Too bad snappy cant make a nice corded grinder!

Maybe try a Metabo

 

[fanatic]

Sunex 2640, 2645, & 5153DD 1/2" drive impact sets purchased from CPO Outlets during their last sale.


Craftsman 1/2" drive extensions, pinned and pinless universals, and 3/8" adapter purchased from eBay.

 

[hoston23]

New snap on side cutters and cordless grinder.

[/URL][/IMG]

[/URL][/IMG]

that grinder looks very similar to the milwaukee fuel grinder. even the little filter on the handle looks identical

 

[Caparris]

that grinder looks very similar to the milwaukee fuel grinder. even the little filter on the handle looks identical

Just double the price or more and there Ya go, lol

 

[hoston23]

Just double the price or more and there Ya go, lol

and half the warrenty

 

[afazz]

I haven't used them yet, but I've heard good things.

 

[ADSR]

I haven't used them yet, but I've heard good things.

I want!!

 

[Jon.R]

Just double the price or more and there Ya go, lol

It's made by metabo . I looked online amazon and another site and the metabo sells for 579 and I paid 628 off my snap on truck.

 

[rockinacummins]

Me too!

 

[Jon.R]

that grinder looks very similar to the milwaukee fuel grinder. even the little filter on the handle looks identical

Does the battarie on the Milwaukee rotate 360 ? And it's made by metabo not Milwaukee .

 

[Jon.R]

The snap on grinder is a low profile for getting into tight spots and the battarie rotates 360 . The Milwaukee head is a lot more bulky and I'm pretty sure you can't rotate the battarie 360 .

 

[Kamanhart]

I want!!

X2 those look like some bad mama jamas

 

[BUILTTOLAST]

I haven't used them yet, but I've heard good things.

Nice
+1

 

[d.mcfarland]

NOS Blue Point locking pliers $22 off eBay and Tekton 1/2 metric shallow impacts for $19 from Amazon.

 

[mkv221]

X2