Show your new tool arrivals

[dsimatt]

Send it back

Buy M18 2763

..

Profit

(in all honesty I sold my Snap On one and have been much happier with the Milwaukee, nice price regardless though!)

The milwaukee looks nice and the price isn't to bad but still plenty, i just got the same snap on 1/2 for $300 brand new and couldn't pass the deal up.

 

[Tyguy1209]

My second cornwell toolbox

 

[Tyguy1209]

What it's replacing

 

[Brownsfan]

I love Cornwell boxes. Almost bought the same combo a few years back. Wish I had pulled the trigger. Love the drawer pulls. The best I have ever used

 

[jetdawg]

Amazon either sources from illegitimate channels or buys in such large quantities that they can price many items at or below the cost of a small independent dealer. I've seen it quite a bit too. If its not at cost its not much higher. Then people scoff at the little guy trying to make a reasonable profit and ask for price matching.

Likewise they can afford to make little or no profit and not be effected because they move such a volume of other products that it doesn't matter. All big box/mass retailers operate this way, its why most of the little guys have been put out of business.

^this

it's a tough business so we are constantly trying to find ways around to survive

 

[jobo1004]

Nothing too exciting. This showed up today from Zoro.

 

[devoncoolman]

Nothing too exciting. This showed up today from Zoro.

Those are sweet i want one of them.

 

[MrAperture]

New member to the family [emoji4] scored a brand new NAPA Service cart

Sent from my iPhone using Tapatalk

 

[Ruger_556]

 

[the gypsy]

Oh wow I was browsing and recognized the Quebec license plate. I like the box.

 

[Sterff]

I probably have about 10 adjustables but, I think I want one of those now. They look nice.

 

[jobo1004]

Those are sweet i want one of them.

I picked it up during the 30% off sale. It's made in China and the quality of the printing is a bit disappointing. So long as it helps me identify nuts and bolts it'll be worth it.

http://www.zoro.com/i/G2491291/

 

[devoncoolman]

I picked it up during the 30% off sale. It's made in China and the quality of the printing is a bit disappointing. So long as it helps me identify nuts and bolts it'll be worth it.

http://www.zoro.com/i/G2491291/

The local hardware store carries them ill probably just buy it from them.

 

[Triple macs]

Got these three from my wife for our anniversary. One more pair coming (backordered).

Sent from my iPhone using Tapatalk

 

[the74impala]

Lots of cool stuff here. I have been lurking and buying. I guess I will have to post sometime.

 

[UncleJoe]

Nothing too exciting. This showed up today from Zoro.

Where did you get that and how much did it cost. I want one

 

[superchargedv8]

that looks nice...how do they hold up? Asking cause I've been wanting to buy a few sizes to add to my box.

 

[bigjoez77]

Ok I gotcha. Yeah I seldom order from amazon because I like to support small business's and local people. I would much rather pay a little more and support someone local.
In this case I already checked tho and the price markup on this item particularly was insane through snap-on through their supplemental catalog. Other than that there was nobody local to get it through


Sent from my iPhone using Tapatalk

sorry this isnt related to the thread but i keep looking at your avatar picture, what car is that?

 

[bobbycos]

<a href="http://s1046.photobucket.com/user/vmalchesky/media/D5B24548-43CE-4E62-B8D1-19CE2AC5DD11_zpsqsrxfshr.jpg.html" target="_blank"><img src="http://i1046.photobucket.com/albums/b468/vmalchesky/D5B24548-43CE-4E62-B8D1-19CE2AC5DD11_zpsqsrxfshr.jpg" border="0" alt=" photo D5B24548-43CE-4E62-B8D1-19CE2AC5DD11_zpsqsrxfshr.jpg"/></a>

Just realized i photoed the spanish side of the box!

Si Señor !!!!!!!

 

[XxToolAholicxX]

Got these three from my wife for our anniversary. One more pair coming (backordered).

Sent from my iPhone using Tapatalk

I don't know why Snap-On do this cheap etching instead of stamping. In time oil and grease will wipe the markings. They are supposed to be a superior tool company and separate themselves from inferior ones. I guess profits comes before quality for them too these days. I will not buy them..
-----------------------------------------------------------------------------------------------
I am a ToolAholic,Sometimes I regret it,Especially when the ToolMan wont give me no credit

 

[BTMSUP]

I don't know why Snap-On do this cheap etching instead of stamping. In time oil and grease will wipe the markings. They are supposed to be a superior tool company and separate themselves from inferior ones. I guess profits comes before quality for them too these days. I will not buy them..
-----------------------------------------------------------------------------------------------
I am a ToolAholic,Sometimes I regret it,Especially when the ToolMan wont give me no credit

I have yet to see this happen. I have a few snap on sets of various ages.

 

[JAKE-THE-TOOL-MAN]

I have yet to see this happen. I have a few snap on sets of various ages.

Same here, I have a few sets that I used professionally for four years that still have the laser etching on them. The guys that work at the transmission shop next door also haven't had any issues with theirs and ATF isn't easy on tool finishes.

 

[littleponderosa]

John Deere 1/2" metrics. Nothing fancy - COO Taiwan. Price was right and a lifetime guarantee offer from the dealer.

 

[colin39]

sorry this isnt related to the thread but i keep looking at your avatar picture, what car is that?

Lancia delta hf Intagrale? I think, its difficult looking on phone. But hey ho chuck him a pm sure he will tell ya or correct me. Lol

 

[bobbycos]

John Deere 1/2" metrics. Nothing fancy - COO Taiwan. Price was right and a lifetime guarantee offer from the dealer.

Is the John Deere name stamped on the sockets?

My inquiring mind wants to know

 

[90zcar]

sorry this isnt related to the thread but i keep looking at your avatar picture, what car is that?

1990 cavalier Z24


Sent from my iPhone using Tapatalk

 

[ianguilly]

Fresh off the delivery truck yesterday, didn't even get to play with it at all had to leave.

 

[Chadwilliam1]

Nothing too exciting. This showed up today from Zoro.

Nice do you have a link?

 

[jobo1004]

Nice do you have a link?

http://www.zoro.com/i/G2491291/

 

[ClineWrench]

Nice thread gague. I need one. Maybe ill do the same thing and Zoro it.

 

[Sorin S.]

I'm so happy that I have found . That my money not spent most of the garbage compartment of the supermarket, I took the stuff profesional, this is my last things I bought :
Ceccato beltair Pro 200C 3MR
Gruppo pompante
Beta 1949DGT
GAV F.R.L200

 

[devoncoolman]

Looks very nice sorin. That beta tire inflater looks very nice.

 

[Sorin S.]

Digital tire inflator and much more accurate than the gauge, this was the real reason to Buy (0.05 bar against 0.1 bar) .I managed to inflate the tires of my truck to 130 PSI (9 bar)http://www.beta-tools.com/catalog/articles/view/1949DGT/__lang_en/__catlang_en/__catalog_beta/__filters_

 

[shanny19]

That is one **** compressor.

 

[just a noob]

Is the John Deere name stamped on the sockets?

My inquiring mind wants to know

It is

 

[colin39]

1990 cavalier Z24


Sent from my iPhone using Tapatalk

Haha i wasnt even close

 

[saltygills]

3/8 ratchet with 3/8 extension. Buy one get one. Around 125.

I picked this up last week also...pretty solid deal

 

[j50cal]

New (to me) platen table....now just have to get it off the trailer...

 

[G1GRANDEUR]

Fresh off the delivery truck yesterday, didn't even get to play with it at all had to leave.

still waiting for mine. too bad they discontinued top rubber mat.

 

[afazz]

Proto 10-24mm 1/2" drive 12pt deep socket set from Zoro (they forgot the 16 but they are sending one), a few more Hansen trays, 5/32 and 1/8" deep and shallow sockets from Williams, Armstrong, and Proto to round out my set, Snap-on metric low profile ratchet and socket set, Snap-on 9mm and 10mm hex bit sockets, OTC leak down tester, and some random hardware.